DX-10 Discussions, Hints and Help

Hi Guys, Is the Mad Dog dx10 compatible? I was reading that during the day it's fine but at night that some instruments turn fully into white blobs. I'd love to get this aircraft since I've been hearing great things but it's a real damper is she cant be flown at night in dx10. Any ideas? Thanks Alex M.

I just bought it at flightsimstore.com . I know some guys were looking for it over the weekend...the wait is over :smile:

I've tried DX10 but one thing I've noticed is how bad the AA is even with steve's scenery fixer set at 32x it doesn't compare to DX9 and nvida inspector. Is there a way to force my NI settings into DX10?

I found a guy with the exact same scenario on Steve's site: I found a similar case with out solution found on Steve's website: Please any advice on what could be wrong? I cannot get past the splash screen. FSX process just quits, no warnings no nothing... Hello Steve, I’ve installed your files, after I opened the fsx I enabled the option Dx10 Preview in FSX and I had to restart the fsx, but since then I can’t open again the fsx. I had a lot of payware installed, like fs global, rex, gex, utx, aerosoft scenaries… Please, could you tell me how I can restore to the previuos configuration? Thank you a lot! POSTED BY FRANRAMONCRUZ | APRIL 16, 2013, 8:49 A…

Friends - Managed to reduce stutters in straight flight after take off but have micro stutters while banking and on the ground especially when turning... - Managing 30 fps mostly except at add on airports where it can come down to 21 fps. But this does not matter provided I can get it to be smooth. i7 2600K oc'd to 4.4Ghz GeForce GTX 670 Request you to take a look at my cfg file. [Graphics] D3D10=1 //DX10 MultiSamplesPerPixel=4 MultiSampleQuality=0 SHADER_CACHE_PRIMED_10=1693458432 TEXTURE_MAX_LOAD=2048 NUM_LIGHTS=7 AIRCRAFT_SHADOWS=0 AIRCRAFT_REFLECTIONS=1 COCKPIT_HIGH_LOD=1 LANDING_LIGHTS=0 AC_SELF_SHADOW=0 EFFECTS_QUALITY=1 GROUND_SHADOWS=0 TE…

I installed the fix for the sake of putting an end to oom's, but am encountering the following: 1- Cycling views results in black areas for a few seconds, and this also includes aircraft. 2-Aircraft skeleton shows up when I cycle through views, and corrects a few seconds later. 3-OMDB-KJFK ends in out of memory as I approach gate after arrival-T7 (Have Manhattan and freeware Laguardia, and FSDT KJFK). 4-Lower FPS at LFPG than before the fixer instal-T7, (12-25 as opposed to 22-30). All this means I am doing something wrong somewhere, or forgot a setting, and would appreciate a nod in the right direction. My Specs: I2700K @ 4.8 Nvidia Gforce GTX 680 16gb …

Hi , I have installed Steve's shaded fixer from avsim 3.2.2. I find the AI aircraft are still grey... what did I miss, I followed instructions in the read me file. Is the paid version any better ?, should I be buying that ?.

When FSX first came out, I spent alot of time discovering all the abilities of the new sim. My wife got grumpy as I was ignoring her a bit and Playing with FSX more than her, so i found myself in the dog house. As FSX got older and less exciting, I got out of the doghouse and all was well for several years until the DX10 Fixer came out. Thanks to Steve and you too Paul, Fsx is brand new and 10 times better than before! I'm addicted again and can't stop checking out the world in DX10. The wife is getting grumpy again and back into the dog house I go again! This time I think its worth it , You might want to put a disclaimer on your product :lol: ! But seriously...a heartfel…

Hi I like to go back to the default fsx water animation and textures, I hope this will fix my water. But the backup that rex made was already with custom textures not default ones. I nowhere cant seem to find the default ones. I only found in FSX sp2 the Oceanfield ......1 till 5 .dds. I think I also need these ones because since then microsoft worked on dx10. But I need also the 303b2su1.bmp files. For the colour I guess. Can someone help me out what i can do best now? I do own the orginial Microsoft FSX Deluxe which is on disk but i dont have a cdrom drive anymore. Many thanks!

