MS FSX | FSX-SE Forum

I have just downloaded this GREAT panel and aircraft. I can't figure out how to start the engines. I have read all the manual, but it is unclear to me how to do the procedure correctly. Anyone else have this problem? Please help! Thanks,

Just recently, I have had problems getting last minute ATC / Tower landing approach - r/w clearance / selection changes; ie: ATC Approach directs you to a r/w from the normal 50-60 miles out, vectors you around to the final. Just as I'm getting handed off to tower - I'm told to enter a left d/w pattern for the opposite r/w.This used to happen sporadically. Now, last 3 flights into this one airport - happening everytime.And, to check myself - after d/l'g Real Weather, I went into weather / advanced and checked the wind conditions at both departure & arrival airports. Both showed correctly - however, the ATC approcah control arrival still vectors me around to an opposin…

When I start fs2002 I get the following erroe message:Scenery.cfg error! Caching in section cache.000 requires both local and remote paths. I can click off the error message and fs2002 works but at a lot slower frame rate. David AlbrightFAA Flight dispatcherSingle and Mult-engine rated pilot500 hours Real PIC2000 hours Sim PICSim Test Pilot

Hi all, I was under the impression that in FS98/FS2000 that when u recorded a video at at 5 sec intervals, it gave u a much larger file size, but much better playback quality. I used the recorder in FS2.2 for the first time yesterday, and did a bad landing (well half off and half on the runway) but when I played it back it played back at 100 miles an hour. Is there a fix for this...Thanks ChrisOh P.S, The reason I landed half on, half off the runway is that the VFR panel on the particular aircraft/panel I was using, means I carnt see what I am landing on. I seem to remember on FS98. you could lean down on the POV hat swiech a touch, and it bought the runway into view. Is…

Hi AllI installed the unique Fokker 50 project Yesterday, I have one problem with it.I can't dial in less increments that 10 degrees. How do you dial 1 degree?RegardsHenrik KorningBGGH

Hi there! I probably have the worst prob with FS 2002 ever seen. My FS 2002 is totally messed up. :( I seem to be facing real graphic problems ... the cockpit view including the panel aren't displayed as they should be!! :-zhelpMy system:P4 1800 MHz, 1024 MB Ram, 60 GB Hard DiskNvidia GeForce 2 MM/MX 400 (29.42 drivers)Windows XP Home Edition, Direct X 8.1Has anyone experienced the same problem? I guess not, but I would be great if someone or all of you could help me. 'Coz Microsoft TrainSimulator is working perfectly, so why not FlightSimulator too?Greetz,Chris

Downloaded RivaTuner. I can't find a users guide. Is there one?Would one of you nice people be willing to show me how to use thisutility?Sys: AMD TBIRD 1 GIG MHZ 512 SDRAM Biostar MB 20 GIG HD GEFORCE GTS PRO 64MEG RAM VIDEO CARD VIEWSONIC 21' P810-4 MONITORThank you very much.Jim Alcorn

Can someone point me in the right direction here or explain why their is such a difference on the HSI heading indicators between the default aircraft and the F50 panel?When I load up FS2002 with the default B737, on runway 36 (approach course of 002), the HSI heading indicator shows a heading of 001. When I load up the F50 panel, on the same runway, my heading is 008. As you can see, both aircraft are lined up with the runway, but both show different headings? Is this a bug, do I have something not set correctly on the F50 Panel?Thanks..

Hi SteveThanks for posting the seattle area. I must have been using 90m source all this time. The detail of your 38 stuff is incredible!!! Ive got the rolling hills and true elevations. A truly different experience all together. I do have one question for you. The "Terrain Mesh Complexity" slider. I am not seeing one bit of difference between 20% setting and a 70% setting. I have always left this low because I could not tell any difference except for a teeny FPS gain at the lower settings. Can you elaborate on this if you get some time. Left my email at your site as I do wish to purchase the west coast mesh.Again, thanks so much for your time and effort. Happy 4thRegardsB…

Hellow folks!This is the great RJ85 AVRO from the genial MIKE STONE, and here

hey folks!i'm running fs2k2 since december without any problems but since last week, it takes the sim nearly 4 minutes to select an aircraft! what can i do? thank you!greetingspeterps: i'm sorry for my bad english! => i'm worse at what i do best...

