Dassault Falcon 50

Any working PFPX profiles for Falcon ? I have found one from Santiago de Larminat but with this profile i have error in PFPX

Initially the weather radar worked in my Flysmware aircraft with P3D v5 and the MILVIZ Advantage Weather Radar for P3D v5. When I upgraded to P3D v5.1 then the WX radar started causing hesitations where the sim paused momentarily every 15 seconds. I unnstalled WX radar for P3D v5 and waited for MILVIZ to do an update. Unfortunately with the release of P3D v5.2 and now v5.3 P3D broke the WX radar by MILVIZ and they are saying they can't fix it and haven't made any announcements that they are working to that end. I have made configuration changes to the Lear 35 so it displays dual GTN's and no wx radar is displayed but have not been able to do that with my other Flysimw…

The pictures of Falcon 50 cockpit layouts all have an older fmc could you do this as an expansion? I have not found a GTN being used in this aircraft just a Collins fmc. I am a flight simmer that likes to fly very realistically using as real world as I can get. Thank you.

Hi Al, its been a while. My Falcon stopped working so I uninstalled and reinstalled but it sais my key is invalid. I have put in a ticket but no one has gotten back to me. What do I do. Thanks.

I have chocks in, all three generators off, parking brakes on, the GPU image on the Options panel shows a green check mark in the upper left corner. However, I can not get the EXT Power switch to go into the ext power switch position. It is in normal when loaded and if I click it then moves to Low Temp Start. No amount of clicking will get it to EXT power. Any ideas on what's wrong. I've gone through the posts here and the manual which simply says EXT Power on, Parking Brake on,Gens off and the plane meets all those criteria. Thanks.

is the F50 equipped with auto throttle? Peter

Hello, When i load the Falcon 50 since i have updated WX Advantage Radar for P3D4.5, in P3D Add-ons menu why is there is 2 entry: 1) Weather radar module version info Rex Wx version 1.44.1 2) Weather radar version info Rex Wx version 1.40.45 In my P3DV4 module folder i have only one MV_WXM.dll version 1.44.1 so why i have two entry? I think the second one is the old version, how to remove this entry in my P3D Add-ons menu? Thanks for your help. Best Regards

I'm not using pedals, and it's hard to control the plane while taking off from the runaway. Is there a way to lock the nosewheel and keep the plane straight? If not, can someone recommend control settings for the Logitech Extreme 3d Pro? What is the elevator trim setting for take-off? At the default value of '0' the plane complains about the trim after take-off. Where can I get a guide or a user manual for the auto-pilot. It doesn't have to be the official user manual. A tutorial or walkthrough would be nice. I googled and a bit surprised to find out that they are selling what appears to be the official manual for the unit.

I cannot enable the digits in the transponder box. I do the steps by clicking the large black know to enable the first transponder yellow digit but it remains only in dashes when it´s in Stand By mode or in code 1200 when in TARA mode. I uninstalled and reinstalled the aricraft but it has the same problem. I use FSX 32bit. I hope I can find soem solution in this forum Regards

Hi Guys Tried to fly the plane in P3D V5.2 and after loading the sim CTD Bye, David

OK, I have un/reinstalled the Falcon 50 twice now with the same results. When I turn on my shield/flood lighting, it is an ugly green color! It is a fluorescent light, it should have a whiteish blue color to it. The gentleman that did the FSL Spotlight profile nailed it! I know Mark is meticulous about detail, so I can't believe he made this green lighting effect. Unfortunately, none of his links work anymore. Before I go and try and use FSL spotlights, am I doing something wrong? Are the shield lights really green!?? Please tell me I'm doing something wrong. I have been in Falcon 50's, the shield lighting is very similar to the Boeing I fly. …

Phew - that felt more like a 727 than a business jet! A rare flaps-0 takeoff. Cusco, Peru all the way to Easter Island, Chile. Had to run it at M.75 with island reserves.

Hi all, was wondering if anyone knows of a fix/if it is possible to stop certain sounds from muting when changing tabs. The APU especially comes to mind. I have the aircraft APU turned on, however tabbing out of P3D to check flight plans etc causes it to mute. Other sounds such as engine noise are completely fine. I have the "mute sounds in lost focus" option turned off. Thanks in advance! P.S on a side note I'm also back to painting the Falcon. Should have a few new paints uploaded in the next few weeks for you guys to enjoy 🙂 (Here's a little preview)

Just wondering how it's done by others. Thanks.

