FS2CREW: LEVEL-D 767 (FS9 Button Control)

I am experience a problem. After I downloaded new Nvdia driver. I need to reinstall the LDS 767. When I completed the installation, Fs2Crew didn't connected to 767. I reinstall Fs2Crew several times, but LDS767 and Fs2Crew were not communicating. What am I doing wrong? Will please advise.Sanal

No matter how hard i try i cant get the click spots to work. I've reinstalled both the 767 and 767 fs2crew several times. Please i help and yes i go to the congiuration manager and press save as per the install manual. Thanks

Hello guys,Since recently my virus scanner is reporting the file fs2cchk4.dll in the map windows/system32/ as a virus (Trojan Horse TR/Crypt.np.gen). (When scanning no other files are detected)I had troubles running fs2crew for the lvl-d 767 last Friday and my guess is that the scanner deleted this file. I reinstalled the program with the newest update.Now when I start windows or when I select the B767 in FS I get the virus popup and I need to reboot the system (Fs just don't seem to like the popup, so hangs completely, nothing I can do)I have no problem to run FS without the virusscanner, but I want to ask why I get this detection since a week now, and not before?Is the …

Probably an easy one this...but my master control panel on FS2 Crew is missing the "M.Anc" button. In its place is the "N-Norm" button. As a consequence, all my mode changes go unannounced. A smaller version of the M.Anc panel does, however, appear once I have carried out a manual event.Any ideas (screenshot available if required)?Many thanks in advance.

Quick question here and I might be being daft but having amended my 767 cfg. via the manager, I no longer have the settings for the FSCrew training flight. Is there anything I can do short of reinstalling the package to get them back again?Thanks

I note from the manual that there are only a select number of situation files that can be used. (I turned to the manual after having saved a fs2crew flight which, when trying to load up FS9 at a later stage to resume the trip, simply crashed the sim citing an fs2crew guage38.dll error)Is there anything that can be done about this?Thanks!

Hi, have just had to reinstall the 767 and FS2crew after a strange series of CTD. Now when I start a flight I apparently have "0" fuel onboard and "0" passengers !!I ran the config manager so its not that.On a search I found others have experienced this and wonder if anyone can tell me how to overcome this problem ?Thanks.JohnCore2 Duo 66002048 MB DDR160GB HDDNVidia 7950 512mbSaitek Flight SystemHead TrackerRC4AShttp://fs2crew.com/linepilot.jpg

Hi,In the APP Briefing flow, is "NAV1 TO MAN, FMC FIX=NAV1" a must-do for fs2crew, or just a procedure in real world?Thank you.TCC

Bryan,Do you know if it is possible to find somewhere other callsigns besides the default "Jetset 266" or the British?Further, are you planning a 767 update where one can choose the airline and the number of flight?Thank you very much,James

Here comes part 2 :-samurai

When I try to install FSCrew, it puts up a window that says the registry can't find FS9 or its not installed...anyone have any ideas? I know I have the updated SP3 for LVLD...thank you all for your time!Danny

If I have setup a flight where the plane is placed in such way that no pushback is required how do I do? Can I skip the pushback? If not what option do I have?

Hi All.Thanks in advantage for your help.I try to use FS2CREW on IVAO connection, flying all around Europe. For example I try to fly TORINO-ROMA (LIMF-LIRF) twice, or LIMC-EHAM (MILAN-SCHIPOL). I alway used IVAO CONNECTION, ACTIVE SKY, FS2CREW for LEVEL-D 767 of course. Anyway, in these case, always, FS2004 is unexpectly closed. I don't understand why, but at the beginning eveything seems OK but while I'm reaching my level cruise or during the cruise or during my approach, FS2004 is closed. I think it could be some conflict with FS2CREW and my add-on like ACTIVE SKY or IVAO. Is it possible?My PC HOME is new.This is my configuration:MOTHERBOARD: ASUS P5B DELUXEPROCESSOR: I…

delete please

Hello again...This is probably written somewhere in the manuals (i haven't had time to read trhough all of them) but i'm unpatient to find out... Is there a possibility for Fs2crew to model alot of departures and approaches for different airports that aren't those already exisiting? That is, is there a place where I can download the .wav files (or any other one) and update, in a sense, FS2crew for it to recognise SIDS/Stars for other airports (big or small)???Thanks for the info...

Hello...I am new using FS2crew for the 767 PIC...After around 5 minutes in the F/O check, a loud background noise appears in the background and remains until 0 minute. I have the impression this is cos' there is no air, or APU is off... Even after turning them on, the sound will remain...However, i realized that if I import the tutorial panel situation, then i won't get this problem...Has anybody encountered the same problem, and does anybody know what i need to do to solve the problem...

Hi Bryan,I recently saved a situation file for the LVD767 to enable me to start fs2crew at the "ready to push and start" point.Upon trying my saved situation and following the manual instructions carefully, I have found that all works perfectly until it is time to enter the runway, when all fs2crew contact is lost. After successfully "seating the cabin" no amount of Main or Sec button pushes brings fs2crew back.What have I missed Bryan.Brian(Cheltenham UK.)

Hello thereI have a

Hello thereI have a

I use both FS2Crew and FSPassengers. For the 767 Edition, I know that many of the numbers on the load sheets and read backs are actually real. The only catch is that I let FSP load the aircraft so I know the weights are accurate to the passenger load. I can use the FSP numbers and have no problems with the flight but is there a way to have FS2Crew read back these numbers too?Ryan GamurotLucky to live Hawai'ihttp://www.precisionmanuals.com/images/forum/supporter.jpg

Hey Guys,Is it possible to delete the panel from the virtual cockpit view in the panel.cfg and still maintain that view (i.e., No VC)? The virtual cockpit view is covenant for setting viewpoint for takeoff and landings in Sims' where instruments are docked on other screens. Our sim is built on LevelD 767 and GF equipment.ThanksRick

Sorry if this is a silly question, but whenever i do a manual departure and have the aircraft in a clean configuration, if i press the primary or secondary button, it will ask for hdg select, flap retraction etc. Is there a way after i have manually cleaned the aircraft up for me just to go straight to after takeoff checks. I have chosen manual departure in the takeoff brief.Brad.p/s will there be anymore updates for the 767 version, fantastic product i never fly without it!

Hi, have recently purchased the 767 version, really dont know how I flew without it !!My question relates to non norm events, when I activate the broken wind screen button the FO reads the checklist etc but no crack appears in the screen.I imagine this should happen ? and if so can anyone point me to a solution?Thanks in advance JohnP4 3.2 HT1 G RAM320 G HDDGeforce FX5200 http://www.oncourse-software.co.uk/forum_i...ersupporter.jpghttp://www.hifisim.com/images/asv_proud_supporterhttp://wwwprecisionmanuals.com/images/forum/supporter.jpg

i just purchased FS2Crew 767 the other nite, but still haven't been able to use it. after installing and updating to 1.3, i went into the config manager and set the panels to FS2Crew. upon inspecting the FS9 aircraft folder, it seems that the main "panel.cfg" wasn't altered, but i can see that the other ones in the panel options folder were updated (panel_normal.cfg, panel_vc.cfg, panel_vchr.cfg, or something like that).my question is... can anyone provide me with what the main "panel.cfg" file should look like after installing FS2Crew?thanks for your help!

Hi folks,I seem to have no clickspots when I start the tutorial flight - I cannot start FSCrew...Installation went fine, and I also ran the Config Manager afterwards...Any suggestions?Thanks in advance!Tom