FS2CREW: LEVEL-D 767 (FS9 Button Control)

Hi everyone!I have a problem with TCAS. The first officer does not turn RA/TA mode on when I do the RTO brief. I have used FSCrew for a while now and TCAS has worked OK before. Now I can't get TCAS in RA/TA mode when FSCrew is active. Or in fact, I can activate it at first (even with FSCrew started) but after IRS has aligned the First Officer turns TCAS back to "XPDR Only" position and keeps turning it back to that position if I try to activate RA/TA mode myself. To be clear: this selector I talking about is in the "Transponder TCAS Control" panel on the pedestal -- NOT the EHSI TCAS On / Off toggle button.I once activated FSCrew right before take-off (following the instr…

I had been using fs2crew and the 767 for about 10monthes and today the 767 Configuration Mangaer would not open so i reinstalled the 767 and everthing works fine exect this.................... When i try to set the panel files it says that it cannot find the panel_normal panel_vc panel_vchr when i look for them they are right where they should be in C:Program FilesMicrosoft GamesFlight Simulator 9AircraftLVLD_B763PanelPanel Optionscould someone help me get my 767 running with fs2crew again

There are emergencyes like engine stop or fire in flight?Or engine stop after V1?Does somebody have a list of posible emergencys that could happen with fs2crew 767?than ks a lot

A friend came round the other day and said he had put a new utility on his LevD767, which was wonderful.The file Level-D767-Undockabl-Panel-V1-2 I was informed made the Co-Pilots gauges available as undockables, so you could have the ND and map at the same time. Now the problem, having installed this, we find I have lost FS2Crew facilitys, namely the hand has gone AWOL. Now as I have'nt uninstalled FS2Crew what is the best way to get back to Status Quo.I dont fancy re-installing it and its upgrades plus the british voice set and its upgrades if it can be avoided.Regards JohnT

Where can i find the Features of update 2?thanks

Any sound in Spanish?

Installed FS2Crew 767 onto my new computer, and everything works fine apart from FO does not say Stabilized. I perform reject Takeoff review on being given permission to line up by ATC, then when lined up, ask FO to set to 60%, which he does, but never does he say stabilized, I have waited for ages before pressing N1 but to no avail. At 80 knots FO comes back to life and works as he should. 80 knots V1 Rotate etc.I have tried installing and reinstalling LVLD 767 and FS2Crew but still get the same problem. This is the way I installed LVLD 767 and FS2CrewInstalled LVLD 767Installed Service Pack 3Installed FS2CrewInstalled update 1.2Any Ideas ?

Hi all,I dialled 130.65 during pre-flight, made it active and pressed 2nd key. No calling to Servisair Load Control was heard. Same thing happened when I dialled 131.85 during flight and called Jetset line. I got the latest update of FS2Crew. Also, I did not get the clearance from ground crew after push back and engine start. When I touched down at destination airport, the disconnect clearance from the ground crew was heard, then. What have I done wrong ?Daniel

i load the demo flight and when i click the clock button everything goes black and fs crashes. i installed everything correctly. is there something i can do different. i have the update 1.2 installed and went through the config manager so. if someone could help that would be great thx

First, what an incredible product. I bought the 737 then the 767 and probably will buy the 747 FS2Crew shortly. Unbelievable! LOVE IT.One question that I searched the forums for and did not see - sorry if I missed it.After lining up and hearing the RTO check and following the procedures I do not hear the FO call any speeds or positive rate and he does not raise the gear. Nothing - the main button does not seem to work and all I hear on the secondary is check, check, check..... Any suggestions.ThanksWill Chambers

Wow. Now that I've got a new 5.1 home theater with a good subwoofer connected to my PC, I need to edit the soundset for FS2Crew so that the lower frequencies are cut off completely from the crew voices. These guys have a really deep voices that make the bottles rattle in my bar cabinet

Hi all,just installed FS2Crew plus update 1.2, this is my second, after the B744. There are no cockpit clickspots on 2D and VC. All actions properly followed, including FS2C panel.cfg selected in New Center. Level-D B763 version 1.3 fully airworthy. Complete reinstall of the aircraft and program did not help.Advice please, thanks.

