The TileProxy Project Forum

hi all can some1 help me some 1 has to know i am not geting what i expected out of tile proxy in that the resaluton is low my ini flile is below with screen shots # # Start a line with # to comment it out. # Turn your text editor's Word Wrapping OFF for editing this document. # # Read the manual for help with configuration. Do not contact the # author about the configuration for particular services. Thank you. # [TileProxy] # Enable or disable worldwide photographic scenery coverage (Yes/True/On to enable) master_enable=On # Write a logfile to disk. In recommend to only turn this on for debugging purposes. # When using FSX RTM or FS 2…

is this bad or good any1 know preloaded 63604 hit 124570 miss 731 messages 1297 and the hits are still riseing if its bad could someone be able to tell me how to fix this problem thanks

ok so i have got it to work but there are a few issues 1 when it starts downloading tiles i get a lot of miss and message's more that preloaded 2 every now and then it courses fsx to crash 3 i uninsulated to but not sure what setting to put in when am reinstalling below are my pc specs windows 8 asus x55c series hdmi 750GB intel core i5-3337u , 1.8Ghz memory 6GB internet download speed is 4.35mb upload speed is 0.31mbps helllllllp meny thanks

hi all so i want to give tileproxy a go but i have an isue with it when i nstall it in the middle of the install i get a messeg pop up syaing a digital signed dirver is requred - windows ® codename longhorn ddk provider i press OK and it continues with the install i have tured off all user controls and antivis i then when to start tile proxy the black bios comes up it says press any key to continue and it just closes down.

hi all so i got tileproxy to work woop wooop but when am flying the scenery looks distorted and flat it dosent look like the maps on yahoo or live can any 1 help me with this how do i set it so it uses the likes of yahoo or live at the mo you caint even tell there is a house there or a bulding plz help thanks nat

i have lost all hope when i run tileproxy i get get this message and cant get any to the next bit some 1 has to know how to do it help help help plzzzzz c:\program Files <x86>\microsoft games\microsoft flight simulator x\tileproxy> pr oxyuser.exe proxyUser :volume listings failed with error: 0x80070005 proxyuser makeing sure SuperFetch is not running... proxyuser: connecting to the filter proxyuser: ERROR connecting to filter port:0x80070002 press any key to continue thats when it cuts out any help would be helpfull

Hi all I modified the libnettile.dll. so now it was compactable with the google maps. I'm not sure if it is against any laws? if so let me know or just delete the post. You can download the two fix files: http:/pan.baidu.com/s/1mguPENe Useage: Replace the libnettile.dll in your TP directory(Bakeup if needed). Config the ProxyUser.ini . See the download file "ProxyUser.ini" , I add a new server named "Google Service" and make it the Active one.

After I click on start tileproxy the DOS window pops up and I see several lines which state errors. "Volume Listing failed error #0x80070005" and "ERROR connectiing to filter port #0x80070002 Any ideas on how to correct this ??

Greetings, I've used Tileproxy in all three major sims (FS9, FSX, and P3D) trying to find that ultimate setup. The best experience by far to me was FS9 because we didn't have the fiber_frame issue that shows up in FSX/P3D. I was able to tune FSX pretty good at one point, but the decreasing frame rates near the airports really broke it down for me. P3D I found was just a little bit worse than FSX. I 'wish' we could all just run unlimited frames like we did in FS9! Then I started thinking... why not go back to FS9? So I found the old CDs and reinstalled it to give it a try. It was sooooooo smooth... but then it quickly came back to me... the dreaded occasional black…

Don't know if it's just me but my Yahoo Maps doesn't seem to work. I recently reinstalled so I probably screwed something up. Here is my Yahoo Maps entry in the TileProxy proxyuser.ini Thanks in advance for your help Looking at my proxy logs when going to maps.yahoo.com, I have hits to 4.maps.nlp.nokia.com/maptile/2.1/maptile/d38d9a851f/hybrid.day/18/77294/93813/256/png8? When trying to access the nokia link in my browser I have the following message

