Lorby-SI Payware

Hello @ll, update version 1.17 b04 of WAMA has been released to the shops today. Please give them a couple of days to deploy the deliverables. Positions can now be saved even when the aircraft is in the air/still moving Destination Finder can be limited to the installed addon airfields. Lorby "GoogleEarth Live View" has been added, that will show the pilots position and all AI in GE Best regards

Hello @ll, when updating your simulator to version 4.5 from an earlier 4.x you don't have to do anything WRT your Lorby-SI Addons. Since they are all installed and referenced externally, they continue to work even if you decide to do a full uninstall & reinstall of your simulator. It is still early days, but from what tests I was able to run (FireFighterX, CropDusterX, AiTrackerX, CameraPositionX, WAMA), there don't seem to be any issues. Best regards

Hi there Pretty sure it is not a WAMA issue after a long flight when I exit the aircraft into the POD the P3D screen goes black but P3D still works I can save the flight from the menu. Only happens on long flights, can enter and exit on short flights no problems. EDIT: It doesn't happen if I switch to avatar only when using the WAMA function to exit the aircraft. Thanks if you have any ideas. Cheers, glider.

Hi, Setup: P3d v4.4 Win10 Purchased From Just Flight, Version reports as 1.16 b03 Problem: I can't get WAMA to connect to the database. The is a screenshot of where I'm at: Screenshot of WAMA Problem I've tried starting WAMA as admin, that has no effect. I had to create WAMA_Position_DB.xml manually because it wasn't present after installation, and that fixed one error I was getting, but I still isn't right. Here is a screenshot of the WhereAreMyAircraft_P3D_V4 Files directory... https://imgur.com/wFupr3s As you can see, it creates the backups, but not much else. Help!

Hello everyone and sorry for my English, I hope it is understandable 😏I am interested in purchasing AITRACKER X. However, I would like to use only the Formation flights function for flights in the virtual aerobatic team without using other program functions. I'm not interested in watching AI planes or a custom camera system. I do the flights mainly in the cockpit and I do not watch aircraft from outside. As I wrote, I would like to fly in the formation simulating the aerobatic team.Therefore, I would like to ask if it is possible to use only one of the formation (porgram) functions without having to use the others, which are not needed for the purpose which I indicated? …

Hello @ll, Edit: This issue has been "fixed" (rather: worked around) in FireFighterX 1.86, which as been released today. it looks like P3D version 4.4 changed the sequence in which the 3D models are processed that are attached to each other. This causes the blue/red disc in the helicopter buckets to lag behind - leaving a gap between the disc and the bucket. This gap increases with the speed at which your aircraft travels. This does not happen in P3D 4.3 with the identical FFX version. I have posted this issue on the P3D forums, but since I am not a member of their beta/3rd party developer inner group, I have no hopes that this will be addressed. …

Hello, I bought AiTracker a couple days ago and I have been using it with P3D V3 since then, but I have the following problem that I can't solve: When I define a route with a set of waypoints and I set an AI to follow it, it does follow the path flying but instead of going in a smooth flight, the aircraft shakes continuously rolling clockwise and counterclockwise with a very high frequency (around 3-4 times/second) by moving its control surfaces back and forth (it happens only with some airplanes, mostly small ones, like combat airplanes). I have tried changing any parameter I've thought about in the AiTX but I haven't been able to solve it in any way. …

Hello @ll, a few product updates have been released today: FireFighter X 1.86 b01 Works around the issue where the blue/red disk objects that denote the fill level of the helicopter buckets lags behind in P3D V4.4 Fixes the bug where AI fire fighters would get stuck at non-towered airports Has an internal airport database now, so you can call in AI fire fighters from far away airports too ("Start parked" with an ICAO) CameraPositionX 1.26 b04 Adds new parameters that have been introduced in P3D V4.4 (night vision mostly) Fixes the bug where hotkeys for global assignments would not be saved Adds a backup feature where you …

Just started having this issue with the update before the 1.15 b02 update. Used to work fine for me with the version I had when I purchased in November 2018. How can I reinstall WAMA without losing my saved positions? .

