FS2CREW: LEVEL-D 767 (FS9 Button Control)

FS2 Crew Developers,Sven Goeriche successfully modified the Captains View for his widescreen Display Panel Cfg for FS9 and FSX LDS 767.This is a breakthrough for Windscreen owners. Please review post under title "2D Panel in 16:10" 02-02-2008 regarding Sven modification in Level-D forums.I wonder if "FS2 Crew" will it work with this new Panel for LDS767. ThanksSanal

Let's say for example I would like to continue the second part of a flight or a second leg. Do I have to run the Termination Procedure and start Fs2Crew from the beginning or is there a way to reset the Clock after Shutdown?

Hi,I wish to purchase the 767 Edition and already have the PMDG 737 edition so I downloaded the coupon. However, when I run the installer the coupon says it expires on 1/1/08.My question is will I still get the reduced price if I go ahead with the purchase?ThanksKeith

Dear Friends first of all congratulations and thank you very much for your excelent addon.I'm having an strange panel behavior when I'm in 2D view.I'm doing the SFOLAX tutorialOnce I've got clearance to taxi, I activate my flight plan, suddendly during my EHSI and my panel changes as if it had no plan activated. (no magenta lines), or appears my FO panel (as if I had pressed shift+4), it takes just a second... a blink of an eye... And it normally happens when I've got my FMC window open (I open it trhu my FSUIPC programed key press, but FO's panel I just press shift+4, no FSUIPC key press)Of course I've got LDS767 SP3 and FS2Crew 1.3 update installed and config manager ex…

I finally had a drunk, disruptive passenger on a flight from Miami to Princess Julianna today. Nice touch of reality. I had to divert to San Juan and the drunk was arrested. LOLDave F.

I wish to buy the fs2crew for the level d 767.I downloaded the coupon (it'a jpeg image,right?), ran the e-commerce wrapper, input my card no+code and hit buy.The screen works through the first two lines, but then this erorr message-"invalid or expired coupon". Previously, I had used the coupon when I bought the atr fs2crew. Why isn't it working now?And while we're on the subject. I just bought the level d 767. Do i have to install the sp3 for it? I know this affects the working of fs2crew for that plane.Eytan Ornstein

Jim, I needed to delete/rebuild the FSUIPC.ini. file to fix a problem with the LVD 767, however, it's caused problems with FS2Crew.Instead of a square control window, I now have a green banner along the top of the window about 2-2 1/2 inches thick and the lettering is unreadable. Do I need to re-install.OOPS, just realized I posted in the wrong forum......DHOOOOOOO!Dave

Is there a place where I can get correct SID/STAR info for FS2Crew for the U.S. airports I fly out of? Also, is there a way to change the flight number FS2Crew uses? Example, (I know this idea has been suggested for the airline before) I'm flying AAL64 from KJFK to LZSH (Zurich, Switzerland). Yet, the voice sets still use Jetset 266 and the paperwork generated by the program doesn't have LZSH as the arrival point.

Before T/O Fs2 active FO gives 60% power call out for "engine Stable" Then I click N1 for full power.Recently, engine reaches only 58% power not 60% and FO doesn't give "Engine stable" call out.What happens when engine doesn't reaches 60% power and FO doesn't give "engine stable" call out.How can I correct the situation?ThanksSanal

I would just like to take this opportunity to tell you guys at FS2Crew how much I've enjoyed all 3 of your products (737NG, ATR and the 767LDS). They make flight simming an new experience. I do have a couple of issues and perhaps you can tell me what I might be doing wrong. When lining up on the runway (before takeoff checklist has been executed) I will click on the RTO review on the briefing panel as directed to in the manual. As the last couple of words of the RTO review are spoken, the captain calls for 60% N1. This is without me hitting the MAIN button. When it first occured, I thought I must have pressed it by mistake but it is occuring everytime when I press on the …

how do you get the co route to put in the fmc i did the toturial, but now i am trying to fly from klas to kden help pls and thanksjames

