MS FSX | FSX-SE Forum

Hi there fellow Simmers Does anybody know of an easy touse flight planner program? I used a good portion of the WOAI flight plans but there are a few that weren't in there. I would just like to know if there is a easy to use flight planner to use. If anybody knows of one it would be greatly appreciated. Thanks! Lee

I really need some help here. I am having a problem that is driving me crazy and I just cannot figure out how to fix it. I use Orbx scenery including Base, Vectors, openLC packages and airports. The problem is that I installed some new airports that I just bought and suddenly when I start a flight, all of the ground textures and road textures seem to be underneath the mesh layer. I've gone over my scenery library order and everything is in the order it is supposed to be. I asked an AI chatbot for help and it suggested deleting the terrian.cfg and replacing it with a new one and then using the Sync Simulator option in Orbx Central but this did not help. I've tried se…

I purchased the Track Hat and I have the webcam that came with it, then downloaded FaceTrackNoir . I also downloaded the Code Driver for the webcam. The problem is I'm not getting an image of myself with and without the Track Hat on. When I start FaceTrackNoir on the left box where my image is to be seen I see UDP. The following is what I have ; When I start up FaceTrackNoir the following is what I have; Profile > default.ini Tracker Source ( 1st Master ) > FaceTrackNoir UDP Tracker Source ( 2nd ) > FaceTrackNoir UDP Filter > None EWMA Mk2 Game Protocal (1st and 2nd ) > CSV Flight Gear FaceTrackNoir Mouse Look In the window on the left where my …

Hello everyone, I’m running FSX with MyTraffic Professional installed, but I’m running into a problem where no AI traffic is appearing at major airports (e.g., KATL at 12:00 local time). Here’s what I’ve checked so far: • Traffic sliders are set above 0. • MyTraffic is enabled in the Scenery Library and placed at the top of the priority list. • The MyTraffic aircraft folders (e.g., MT_A320, MT_B747, etc.) exist in `C:\MyTraffic Professional\MyTraffic\Aircraft`. • The SimObjectPaths entry in `fsx.cfg` correctly points to that folder. • Default `trafficAircraft.bgl` has been renamed to `.off` to avoid conflicts. • MyTraffic `.bgl` file…

Hello, does anyone know where I can find the freeware Generic 30cm Tile ground texture packages? I am unable to find them on the internet, the site they used to be at is now gone. I would greatly appreciate it if someone either knows where to find them, or would be willing to share them with me if you have them. Thanks

HI Since one month skyrex force send the bad weather to FSX I have the good airport and the good weather with sky rex force but when it send to fsx I have temperature 22 and QNH 1010 also at the present moment QNH 1023 and temperature is 9 with rain. i don't understand why and you. i have the fsx message that rex injecting weather thanks for help

Hello Co Simmers, I downloaded the very nice LSZB Bern Belp scenery from Wolfgang Allers from avsim library and installed with updates as told in the readme. I use FSX SE, WIN 10 on a machine with i57600, Geforce GTX1050 ti. All went fine, but the scenery shows several great and sharply contoured all black areas on the apron; to see when approaching or in shift F12 aerial view or when parking on èm. New download and installation did not help.The textures listed in the avsim zip view seem completely in my Installation. Some black textures begin with a $ sign, example $panel1.dds ??? I contacted the author, he identified it as a texture problem, that neve…

hi anybody has the afcad fix for elevation problems for fsx fsimstudios tocumen panama i really appreciated if you send me the file

I bought a Grass Monkey odyssey IR clip and PS3 Eye Camera. And have installed Opentrack software. I've gotten it to work with DCS and other sims, but when I try to run it for FSX I get an error message. I set the Opentrack Output to "Microsoft FSX SimConnect" per instructions I've gotten from Grass Monkey. The popup error message is: "Error occurred while loading protocol Microsoft FSX SimConnect. dll load failed: Cannot load library SimConnect.dll: Unknown error 0x000000c1." Is there a How To out there on how to get Opentrack to work with FSX? Thanks, Jeff

I downloaded the FsPassengers and installed on my computer yesterday,but when I tried to unclock the FsPassengers,it said: Sorry, unable to connect to website, please check your FIREWALL and authorize fsx.exe OR disable temporary your firewall. Once unlocked FsPassengers don't need to access anymore to internet (appart if you export your flights). Unable to connect, please check your FIREWALL or INTERNET CONNECTION ! I'm sure that I disabled my firewall and I could connect to the website,so what should I do?

