MS FSX | FSX-SE Forum

I installed the Red Arrows planes (the complete package). It is a beauty. My only problem is that the landing gears don't display in the nine plane formation. They do in the 4 plane configuration and the single version. Has anyone else had this problem? If not what am I doing wrong? Thanks, regards to all. Bob.

Do any of you guys know of a decent 737-800/900 panel out there. I cant seem to find a good one anywhere. Thanks.DAVID C. FREEMANCONTINENTAL VIRTUAL AIRLINESHouston

Just thought I would let everyone know as I have seen no mention of it. Looks real good too.

Hi everyone,I wonder how to land with 200fpm and tuch down like silk. When I use autoland it never gets the plane down like silk, but the airbrake works on automatic. When I handfly any PSS or Dreamfleet plane on final, I somehow cant get it done with 200fpm. Can anyone here tell me how to do it? Lago maintenance allways complains about a to hard tuchdown!

I think the project airbus A320 is a fantastic airplane. Im enjoying it tremendously. I have the basic skins for the Factory bird, BMI, Air Canada and a Philippines Airlines bird. Are there any more around? Thought I saw a US Airways Shuttle skin somewhere under construction.Eric

Hello all,This week was very sad, b/c DF decided to cancel thiers A340 project. I fully understand thier decision. It come to my attention that Apollo Soft. is making FBW. Does anybody hos more info? Is that going to be A320 or A340? Did anybody seen any screenshots, or previews of that product? How would you rate that (Apollo) company? Thank You. All the feedback is appriciated!With the best regards,Andrej Lippay :-wave

Can someone tell me where to find this? A search of file library turns up dozens of Splash Screens, but no clue yet on the randomizer..Thanks, James J

HI everyone, I was just wondering if you find it difficult to maneuver a 747 for landing. I've flown narrow bodies especially the 757 most of my FS career, and I decided to try out the 747, and I found it a lot trickier to land than my good old 757...TIMMY!!!

Can the FS2k2 ATC say "Speed Bird Concorde" ? If so, what do you need to set your settings in the aircraft.cfg file?[br][br][div align=center][br][link:members.cox.net/fstimes/wetimage.html]Weather Image of the Day!

Can anyone tell me how to do repainting of this great plane. I don't have any experience in doing this and I would like to learn. I already downloaded the template from simubuild for repainting. I do have paint shop pro 7. After you repaint the template, how do you get it to the airplane in order for it to show up in flight simulator. Any tips or help would be grat!Matt

Well folks, I did it! Got a job in Whitehorse, and I am moving to the Yukon this month. Would love to see the scenery in the area improved. The airport is pretty much all that is there - the city and Yukon river, and dam and lake are missing. Is there a quick and easy way to render the terrain for this area ala Terrascene? I have never done so, and frankly will not be able to any time soon, (Moving details - selling house, getting there, starting new job!) but if you know of a way, or someone who does this, I would love to see the surrounding details improved near my new home airport!!ADVthanksANCE

Is there any fixes for Paul Golding's panels that upgrade them to FS2002? There are numerous guages that fail to work in FS2002... has anyone tweaked them yet? I am looking for both the MD-87 and MD-80. Andrew [email protected] THE RED WINGS RULE! http://www.duncanfuller.com/d21tracon/logo.jpg"Skate to where the puck's going to be, not to where it has been." - Wayne Gretzky

Hi everyone.Does anyone know if it is possible to chance the frequency of a vorstation, and equip it with a DME.This has happened in my local area, and i would like to update my fsif possible.Best regards S.Jensen

Hi, can someone please re-paint the IFDG 757-200 in Air Transat new colors? I've searched all over the web and I can't find one. I've atempted to repaint it myself but no luck.http://www.airliners.net/open.file/245155/L/Thanks, for your time.

In the cessna 172 most of the gauges are missing, and any plane that uses its gauges, those are missing too. I checked in the gauges folder and they all seem to be there. Is there anything I can do without uninstalling the reinstalling FS2002.

Below is a schematic of my attempt at a truly cool running system using stock retail HSF on a P4 2.x system. The system also employs an external Cheetah X15 SCSI 160 drive system that is housed remote from the main PC case, and so does not contribute heat or noise in the main box. The diagram shows a kind of shoe that the very thermally efficient Lian Li PC-68 all aluminum case sits on that conducts air into the fully speed controlled intake fans. This air comes from the crawlspace under my PC room, which ranges in temp from wintertime at about 40F at the lowest to 68F absolute tops in the hottest part of the summer, the case is assured of getting a precooled air yearroun…

Hello,Does anyone have the instructions to building the VRAC Twin Throttle Quadrant?. The kit only came with the throttle instructions. I am missing the instructions to building the Speed Brake, Flaps, and Engine Reversers. The kit is also missing the handles for the throttle arms. The CD they sent contains no data as well. I have contacted VRAC about this and I am awaiting an answer. You would think that a kit that costs over $400.00 there would be better quality control before the kit is shipped.ThanksMichael

Someone mind pointing me in the right direction for the best free-ware Cessna available today?

I just tried to "code" my first IFR high altitude flight by hand in FS2k2, and it sucked! :( What's out there that better for flight planing?[div align=center][link:members.cox.net/fstimes/wetimage.html]Click Here For Weather Image of the Day!

I never had the following problem until today:When I try to download RealWorld-WeatherData it downloads only 35% and then stops (cant cancel, cant quit).Any ideas?

Moral implications aside from buying from Carenado, is there anyone else out there that's having problems with the VC becoming incredibly blurry? Sometimes I can keep it clear if I tune my resolution down to 1024x768 and don't move around, otherwise it gets blurry. Is this a video card question? I have an old ATI All-in-Wonder Radeon 32MB card, 256 MB of RAM, and a 1.33 GHz processor. Would it help to get a Radeon 9000? I can't pretend to afford the 9700, but I'm needing more as of this point. Unfortunately I'd also have to buy a seperate TV Tuner card as I have my computer set up as my entertainment center (any recommendations on a good TV Tuner?)Thanks for answeri…

I am trying ot rebuild the 6gigs of FS stuff I lost when my hard drive crashed.

Hello,If you look closely on the FSD site, there is pic showing the gauges backlighting at night on the T-38. I tried "L" but that enables only the dome light and not gauges backlighting.Do you know the right key to use ?Thanks.Nadege

Hello to all of you guys. Im tired of doing search around the net, trying to find good add on for FS2002. Finally, I have good Ai traffic, real one, good Ai aircrafts, good frame rates, but I have crappy Scenery airports.I have bought a really good pack of the main London airports in the Uk2000 web site, and they are great. But its obvious that I cant afford to pay 20$ for each important airport in Europe, in my case Spain. And personally I think, no one can.I will change, and share my Fs2002 files, with anyone that can send me a really good scenery of Barcelona.Can anyone help [email protected]

Since FS2002 manages to make 3D objects to follow a taxiway, why not make a 3D object do the same thing but while being a FollowMe car. In that way they could dump the ugly pink "progressive taxi" line and replace it with something more "as real as it gets".All the little thing has to do is come from somewhere, go stand in front of you, and just as AI can't run into you from the back, it shouldn't go any faster than you are going but while being in front. Then just folow the same route as ATC has given to you.There you go, can't be quite difficult to program (seen what they can do by now ...)Maybe it's even a thought for some Freeware Addon programmers .. (seen what the…