I purchased and downloaded Crop Duster X, got it installed and seems to be working good on my FSX Steam Addition (really enjoying it, in fact). However, I don't believe the spray weight in FSX (gross weight) is being reduced as I spray a field. Going by the FSX Payload-And-Fuel screen, I'm still showing as fully loaded (-minus a few pounds, presumeably fuel). The on screen (CDX) message says I have sprayed then entire field (or whatever I was able to get during that flight) and 0% insecticide left, as does the external CDX program. So I don't think CDX and FSX are communicating on this part. Perhaps it has something to do with the Alabeo PA-36 I am flying? I …

Hello @ll, WAMA has been updated to version 1.15. This fixes the problem where the Aerosoft Airbus would become uncontrollable while WAMA was active. The new version has been uploaded to the shops and should be available in your account there shortly. Best regards

Hello OliverI really have a very strange problem:WAMA and the Aerosoft Airbus pro obviously do not like each other!After hours and days of research in various forums, I found out after countless attempts with activating and deactivating each of my many, many add-ons that unfortunately WAMA can not be used with the AS Airbus !?Once WAMA is connected, the Airbus gets completely out of control, is bouncing up and down and ultimately crashes ...Tried to also to delete all my stored flights, completely deleted WAMA and reinstalled.. Unfortunately, all is worthless - as soon as I connect WAMA, the Airbus gets out of control!I know, the whole thing sounds pretty strange, but may…

Hi Oliver, I have had FFX for a while but only recently started getting right into it. I am having an issue with FFX and AI aircraft dispatch. I have read in the manual that aircraft can get stuck on the ground when the flight plan to a fire is too long. However, I am able to dispatch a single aircraft (any) to the fire-ground no problems. Starting Parked, it taxis from parking, pauses at the holding point of the runway, before taxiing out and taking off. But for any aircraft dispatched after the first one, they all get stuck at the holding point to the runway. Deleting them obviously removes them but a new dispatch results in the same outc…

Hi, yesterday I bought CPX, following the manual included in the program I noticed that the chapter 3.3 Camera Control reports the keys combination in order to move the eye view. I have P3dv4.3 and except Ctrl&+ , Ctrl&- Ctrl&Enter the others keys do not match those indicated. Not a problem, with try&error I found the corrtect ones. The only movement I could not find is for Z axes Move Back. Any suggestions?

Hi all, I am really enjoying WAMA for placing static aircraft at my favorite airports! Unfortunately, I stumbled across a problem: I am using the FSUIPC AI Planes Limiter (set to 50) to reduce the amount of AI planes around me to get better performance. Unfortunately, the limiter not only removes my AI planes but also the WAMA static airplanes and my saved aircraft positions. Is there a way to "tell" FSUIPC not to remove those? Maybe flag the static aircraft placed by WAMA not ais AI planes but as scenery objects? Or by configuring FSUIPC so that it excludes the WAMA aircraft from removing? BTW: I am using the "create aircraft as objects" option. Tha…

Hi, I had downloaded 3 times from SimMarket and installed equal times; start sim ,follow directions of wait till everything is loaded and then press connect....the message " unhandled exception has occurred in your application. could no load file or assembly "System data SQlite.dll or one of its dependencies, the specified module could no be found". BitDefender has exemptions for the .exe in antivirous and firewall, all 4 Simconnect are installed , .NET 4.7.2 is installed. Destination of installation has bee changed to " G:\Lorby-SIWhereAreMyAircrafts_P3D_V4, (I used 44 installer) Meanwhile Connect button continues grey, all my planes and objects are sho…