Hello everyone- I recently decided to pick back up FSX to fly some of my favorite old birds. Upon reinstalling the ISG panels I used to use, I noticed that several updates had been released over the years with additional features and wanted to check them out. However, upon installing the isg1891_fsx update, it leaves all of my ISG panels blacked out (PFD's, ND's, Smiths FMC ect.). I followed the instructions on the forum and installed my purchased copy then followed with the update. I even tested it with isg187 update (included with the purchased version) which worked fine after replacing the isg1.gau file but still no luck with the isg1891_fsx update. Has anyon…

Hi all I have a couple of helicopters that have fairly accurate engine startup procedures. When I use weather themes that predict any bad weather the N2 gauge takes ages to increase to the point I have to clear weather themes in fsx and select fine weather then the N2 gauge behaves like lt should Regards Rhys

If I try to keep the ball centered during a level turn in the Cub, I need to use more and more rudder input because the ball will move further away from the center during the turn, which will make the plane bank more. I did some research and it is said that the ball in fsx erroneously responds to gravity rather than centrifugal force. And it does look like that. Is there any way to fix the bug?

The TCAS on the QW146 is not displaying any traffic. To solve this, please follow these steps: Navigate to the SimObjects\Airplanes\QualityWings Avro Common folder. You will find several folders whose names begin with "panel.". Inside each of these folders, there is a panel.cfg file. Back up each of these files before proceeding. Open each panel.cfg file and locate the following line: gaugexx=QwBAe146_TCAS!TCAS, 0,0,1,1 Change this line to: gaugexx=QwBAe146_TCAS!Logic, 0,0,1,1 Save the file after making the change. Once you have done this for all the relevant panel.cfg files, the problem should be resolved, and you can enjoy flying t…

Not sure what is up with it but the plane randomly decides to constraint itself at altitudes when there isn't even any. Trying to force into OP CLIMB is to no avail and it continues to read ALT* on the PFD. Also the plane is absolutely atrocious at climbing. I am not sure if it is a weight problem but the plane after about 9940ft (its some other really specific number too) drops speed insanely quick and starts pointing up aggressively high to keep it level, and it goes into Alpha Floor mode infinitely. And one more thing, the vertical speed knob doesn't seem to work in the A330? When I pull it out to try increase/decrease it it starts jumping randomly between n…

Is there anything I need besides FSUIPC to work in FSX. The only thing it does after it installs is a small popup and no settings page. I have screen shots but don't know how to upload them here/

Hello there i am searching for Project Airbus A320/A321 NEO with Satcom i found many but all without satcom Antenna

Hi everyone, My PC crashed and I had to get a new one, the new PC has Windows 11. I managed to get FSX back up and working with all my addons with no issues except for the Majestic Q300. Each time I select it the game crashes. I have touched base with the vendor and we tried numerous things with no success such as running as admin etc. This is pretty much a last ditch effort in the event someone might have a solution. I have included the appcrash report below, the issue seems to be the Dash8All.gau any assistance would be appreciated. Version=1 EventType=APPCRASH EventTime=133856901641175806 ReportType=2 Consent=1 UploadTime=133856901646716327 Repor…

https://www.flightsim.com/files/file/212442-kefd-ellington-2025-refresh-fsx-circa-2006-2010-johnson-space-center-houston/ Description: This is a freeware update for KEFD, published 2025 for FSX, and includes CVX landclass and ADEX.bgl files for KEFD and surrounding greater area, circa 2006-2010. File includes very accurate landclass fixes for the surrounding Bay Area of Houston, and I added tons of VFR scenery objects, featuring Johnson Space Center Houston. Including: -- Pasadena water treatment facility (Rwy 17) -- NASA buoyancy lab -- Pasadena shopping center off of Beltway 8 -- San Jacinto College -- Pasadena convention center -- Johns…

Hi There- Does anybody have the WOAI file for Delta, United, AA, Alaska? If you could send them to me it would be great! OR if not, if you could let me know where I can go to find them. Much appreciated. Lee

I recently bought and installed the FSR500 plane into my msfs. It flyies well but I cant´t retract the landing gear. In the cockpit the gear lever works fine, however the plane remains with the gear down. Any help to solve this issue?

Hi, guys,I've been searching everywhere,but I cannot find the coolsky dc9 autothrottle arming button=Please.....help!!!!

When I add a aircraft (i.e Mike Stone A320) and then add his name under Manufacturer when I go to the aircraft selection area within the game where you can select your aircraft to fly, I open that menu and scroll down only to find that the name Mike Stone doesn't exist. Am I doing something wrong? If anybody can help me it would be much appreciated. Thanks.

I installed a new texture for FSX CLS A340 It works fine in FS2004, But in FSX i found that the 2 wings are not painted well and needs fix that's weird because the texture works fine in fs2004

Hi there- Im wondering how to make the AI aircraft flyable. I use AirEd to go in and look into the Air file. You have to change the number of something from 2 to 0. I do that but the aircraft still doesnt show up. The ai aircfaft still doesn't show up. Any help wouldd be appreciated. Thank you Kindly Lee