PMDG 737 NG (Legacy Version)

My textures are weird, specifically the numbers on the autopilot panel. Are there any fixes?

Hi I`ve been flying the PMDG 737 600 for a while now and thought i`d give the 800/900 Ng`s a try.Downloaded them a few days ago but i`ve found i`m stalling and falling out of the sky soon after take off. Even though i`m sure i`ve programmed the FMC correctly. My speed tape shows red boxes throughout the speed scale and for some strange reason the SPD/REST shows zero in my FMC on my initial climb. I`ve googled this problem and found others to have had the same trouble with the 800/900 but i couldn`t find a solution.i`m taking off with a flap 5 setting and I`m sure i have all my FMC and MCP settings correct. Any help ???????????????

PMDG 737 800/900....not an issue until recently. All other views 40-50+fps, 2d panel drops to 4-6 fps, slideshow.

I had to reinstall my legacy boxed Version of the pmdg B 747 for my FSX. Now I ´d like to reinstall my downloaded Expansion pack of the Version 747-400 8. After starting the Installation I always get an erropr message saying: Unable to validate your license. Please contact PMDG Technical Support. Im not able to contact. I´ve forgotten the Password. A new Password doesn´t work. So I have no Chance to finish the Installation. It´s very complicated to enter to pmdg Support. I can´t. Please help me. Tahnk you very much. regards

Can't seem to find the cold and dark start up tutorial in the documentation for the NGX

my hud wont work idk why it dont show anything

hi i am unable to get into "mod rte legs" page in fmc i am running pmdg 737ng addon on ms fs2004 software

From the fs2004 pmdg ng 737 package, can you open the doors from the fmc or something? or is that something that's only allowed on the ngx??

Hi all, I've installed 737-600/700/800/900 with model update. I have a panel state issue upon initial load into FS9 with all liveries. Everything works fine except for the logo light not working. i.e. The tail logo doesn't light up. However, if I load the default 737-700 cold and dark flight from select a flight, go through the checklists to power up using either APU or Ground Power; this then fixes the issue of the logo light not working, including on all liveries (i.e. without exiting FS9, creating a new flight). Is there a way for me to save the panel state for the 737? Thank you in advance for any help on this. EDIT: Resolved (solution below) …

Hello, I have the aircraft Boeing 737 NG installed with FS 2004. The FMC-Database works with AIRAC CIRCLE "0411". In this database the airport "EDDL" with SID/STARS does not exist. I'd like to operate the aircraftcraft with the book "PMDG-YOU HAVE CONTROL" of Tim Rommen. This tutorial is based on AIRAC CIRCLE "0711". 1. How can I get the data of EDDL into the database of FMC? 2. Wherefrom can I maybe receive AIRACCircle "0711", which works with the book mentioned above? Peter

I am attempting to install the 800/900 variant of the 737 NG under WIndows 7 Pro. My FS9 directory is located at D:\Games\FS9. I have insalled the plane in times gone by successfully. I run the setup.exe as Admin, but each time I attempt the install it hangs at a specific point. Current File Skipping File C:\WIndows\Fonts\Lucon.ttf It hangs here and that's it. Thanks for the help... Eric Martin

Hi, I fly with the 737-800 on FS9 (old version) and the problem is when i try to make an ILS-approach, the plane stays on the right hand side of the runway and the localiser-dot stays on the left hand side instead in the middle when the autopilot is still not disengaged. What can i do to resolf this problem and really land the airplane? Here you can see an impression of the problem:

Hey, I love flying the Boeing 737-800. But everytime I try to take off I switch on the auto arm to hold speed 250kt after take off the auto arm won't activate and there was always a little warning sign coming off on the main panel indicating the auto arm won't engage. I don't know why. I would like to do a flight on this really fascinating thing if someone would be able to help me I'd appreciate it thanks guys !