Since even P3Dv4.4 handles AI still in a 'stone age' manner, it happens to me often that f.i. all gates for 'heavy' are filled with AI aircraft, so there is no place to park my QWB787 at my favorite gates on various airports. And... after loading P3D it happens that when I pushback, all of a sudden my place at the gate is taken by an AI aircraft. I've got just one quenstion: Can WAMA reserve various parking spots so that they are empty when I arrive after a flight and avoid that the silly remplacement of my plane by AI during pushback. If so, I'll buy it immediately. I really don't need the other functions that WAMA is advertised for, but keeping gates/parkings empt…

Hello @ll, WAMA version 1.14 has been released today. This fixes the long standing problem where parked aircraft of some developers would shut down your own engine when you came in range. It includes a separate P3D V4.4 version that fixes the issue when trying to play back recorded landings The app has been sent to the shops and is already available to all SimMarket customers. The other shops usually follow in a few days time. Best regards

Hello @ll, Fire Fighter X version 1.83 has been released today. Please allow for up to 48 hours until it is deployed to your account in the shop where you bought it (SimMarket has already confirmed the update). Uninstalling the old version is not necessary, but it doesn't hurt either. Starting with this version, FFX will no longer just drop retardant when you press the trigger! You have to arm the drop system first! To do that, just click on the green LED on the top left of the drop control dialog, or use the appropriate button on the gauges. The same is true when you want to scoop water with a skimmer aircraft or helicopter bucket. You have to arm the sc…

Hi. I’ve been having a problem with aircraft shutting down when approaching airports with WAMA positions saved. Process of elimination shows it must be WAMA. With it not running there is no issue. 100% of the time when running over the last week this has happened. Other clue is that if I’m in a default or any aircraft and then launch WAMA when at an airport with positions saved, the mixture gets pulled immediately. I have just reinstalled and gone to P3D v4.4 to stop the issue; not realising what it was. Same happened in 4.1 but more occasionally. Any suggestions gratefully recieved. Thanks

Hello Oliver, After installing p3dv4.4 I'm no more able to open the recorded files from the logbook !? The files (*.fsr) are there, and I'm able to open them inside p3d... Nevertheless I'm not able anymore to open the 'landings' within WAMA, clicking on the recorded flight in logbook !? ...clicking there, nothing happens anymore... After 'rearranging' all my existing tools, maybe I forgot something to do concerning WAMA 😉 But so far , all works fine with WAMA (including Recording my flights), but no Playback at all... Please give me little hint ! 🙂 greetings and thanks in advance ggerolamo

Hello @ll, CameraPosition X has been updated to version 1.25 b05. When you are using the CPX hotkeys to access fixed location cameras, your own aircraft will no longer be warped to that position. This only happens when you select the camera within the CPX GUI. You can opt to disable the CPX camera controls when the app is minimized A bug where some keyboard combos would override each other has been fixed. Cameras that no longer exist are not removed automatically from the assigned hotkeys. The app has been deployed on SimMarket already, the other shops will provide the update once their deployment process is complete. Best regards

I am considering purchasing your Camera Position X. I'd like to explain what I need,and base my decision on whether this product will do what I hope. I am running P3dv4.3 on Win. 7 Home. I purchased the HS748 airliner from JF with VC only. The A/P is located between the pilot/co-pilot seat,forcing me to take several steps to change my view from forward to down. A slow and cumbersome process which I'd like to avoid. Can I take a picture of the A/P,and move it up into my view forward, and also OPERATE the A/P functions (buttons) while it's in this view. Thanks for your time and I hope to be a customer... Skip d

Hello @ll, Two minor updates haven been released yesterday CameraPosition X 1.24 b02 - This fixes an issue with a global camera definition "CIGI view" that seems to be installed by a recent addon. FireFighter X 1.85 b03 - Has a work-around for blocked simulator events that make it impossible to arm the drop or scoop systems on the default C130 and the Nemeth CH-47 - It also adds a new type of retardant bucket, the "Smokey", which is used in Italy attached to a Chinook. Best regards

Hello Oliver, using WAMA all the the time, I wonder if there are keyboard shortcuts for some actions? Is there for example a shortcut to 'activate time machine' ? - that would be very helpful 🙂 thanks in advance ggerolamo