I searched the forum for results before posting this but didn't find a solution. After uninstalling, deleting the folder, and re-installing; my AI for the Falcon still has this weird behavior. It's shaking. The co-pilot's AI also shakes. Why? I have my anti-virus off and the only add-on installed in the sim are the latest versions of OpusFSI, Milviz weather radar and the RXP gauges (all inactive in this plane at the moment). Has anyone else had a similar problem and was able to resolve it? Addendum: video replaced. See video below.

Hi! Using a dozen tables of performance data for the Falcon 50 (from the freechecklists.net file linked in this forum) I've put together an MS Excel tool, which allows for quick calculation of takeoff thrust, takeoff and landing speeds and distances. Hopefully this would make performance calculations a little less tedious. It's now available from the AVSIM Library: https://library.avsim.net/esearch.php?DLID=221011 Let me know if you find any issues or have any suggestions. Enjoy! Michael

Is there a possibility of updating the FA50 so that the yoke continues to move with the autopilot? It is a bit of an immersion killer when you sit in the fantastic 3D cockpit in VR (and it really is stunning, I think it is my favourite flightdeck in VR) and the aircraft begins a turn but the yoke doesn't move. Thanks for the great aircraft! Neil

Hi, after installing the flysimware Falcon 50 in to my FSX simulator I was getting some unusual flashing graphics, but only when in one of the inside views. spot views were fine. I found out that I had to turn off “Advanced Animation” in the Graphics Display settings to stop this problem from occurring. Has anyone else had this problem? I hope that any others that may be experiencing the same difficulties can benefit from my post. Kind Regards

Don't ask when, don't ask why, just don't worry about. But seriously, i'm not gonna answer any questions about when, how long, or even IF. Mark is very busy. A show of what I have been doing in my boredom. Obviously it's the Falcon. And yes, they are ground up textures, and yes, it is entirely PBR thus far. Renders and a couple in sim shots. Again, seriously, no questions, and do NOT pester Mark about it, if it gets implemented, which i'm positive it will, it will be on his time. As always my work for Flysimware is free, but by all means, if you'd like to buy me a beer, a link in my signature will make that happen. 😉 Cheers

Finally found some performance data for the Falcon 50 with TFE 731-3's. It's hidden at the end of the checklist document at freechecklists.net (linked below and also in the sticky "reference information" post). Looks like the takeoff N1 we're aiming for is 101.5%. It also has climb thrust settings, cruise thrust/fuel flow/TAS charts, etc. Very interesting and useful stuff. I think my times-to-climb are going to get even longer with compliance with these tables, especially the 300kt/M.80 profile. (It's realistic though - I've been studying FA50s on FlightAware and they're definitely in no hurry to reach cruise. 30 minutes or more is very common when heavy. Here's an …

Hello, I'm having an issue with the Falcon 50 in P3D v5.1 HF1 where the Beacon light bleeds through the cabin and I was wondering if there was a way to solve this? I wont dare fly the aircraft at night because of this 😞

Hello everyone, I have been a proud owner of the FSW Falcon 50 for a while, but I would like to fly a specific registration. One of the few Falcon 50s that have been in my country (only 3). If I knew how to do a repaint I promiss I wouldn't bore you with this but unfortunately I have tried and it is not my ability. The plane I am referring to is the EC-HHS. Today it is still in service despite being 30 years old but under another registration in another country. If someone would be kind enough to make me repaint I would be very grateful. Merry Christmas to all of you! Diego

Hello, I recently purchased (only a few days ago) and installed the Flysimware Falcon 50 into FSX Accelerator running on my widows 7 operating system and when I view the outside world from the virtual cockpit the outside scenery only shows the top third of the available display area, the bottom two thirds of the outside scenery is black. The Outside scenery window can usually be clicked on, dragged and resized but not in this case, it seems fixed. Any thoughts on how to get the outside view showing correctly from the VC? Tou help with this problem is much appreciated. Regards

Hi guys Got version 2 today and installed to P3D V5 The only problem is I can't get the attitude indicators move.

Nothing Happens when I click the knob in the FPL button page to put in waypoints on the stock GNS 530 (left knob works to change freq, right one doesn't do anything) and I cant use the F1-GTN750 because of P3DV5 ".1" Hotfix yet. 11/20/20