Hey! I'm new here for PMDG. A few days ago I have installed the PMDG B737-600NG in my FS9 system, and I added the Brussels Airlines version as well. I have seen, I know, many postings exist already here about opening doors, and also about extending and retracting the airstair. I've think especially with the stairs it does not Always work wel.... The doors, that is no problem in my FS9 system. They work well with Sift + E ( and number 2 also ) But, I've changed the assignements for the stairs to Ctrl + F10 to extend, and Ctrl + F9 for retracting. None works!... Is there somewhere a clear explanation for how to make the stairs work? With sureness? Greetz Jive1 - Bel…

Hello all, I do not really know whether or not I am in the right place here. I do not own any PMDG products at all. I further do not know if the request to follow is even legal but.... I am very much aware that PMDG no longer sells or distributes the 737 for FS2004 but I was wondering if it I am able to buy a copy from someone who is no longer using it. I would also like to "inherit" the reinstallation/download rights as I live in Indonesia and constant power cuts have an incredible impact on my Win 7 OS and all my flight sim programmes (I have to do full reinstalls at least 3 times a year and sometimes on a monthly basis (during the wet season)) Again, I h…

Hello, I've recently uninstalled pmdg 737 for fs9 as flight deck wasn't showing correctly. When I've come to re download it, an error message pops up saying fs needs to be updated to 9.1. When I look, I have already updated it so not sure why it won't download! Any ideas? Many thanks!!

Hi Guys, Stuck at Cairo this afternoon and absolutely swelteringly hot. One of those times when One wishes One could pull the trigger switch and slide back the cockpit window and feel the breeze. Any particular reason you didn't model it?

I have the PMDG Legacy FS9 version of the B737-600 and -700 as well as the expansion -800 and -900. Bought them back in 2009 I believe. The -600 and -700 use the -700 panels (-600 aliases to either -700 2D or -700 VC panel) and the -800 and -900 use the -800 panels, likewise aliased in the -900 to the -800 2D or VC panel. When using the -700 panel.vc there is a Baltimore Approach plate that displays in the VC cockpit of either the -600 or the -700. There is a bitmap in each texture folder that includes instructions on how to change the approach plate by creating a new bitmap image. Although there is also an approach plate bitmap (with instructions on how to chan…

1.I have the FMC (route wise) down pat with the 737NG but as to follow route i find it really hard. there is a panel gauge that shows youre route but i find if lets say KLAX-CYVR, i enter it (as if to cheat it) KLAX-LAX1-YVR-CYVR and just after i leave KLAX the direction on the GPS Screen doesn't show my route or i cannot see the line...does the issue not come from maybe the improper FMC route? 2.opening doors with FMC- is it possible? or is it only for the NGX one

Hi. Can anyone say why, when I load a PMDG 737 a/c, most of my FS9 keyboard commands don't work? 'P' no longer pauses or unpauses the sim, 'S' no longer scrolls through the views and so on - the sim is to all intents and purposes locked up. If I load a different plane, FS9 or 3rd. party (eg. a PSS Airbus), the keyboard works as normal. Try the 737 again, and the problem returns. Help appreciated. Thanks, Martin

I'm sure this has been asked/answered (probably repeatedly) but I've searched and can't find whether or not FSUIPC is necessary for the PMDG 737 to operate properly. thanks in advance....... ron forneris

Hi, Does anyone know if the FS9 PMDG 737NGs install OK in Windows 10,via the CD-ROMs? Thanks for any input on this over the next month or two, as many people (presumably) migrate to Win10. Martin

Hello I'have a problem with loading the airac database in fs2004 (PMDG 737 ng) When I start fs9 and select the pmdg 737 aircraft, loading the airac database takes a long time! I hope there is an solution for this problem. I'have installed the pmdg again. Regards, Edwin

Hi, I have been merging the PMDG panel into my other 3rd. party 737NGs and so far everything works fine. However, I tend to get the green "CG not within tolerance.. Aircraft unflyable" notice" on the screen when I start the take-off roll with some aircraft. The CG shows fine in the Fuel & payload window and in practice the a/c taxis, takes off and flies just fine - no handling problems at all. So, how do I turn off this warning? I don't see anything in PMDG options. I can right-click the 'banner' and choose 'close this window', but I'd prefer not to see it at all, at least for the time being. Is this possible somehow? I don't use FsP by the way... …

Hi... I suddenly have a problem with the panel night lighting - the panel bitmap itself doesn't change (from the daytime grey) with the rest of the panel. A picture paints a thousand words: http://img.photobucket.com/albums/v68/martinlest/Night%20Lights.jpg Anyone any idea what has happened and how to correct it? I don't recall changing the panel.cfg file (737-700 & 737-700W). Thanks.