Hi All, I've finally decided to switch back to nVidia after a couple of years of using ATI (and having many problems with it!) So decided to go back to trying DX10 - first impressions on the new card are "WOW" its about 10x better and I'm not seeing any delay loading textures, not a single stutter and even when using the NGX i get a steady (locked) 25FPS - I couldn't be happier apart from one thing.... The AA - whilst much better than my attempts when using my old card, still isn't as sharp as it should be. I'm getting some shimmers and jaggies in the cockpit. I've tried a few settings in the nVidia inspector, but I must say whatever I do in there it doesn't s…

Hello All - I seem to have a lot of tree shimmer around the free Orbx CBB7 in DX10. It only appears to the the light green trees around the camp and runway. Unless I crank up to the anti-alias in the fixer to MultiSamplesPerPixel=8 and MultiSampleQuality=24 does it seem to minimize the shimmer. Does anyone else have this issue? Thanks!

Hi, I purchased the DX10 fixer. I must say, WOW! Now fsx is literally flying! I just have one question, what AI package should I use? What is most compatible with the DX10 mode? Cheers Ian

hey guys, I ask your attention please to help me solve a problem. i reinstall my FSX, and i defined my AA setting via the control panel of my graphic card (ADM). but when i turned on the DX10, he ran all the AA settings, and i can't change them if the DX10 is on. if I turn off the DX10 and I load flight, I got a black screens only at the day, but at night I can fly without problems. help?

Hi All Is there a "correct" way of uninstalling FSX? After numerous problems I've decided to bite the bullet and do a complete re-install. There seems plenty of advice on installing but I couldn't find anything on uninstalling. Any advice, as always, gratefully received ^_^ Many Thanks Alan

I know a lot of people use this tweak via NVI, which also means limiting your frames to 30 using an external limiter of some sort. Well, I tried several times to use this 'tweak', but ultimately, all I got was lower fps and degraded experience. During my mess around with this tweak, I set my limiter to unlimited. I then, couldn't figure out why I'm having weird stutters and low fps when going full screen. Ofc, that's because vsync regularly only works in full screen mode. So half refresh-rate without a limiter is actually disturbing fsx. Everyone who often wonder why they have fps issues and do not use a limiter, make sure vsync settings is set to default in NVI fsx …

Could somebody flick me a link to downl;oad a stock ShadersHLSL folder please. I have some really wierd water stuff going on in DX10 as in shows water streaming out of the embankments into the ocean around Sydney Harbour, I will try to post a shot. Cheers Rod.

Wondering if on setup wrong for dx10? I'm using the dx10 fixer and when I load pmdg aircraft the vc looks blurry, like I'm looking at it through foggy glasses. When I zoom on it clears up but compared to dx9 it is really bad. I wonder if anyone can give me advice? Thank you Anthony

Can someone please upload these files or email them me? I seem to of not backed up my default when installing REX.

Two things: 1. if you use REX and wonder if your water animation is working or not, first make sure you enabled the DX10 option for it, but also make sure the animation is actually compatible with DX10: I've read a few times that not every animation works well (or at all) with DX10. So in doubt, select another one and see what happens. 2. I reverted back to default FSX water... and I wonder who else did this. Because a lot of people use REX because the water sucked (with DX9) they don't think about or consider giving the default FSX DX10 water a try! I had some problems with wave animations (no animation at all, even with DX10 enabled in REX) and when I reverted t…

Well i have had it for a short period of time my new HD7970 3GB Saphire Ghz edition and it seems to response to FSX in a different way than my old HD5870 1GB as i am having these artifacts with real bad scramble .I have no experience with these even if i pushed the old card over the edge it would only drop in frames. This new card seems to give up before that even if the temp is below 60c. First i was suspecting the overclock of the CPU but it dont think it is as it sit between 60-75c at all time (I7-4770K-4700) My test scenario for the day is Extremely Dense Autogen . LOD 6.5 HD2048. FTX Scotland sitting on rwy 12 with ORBX Lancair in Edingburgh and just after a …

I did everything by the read me. Nvidia Inspectors as well as FSX.CFG but the AA does not seem to work. Any help is appreciated. Konstantin

Need a vector please. Thanks! Rich Perry

I remove my files for ENB, but still FSX will not start when attempting to start up in DX10. What files could I be overlooking(besides the ones in the main FSX folder)

Is there a fix the grey textures on aircraft (including AI) that we have when using DX10? Thank you.

Great News, guys! DJJose just sent me this news! http://flytampa.org/forum/viewtopic.php?f=24&t=6364&p=41994#p41994