Hi there, after much consideration i finally bought a copy of FS2Crew for my 767. Install was a breeze and i found that the tutorial was a great help. Thanks in part to having 600 odd hours in the Level D 767 it was not hard to use the tutorial on a line flight for my VA instead of the route used in the tute. One thing i noticed and have seen mentioned here is that when flying from the UK, there is an issue with the captain not releasing the ground crew before departure. Is there a fix for this? It may be my warped sense of humour but i have visons of this poor crew chief being dragged by his headset along runway 9R at Heathrow on takeoff and dangling outside the aircraft…

Hi, I just installed FS2Crew for the 767-300. So I start a flight, and import the FS2Crew panel state. Press okay, panel loads, engines shut down, etc. Then if I switch views, when I try to go back to 2d it doesn't work. Like I will be in spot view and if I press S to get to 2d, nothing happens, game just freezes. Then I press S again, and it goes to VC, like it's skipping the 2d. Also right-clicking and trying to select 2d panel that way just freezes the game until I select a different view.This is with FS2Crew 1.3 and SP3 for the 767. I'm also using Andre's texture mod.

Hey all,Got a quick question, Does anybody know of a flow chart which outlines everything the captain has to do throughout the whole flight, I am aware of the ones on AVSIM which are great but unfortantly the F/O doesn't switch the Isolation valves on before start-up, and it doesn't state that the Captain does this either, it is however outlined in a few checklists that this is done during cockpit preperation.Anyway, anybody got any tips or hints for this?Matt

Bryan, any plans to update FS2Crew with some failures, such as engine fire, at least announced by the first officer? ("fire engine number 1!").Thanks,James

Hi there, I hope that someone can help me with this problem. I bought the LDS767 and FS2crew when they first came out and had lots of enjoyment with them. However, I have had to reformat my hard drive and have come to reinstall them. The 767 works as normal but after I have installed the FS2crew and run it, I get no figures for the servisair call, just 00 and 00 given to me. I have ran and saved the config manager as requested. Has anyone else had this problem and if so, what is the solution ??? I have tried looking for the payloadlist figure as stated in the quick fix in the manual but can't find it anywhere. Where is it stored ? Hoping someone can get me back to…

Hello Bryan,shouldn't the copilot turn off the center tanks when empty?Regards,Robert

I just want to say I just got FS2Crew for the LevelD and I'm loving it. Still trying to get the hang of it but enjoying the learning experience.The problem I am having is I downloaded the 1.3 update and I ran the configuration manager (I think..I mean I opened it up and clicked save settings), but I'm not seeing the Mode Announce buttons where they are supposed to be. Am I doing something wrong?Any help would be appreciated.Thank you,Frank

hello,is there a known conflict between the fs2crew edition for the LDS763 and SB3?I'm just asking because without SB3 I get a constant FPS of 35, when connected to SB3 my FPS drops by 20 (TWENTY) back to between 10 and 15.After closing SB3 I get the normal FPS of 35 again.Any ideas?Regards,Robert

Hello,is there an upgrade for the ability to perform hand-flown departures without automatially calling for the autopilot?greetingsMarco

Hello all, sorry if this has been asked and answered in the past. I have searched for simular topics but cannot find what I'm looking for.I had a flight yesterday using FS2Crew LDS edition, and I kept on hearing the FA announcements within the cabin, like the safety message, and other announcements along the way. However I've only head that once, and all my other flights I cannot hear any announcements. Am I being silly and just forgetting to set something? Thanks in advance for any helpSam.

Hellofs2crew dont start when clicking on the airspeed indicator...I have instal al lot of times service pack 3 level-d and fs2crew+update.And i have running de config manager after setup and has installed at the leveld update>fs2crew order.And my panel.cfg are edited by fs2crew.I dont know what to do now...please help me

Just wondering if there were any plans to update FS2CREW for LDS767 when the 767 for FSX is released.Thanks

BrianNow that LDS has relelased the FSX version, are you planning an update for the 767 version?

Hi,I recently purchased the A320 Wilco version (loving it!) which made me purchase the PMDG 737 version. Now I want the PMDG 747 and Level D packages as well :)) But I have 2 questions - 1) can you do through flights with both these versions and 2) can you fly the aircraft without using FS2Crew?Also q2 appies to the PMDG 737 version as well - I tried this and the sim crashed with a FS2crew gauge error, so I was just wondering if you have to revert to the backup panel.cfg file to use the 737 without FS2crew.ThanksJonathan