MS FSX | FSX-SE Forum
Subforums
96377 topics in this forum
-
Does anyone know how to make a gauge read more fuel than what's actually in the tanks? Here's my scenario, I have a fuel gauge that reads 187lbs per tank. I would like it to read 2340lbs per tank WHILE maintaining only 187lbs per tank.
-
- 1 reply
- 640 views
-
-
In the library today there is a new soundset for the A320 with CFM engines (file name is a320cfmsnds.zip). I would like to know how close is this to the real ones? Does the A320 "whine" sound happen through out the whole flight (like this download has)? Or does the "whine" sound go away when the engines power down (like I heard with other downloads)? I don't know which one is right. I never heard a real A320 in flight so I don't know which ones are right.
-
Ok so here it is I take of from KLGA bound for KPVD. I have UT at 95%, Active Sky weather, and flying the Flgith 1 421.. I have my FPS locked at 34 and from clearance to takeoff everything is smooth, no drop if fps maybe 1 the most. As I approach the airport in RHODE ISLAND (KPVD) things start changing. I get cleared for VOR DME 16 descent and at about 1000ft msl I save the flight for a later test. Once saved I continue my descent and my fps will be locked at 34fps but there will be this drop that lasts a split second (down to anywhere 20-26) causing the approach to stutter, even at 26+fps. Now when I load the the flight from saved flights Its the same deal. So I compl…
-
i downloaded and installed usa roads and sim loads to 58% then quits to desktop
-
I am just curious I have read some crazy real life episodes where a pilot got into some wild icing conditions and barely made it home..I was wanting to know if anyone has experienced some pretty wild and or worst icing conditions they have gotten into in fs2004 besides the pitot tube freezing. I have my fs2004 set to not prevent icing and in my fsuipc registered version I have it set to 4 for the worst icing conditions.I have read of pilots windows actually turning into a thin sheet of ice they could not see if they put there hand on the window and that the plane has gotten extremly heavy and sluggish and that they have had the engines cobbed and are still losing altitud…
-
- 38 replies
- 3.2k views
-
-
I lost the pilots voice in the settings page. No voice to choose from and no ATC to listen to. Anyone have any ideas what I can do short of reinstall fs9?jeff
-
- 0 replies
- 722 views
-
-
With some concern I see an increase in interest to make a transition from 2D to 3D (VC) only panels.Though I totally agree that VCs add tremendously to the "being there" feeling, I have my doubts that they can be properly used on y computer.And, I wonder how the "VC freaks" use them today.Beforehand I need to say that I have some VC only planes as well (e.g. Ariane's 737NG), and I fly them from time to time. But I mostly use 2D panels, because I see the following drawbacks in using VCs (the following are my subjective impressions):1. The biggest problem is that you'd need one hand more to pan around and simulating head and eye movement:one hand is on the joystick/yoke, th…
-
- 134 replies
- 11.9k views
-
-
all you want ZFW,TOW,MACZFW real airline real boeings real airbuses in real time!!updating every minute!! from Perth Airport Australia!!! http://perthacars.no-ip.org:8050/acars/
-
...for the one who's interested, my collection of FS2004 tweaks.Happy tweaking,MikeWin XP / Fs2004 Tweaking and TuningHard Drive PropertiesTo access: Windows Explorer>Right click on each Hard Drive icon then select PropertiesGeneralI highly recommend reformatting your drive and choosing the NTFS file system for maximum speed and security. However, you can still convert an existing FAT32 file system to an NTFS one even after installing WinXP by going to Start>Run and typing "Convert C: /FS:NTFS" (without quotes). This will take some time to complete and won't be as fast as if you'd formatted with NTFS, but still faster than FAT32 for most larger hard drives and cert…
-
Please please please can anybody help me i've just installed the patch for fs9 and the lights on all the aircraft are flashing to quickly is there any way to slow them down if not i think im gonna go mad.
-
- 4 replies
- 1.1k views
-
-
I upgraded the default 737/747 to 'ultimate_default_747.zip'some crew callouts are annoying (sounds like he says "20/20 embery") the - I cant find the file to remove- I find all other sound files that sound good tho -like pushback,dfd 1-10, altitudes..
