MS FSX | FSX-SE Forum

Every time I do a campaign mission or two in CFS3, no matter what I try, my campaign wont save itself. I get a promt to save it when I leave the campaign but its never there when I want to load it. Anyone know why? Once in a while, the autosave seems to save it but it seems really random. How can I save my campaign without having to start over and re-enter all my info all over again? Also, has anyone figured out a way to get CFS3 to stop freezing and stuttering every once in a while? It's caused me to crash my plane quite a few times and it gets very annoying. Thanks in advance!

Hi AllAny cure for the taxi shudder that my AI aircraftexhibit. Looks nausea inducing and realism challenging.I have tweaked AI speed up to 20knts straight line andrun the suite of Project AI aircraft ( wonderful job ).So, I may be the culprit.BestGlenn

I downloaded a 757 panel (mz757pnl.zip by Mario Coelho) for a 757 aircraft and it works great, but my altimeter is not reading. I reloaded it with the default 777 panel, and the altimeter reads fine. With the 757 panel the gauge appears to be there but it's not registering any numbers. The same on the right side of the electronic attitude display, no numbers. I'd sure like to know how high I am! Can anyone help?Tripp

I am using FS2002 under windows XP and FSUIPC 2.92. Cloud.ini is as follows: [AutoRefresh]RefreshCloud=onWaitTimeAfterClear=20IncTime=15DecTime=15I start Sky World SE FIRST, chosing anyhwere between 20 sec and 1 minute, but lets say "0.2min". I right click on "Auto" and choose ORDER in the pop-up window and press OK. I LEFT click on "Inst&RunFS" and FS2002 starts up, I get to the "Creat A Flight" screen. Sky World makes it's cool little echo sound once. I check SKY World. SKY World has turned itself OFF (I no longer have my 0.2 min. choice). This happens each and every time I press the "Inst&Run FS" button, SKY World turns the auto function OFF, why I don't know…

Coming into AlbuquerqueNoel

Hi, Lets refresh some Bugs in Fs2k2 Weather for some new user.-Clouds appears stretched if they are too much high in feet (FSUIPC Help to block the Height)-Broken clouds formation specialy 6/8 7/8 appears wrong displayed see below picture (default clouds fs2k2), (scattered, few clouds appears better.)- Black grey clouds in far distance- Some random verticaly stretched clouds- Cutting Line for high level cloudsFs Sky World Se or normal Edition only copy the clouds in fs2002 and are the same created like default and have nothing to do with the Weather fs2002 Engine.If your clouds are too small in your weather setting, they will appears small.FSW Clouds great formation set…

It seems like version 5.2 server go down all the time. If I use version 5.1, everything works great. This is starting to become a weekly event. I'm glad I have version 5.1 and ActiveSky. Kind of wish I didn't upgrade to 5.2.

http://caea.free.fr/en/simu/dhc6.htmlvery nicely done...

Ok, where is the power switch for the avionics? I have not flown the 747 in years and downloaded Meljets new version. I am sure they are using teh standard cockpit. Can anyone help?Thanks,Denny O

Just curious, but I thought about getting the A320 Professional after seeing an Ad in Computer Pilot Magazine. I have been flying the DF737 but want something to cross the pond or to use between LAX, or lets say SFO to Hawaii. Is the real 320 ever used on such routes, or is it similar to the 737-400? Thanks. :-)

Hey everyone. I've always merged the POSKY visual model with the PSS FDE and air files by simply using the old POSKY contact points, and copying them over the default PSS ones. When I went to use Mel's 747 contact points with the PSS FDE file, the aircraft sank into the ground. Yes, I know I could just alias the panel into Mel's 747 aircraft folder, and I know this isn't offically supported, but I like using the PSS FDE and air files as this insures full compatability with the PSS panel. So, after a lengthly discription (perhaps too long ;-)), has anybody made a set of contact points for the PSS FDE file that works with Mel's visual model? (Would love to do it myself, but…

I finally got the 182S to 11000 ft. with help of this forum. I tweaked the mixture control and trim enough to get her to climb at 500 fpm. It took a while but I finally got there. I leveled off and tried to get a nice cruise speed of 120 or so. The most I could squeeze out was a little over 100 knots. My mixture is leaned almost all the way out, EGT shows a low reading so that when I try to lean any further the engine chokes and stalls, my RPM is at 2400, and I am at full throttle. I am also using the Realair 182. Is a little better than 100 about the best one can get at 11000, or can I do something to get the recommended 120? Thanks. …

I need to contact these two fine gentlemen regarding permissions for a package I'm working on. I have sent both e-mails and have not gotten a response yet, so I'm starting to worry I might not have current contact info.If either Mike or Jan see this, could you please contact me at [email protected] if anybody has current contact info for them, I would appreciate it if you could e-mail it to me.Many thanks!

Looks like the MelJet 747-400F is out!!Downloading it now.Lobaeux

I ordered about 1 hr ago with a credit card.. IT said id get an email.. I have not yet.. how long does it take usually

USD MU-2 is very unreal, not even close! Oh yeah.....I downloaded a better panel for it, and the plane wouldn't even turn!!

I wish to know if my configuration is correct. I have two video cards, one on AGP and the second on PCI slot.But, when I see the IRQ configuration both cards are sharing the IRQ (11).Is it correct? or each card had to have thier own IRQ?When I have tried to change the IRQ I have got a message that I can do that,Thanks in advance.Rodolfo

Hi everyone...Just a quick note to keep you up to date on the development of ActiveSky.The next version will be called "ActiveSky wxRE", and will be a brand new add-on based on ActiveSky 2002's core technology (wxRE means Weather Realism Engine). Lots of new features are already done and many more are still going in. Some of the new features include:- Smooth, intelligent visual cloud transitions - finally working!- Offline/cycle file use- Wake turbulence effect- Intelligent turbulence and icing- Microburst and windshear effects- Weather briefing interface- TAF awareness- Automatic changing of weather according to live TAF forecast information or preset/cycle TAF files. …

AHhhhhh! Doesn't get any better than this. :-hah

Dear Chris (or someone who can answer)When I select a cloud pack, say real thunderstorm killer set 1 and then select my favorite aircraft and the airport I want to fly from, it loads up. But when I change to cockpit view the Fs2202 crashes.But however if I do not do any changes to the aircraft (Cessna) and the situation location then there is no problem.I would like to use the selected clouds in the aircraft and the location my choice. How do I do that without the FS2002 crashing? (I have the latest FSUIPC 2.92 installed.)Shri 27-10-02

Vote for your favourite airliner.Mine is the 747.

Hey fellow simmers,Well I spent the good part of the day over in Daytona Beach at the Embry-Riddle campus taking the tours of the different facilities. All in all, I think it was a real blast for anyone with a flickering interest in real world flying

I searched the forum but couldn't find it. I remember someone posting coordinates for a better wingview so you don't have to move backwards. If someone could post them I'd apprecitate it!Thanks![TABLE BORDER=0][tr][td] [/td][/tr][tr] [td] [link:www.fsworldonline.com/~timsfsstudio]Click here to visit Tim's FS Studio!] Updated August 31st! [/td][/tr][/TABLE

Hi guys.... just to remind anyone who has forgotten that the clocks go back tonight. Don't want anyone late for church in the morning :-):-)Pete

Is anyone else not able to get the downloads on FSD's site to work???? I've been trying all day to get the Seneca V and can't get it to download. Is the server that busy????Brian