Hi everyone, this is a bit off topic but since we all download so much I figured this would be the best place to start. Here's the problem. All of a sudden when I download something instead of Windows or Internet Explorer asking me what I want to do with it, the download just starts and then my Winzip pops up when its finished. I like to put my downloaded zips into a certain file, but now it just sticks it in the temp internet folder. Any ideas? Thanks in advance.

the movie, "Murphy's War" with Peter O'Toole? Then you'd remember that scene with the airplane. Anyone know what that was? I'd LOVE to add that one to my hangar!Cheers!Heather

I'm considering buying this package and thought I would check here for opinions first.Thanks in advance to all who respond,

Guru's,Here's my situation - I have a Motorola Surfboard (SB4200) cable modem (using the USB connection), Win XP Home. I connect to the web without any problems.I purchased the Linksys Etherfast DSL/Cable router so I could network 2 additional PC's for the purpose of installing Project Magenta software.After following (meticulously) the instructions of the Linksys I'm unable to connect to the web. I've doubled checked all of the settings, DHCP on the router, Modem, auto set IP, etc..Next, I figured, let me install a PCI NIC card. Setup the card to auto set the IP, DHCP, etc. Still unable to connect to the web. On both scenario's the router see's the LAN (IP set on lo…

I was wondering if anyone else was having trouble with FS2k2 in full screen mode. I just reinstalled FS, and recently reformatted my PC. Here are the system specs:PIII 600mhz192MB PC133 RAMNvidia TNT2 Pro (32MB)WinXP ProThe only thing I can think of is the newest Nvidia drivers which I installed. Prior to that I was using 2.1.8.3, which worked fine. FS works just fine in windowed mode, but if you Alt+Enter the screen goes blank and my monitor no longer is getting any signal from the video card. Doing Alt+Enter again will take my back to windowed mode just fine. I'm going to roll back to the old driver and see if that makes a difference. Any ideas guys? Thanks!Paris

I have searched the library here for a AFCAD for KMSP and have come up dry. I am using MSP scenery by Ron Ackerly(msp2000.zip) and would like to have a AFCAD for it as I am using PAI.I wouldnt mind if I could get a AFCAD for the MS default scenery.Thankshttp://www.flightsimnetwork.com/dcforum/Us...9d503cc53ab.jpg

Could someone please e-mail me their lear45 "sound.cfg" file? I accidentally overwrote mine with one that points to itself. I've got all the wav files. I just need the [email protected] in advance.

Nearly there, just need to resize the flag on tail and some small details, the wing root will be white but there is nothing I can do about that...And you guys and gals across the water enjoy your Independence Day!regards:-cool

When i have all the reflections on, as in Aircraft and water this is what i get: Pic #1 looks to be normal? But, Pic 2 shows the whole horizon line glowing? Is this right?#2 Aperture size in bios for Vid card? 128 or 256? See specs below...Thanks and have a great forth!Ed (The other Ed):-beerchug P4 2.2 GhzAsus P4S533Samsung PC2700 DDR 512megsPNY G/F4 TI 4400 128DDRXp Home (Clean Install)

in a couple of weeks i'll be flying on a United 777 between KORD and KLAX. i was wondering if anyone here knows what their preferred route on this flight is....or maybe somewhere online to find this? also, i know that i can listen to ATC on my UAL flight, but is there also a screen to monitor the flights progress?its been awhile since i've flown on United so i'm kinda clueless as to what to expect.thx for any info!chris

Can someone point me to a good tutorial on flying SID's and STAR's? Thanks much!Gary R

I'm truly baffled. All of my POSKY 767 AI planes never make it to takeoff at KLAX. They receive clearance, taxi instructions, taxi to the active (holding short), receive takeoff clearance, then disappear! :-eek They don't even taxi onto the runway, just BLIP, gone in an instant. The really bizarre thing is that it only seems to happen at KLAX! None of the other AI planes behave this way.The tower clears them for takeoff but always seems to cut themselves off. For example, DELTA 1244 CLEARED F... and then, POOF!, the 767 is gone into thin air. Not even a readback!I have tried the same flights at other airports and they are fine. I have not yet tried flight at other…

Just purchased the above and after all the chat about the co pilot awhile back I was expecting to see her in the vc cockpit when panning the view, she is gone but when in the exterior view she is there with this other guy. Do you think it's my breath or something else LOL?Is this normal or is there a setting I missed?ThanksCharles

Hi guys,Is this just happening with me or is it just all the time with all other users, that the "lago ftp" downloads from www.lagoonline.com don't work and display "the server is actually busy... please try again later"? I've been trying to download some stuff there that are only available from the "lago ftp" for more than a week and they never work. I've contacted them but they still haven't replied. Do you guys also have this problem when trying to download stuff from www.lagoonline.com ????Best Regards,Asim Daffa :-kewlVP, Fleet - Senior First Officerwww.sv-virtual.com