-
Hello,For a few days I cannot update the Editvoicepack. It looks like the server does NOT respond.Any recommendations?Thanks in advance
-
- 1 reply
- 662 views
-
-
Hello all :)I want to fiddle around with the default runway & taxiway textures located in FS9Texture.The files are small bitmaps - but I cannot open *some* of them. In Windows XP's thumbnail view these stubborn .bmps appear only as big icons and when I double-click them windows says "Drawing failed".I started MS Paint and dragged one of them in there but got an error message too.I dont understand...are they some kind of "special" bitmaps that cannot be viewed in ordinary software?Can someone advice...thanks loads :)
-
- 5 replies
- 1.1k views
-
-
I was looking for a good -300/400/500. Can anyone tell me if these series of a/c have an FMC, or is it just the NG? I used to use Dreamfleet 737, but cannot in FS9. Are there other non NG's that have FMC's? ThanksBrad
-
- 10 replies
- 1.8k views
-
-
Hello everyone,i reinstalled my FS2004, this time with just a minimum or "express" install instead of the full install.The result is that i cannot find anymore my World/Texture folder under Scenery.Does anyone knows how to install the elements that in the "express" install are missing (of course without reinstall fs2004 another time)?Regards,Hi Sky.
-
Hey everybody.OK, here's the deal, FS keeps crashing, or should I say not starting. I start FS, the SplashScreen shows up and then it disappears. No messages, just *woosh* and it's gone.It worked fine yesterday, but not today for some reason. :-hmmm The only thing I changed from yesterday to today was the installation of the PFS LOWW scenery, which has been deleted of course. But, doesn't help :( And neither did the deletion of the fs9.cfg.So, anybody got any ideas except reinstalling?
-
I am trying to figure out how FS9 designates the gear on the CH Yoke by default. It has geer up on one button and gear down on another, but in the button list it don'es show the buttons assigned, and I see only a "gear up/down" setting, not the individual ones that it set as a default. I would also like to know if there is a "Control Wheel Steering" mode that I could assign. It would be nice as the Siminole I will be training in has the feature on it's autopilot.----------------------------------------------------------------John MorganReal World: KGEG, UND Aerospace Spokane Satillite, Private ASEL 141.2 hrs, 314 landings, 46 inst. apprs.Virtual: MSFS 2004"There is a feel…
-
- 7 replies
- 1.5k views
-
-
I have a slow connection so could somebody tell me what's updated in FE 1.1, before I commit to downloading the whole thing? I'd like to know if the update will worth my time. Thanks.
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=18781
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=18779
-
I was flying the Eaglesoft CX when I got a message that I had run out of memory and FS shut down. To make matters worse I was on final at 500 ft., after a long flight. I have 1gig of ram which is more than enough. The only things running where active sky and FSAutostart. When running FS I'm usually using about 720megs when I checked now I running about 1.5 gig! What could have been sucking all my memmory?BTW, there is over 40 gig available on the HD.Dave FisherCYYZP4 2.8 GB 478P 533 MHZ CPUP4P800S Asus Motherboard1.0 gig DDR RAMGeforce Ti 4200/128Maxtor 40 Gig ATA 133 HD x2WDC WD800 80 Gig HDhttp://www.precisionmanuals.com/images/forum/ng_driver.jpg
-
- 0 replies
- 789 views
-
-
Hello,I've recently been running into the problem where the throttle axis will only control one of the engines, forcing me to control the other one with the mouse. This becomes a problem when changing airspeeds and landings in particular. There is a keystroke where you can select both engines, but I dont recall what it is can anyone refresh me?ThanksPatrick
-
(The things that the arrows point to in the attatched picture)Does anyone know how to get the board walk thing (you know the thing that you walk across from the gate to the plane?) that thing. does anyone know how to get it for different airports?aswell i have seen baggage cars and poeople at airports on people screenshots, does anyone know how to get that aswell?thanks in advance (sorry for the words i didnt know) ;)brandon
-
The taxi lights on the f70 are not working...can anyone help?ThanksBrian Ratledge
-
Anyone else having problems with SimMarket's web page loading?I have been trying for weeks?Cleared my browsers history etc, restored all settings to default and no luck."The page cannot be displayed"http://simmarket.com/Thanks in advancePete :)