Hi,The ZFW on the load sheet does not natch the real ZFW of the aircraft that is displayed upon starting the flight.The passenger count is correct and I've saved, as statted in the manual, the profile in the LevelD configuration Manager befor starting F.S.Other addons that I use like FSKeeper report the correct ZFW.Tx,Mike

Hi guys,First of all I would like to congratulate the developing team of FS2CREW for their great Job with the LD767. the question I have most probably has been posted before but I was unable to find it so, here it goes:Can we hear the cabin crew during the safety briefing to the passengers?The first time I tried the tutorial I had a bird carsh. The second I did not. Is this a random event? Can it be configured? All the other Lvld malfunctions are moddeled into FS2Crew?Tx a lot,Mike

Evening all!!Is it possible for someone to give me a link for a weather map of Europe so when I check the weather from the start center i dont get a map of the USA?Thanks very much for your helpRichard

Hi,When flying at night I can't see the pop-up windows like FO. Is there a light switch to turn them on somewhere? The master panel is illuminated but not the others like the ETOPS.Paul

Hello,This is my first time posting on this forum. I purchased the Level-D 767 back in June and love it! Just about an hour ago I tried to open up FS2004 and received a pop-up box that was titled "Level-D Simulations Module" and under that it said "Bad Licence for B767-300,FS2004 will now quit." I clicked on the OK button and the splash screen for FS2004 closed out entirely. I tried rebooting a couple times and keep getting the same pop-up and FS never gets to finish loading. I have purchased this product and have the registration for it and everything else that came with it. I am not very PC orientated, so I apologize in advance if I am not being specific enough. Any sug…

Hi,I've noticed this tonight on a flight. I enable the speaker to hear flight attendant's annoucements to the passengers.When at cruise altitude, I call the forward FA to tell her that we are now in cruise.A few seconds later I hear a male voice saying : "Ladies and gentleman, this is the Captain Speaking, we are now at cruise altitude bla bla bla".Is it really the captain (me ?) speaking or is it a Male Flight Attendant ?When speaker is off, i don't hear thisStephane

Hello Byran,after a few weeks with the ATR, i tried the 767 again. It

I need some help in determining my problem. I just purchased Level D 767 and FS2Crew. when I load everything and Press Shift+5 or 6 or anything for that matter in order to get different panels Fltsim will lockup. Maybe after a minute or two the response will come. Any help would be appreciated.Thanks in advance.Harry

Hello BryanOne of the features bothering me in FS9 is that you're not able to pull the weather (ATIS) for your destination until very late in the descent. Activesky and real weather on the net offer some workarounds, but I don't always use Activesky and real weather reports don't always match the ones in the sim even if you are using real weather processing.I wondered if it could be possible to get the FO to pull the weather for the destination - when commanded to do so or well before the descent begins? What I'm thinking about is some kind of an ACARS style paper sheet with a METAR on it. I believe the weather info is something that can be read from the sim at any given …

Bryan,Love this 2crew, got the 744 version the other day too, unfortunately been at work to much to try it out yet!Request for the LDS767 version though....Can we have through flight support (as per the 737 version). I know that First Choice would rarely do this due to sector times (crew limits) but when the 76 is used on domestic or shorter international legs the crew rarely does one sector only. Qantas for example use the 767 on the 1hr SYD-MEL and SYD-BNE sectors in peak times. They also send them over to the west to PER, and return with one set of crew.Thanks again!Ben

hidoes anyone know all the british airways 767 routes as i am trying to get all of them to program them into the flight managment computer, if anyone here is a pilot with british airways i would also like to know how british airways names their routes in the FMC, if no one knows all the routes could someone tell me someone who does or where to find them online. Most flights will be out of gatwick. ThanksJohn

I just purchased FS2Crew 767 edition. After the install, i started fs9 and noticed unlike the 737 edition, no panels popped up. All are activated by hidden click spots..cool.My question is, if i want to take the 767 out for a quick flight using the normal LDS startup procedures instead of the involved FS2Crew procedures,is that still possible?Thanks for another great product!!

Hellowhy does the Failure option in Level-D droplist in FS become disabled..? does that mean that cann't define failures or repair? or FS2Crew has its own failure option??is there an add-on that makes the plane come to a failure due to a wrong action and a true fact OCCURed? like high temp or oil/fuel leak... not a timer or a random failure(like bad luck)thx