I have been using TileProxy for a long time now and love it. But suddenly it does not load correctly. When I start proxy and then FSX, something other than the default FSX scenery loads, which is, of course good. But what is loading now is all messed up. It is like squares of scenery are loaded that do not go together, I have water appearing on my runway. And there is supposed to be a large river flowing beside the runway that I fly out of. It is not longer there; just green grass. I could go on about what is wrong, but just leave it at everything is screwed up. I do not remember changing anything in settings. It seems that it maybe has to do with the order of loa…

I use widefs and simconnect as well as FSinn to run various flightsim addons from other PC's. Has anybody played with Tileproxy and any flavor of conduits on a seperate PC.I figured I'd ask as I have googled and not found anything and don't like going down dead end roads. Not that you don't find a lot of interestng and eye opening idea's but right now I don't have the excess time to devote and then find out it's not curretly possible.Thanks in advanceHank Adam

Hi folks, after an upgrade I can now use TP with FSX. I am currently using the .6 LOD and it looks good here in Fife Scotland. However, I am still getting rectangles of blue colour in the sea. I also get them in FS9. I am assuming that they are scenery tiles and they are devoid of the water detail. They flit about and appear in random places right up to the coastline. I get good coastline detail as I fly along in the cessna and then I get an odd tile which appears a basic blue colour with other blue tiles out to sea. I have not included the ini file as yet. I am hoping that someone has dealt with this or similar before. Any hints or tips/ideas would be appreciated…

Just posting this in case down the road someone finds a way around this.. Thus far, at least with Windows 8 x64 Pro RTM.. i've yet to be able to get the tileproxy.sys driver to register. I've done the reboot with disable driver enforcement and also tried the win 7 overrider (which doesnt work in windows 8).. I've also tried using bcedit to manually enable test mode then run the tileproxy setup with the driver install portion checked. In any case it just doesnt work in Windows 8.. at least in my testing so far. If anyone finds a way around this issue, please share.. many thanks.

Hi all,I have been using tileproxy for many years now with Yahoo and other maps as the source but have recently (last 6 months) found a mapping site for Australia www.nearmap.com and the tiles are incredibly detailed and the company is happy for us to use them... BUT... as of a couple of weeks it stopped working... I think it was me but can't see what I have done wrong.I have spoken with the people from nearmap.com and they have not changed nothing on their end so I gather it’s my configuration.They are trying to assist but without having FSX and tileproxy installed on their end its going to be a big ask for them to come up with the answers.They support the google map com…

Installed computer with windows 7. installed FSX and tileproxy and i get this error : tileproxy.sys: PreCreate: Unsolicited access to '\Users\Me\TilesProxyTemp\TileProxy Photoreal world\0702\TEXTURE\013120120130010SP.BMP' by '\Device\HarddiskVolume2\Windows\System32\SearchProtocolHost.exe'! tileproxy work.. but this error appear many times in TP window and it slows it. Thanks.

Do anybody know if it is possible in any way to add city night lights in tileproxy. There are moving cars with night lights and you can supply trees and buildings and objects (Markus Freut openvfr)!!! But how aboutt night lights ??? regards Hans Bonde

Hi gents, im here because I have a problem with Yahoo service, seems Yahoo not working anymore on my rig, instead VE work well, but I want Yahoo back because I want to try a place where VE has poor res. I have antivirus and firewall off, but if I try this from http://aviation.allanville.com/tileproxy/ [service Example 3] cache_folder=C:Program Files (x86)Microsoft Games\TileProxyServicesCache\cache.service3 network_module=libnettile module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.…

Thank you for this wonderful program. It took me ages to get it to work but once its does.... Beautifull. A few questions: 1. Are there any updates in the foreseeable future? For example a 64 bit dll would be nice. Also a configuration tool to simply adjust map levels. 2. Is it possible to use the cache? What I mean is that if I take off from Munich for example and fly to Amsterdam, the whole trip gets updated. But when I place my aircraft back to munich the program reloads the tiles again. Why not use the already loaded tiles? 3. How can I make a donation? So that you can buy a beer and some bratwurst . Last but not least I have a problem in FS9 (who doesn'…

Hi everybody. 1. For some time ago I succeded with your help getting tileproxy running on Prepar3D version 2..0. professionel. It runs splendid. Today I have downloaded the patch file to update Prepar3D version 2.1. - When I enable Estonia Migration Tool it tell that no suitable fsx patch is avaibel. I continue to enable - avtivate tileproxy and run P3D i legacy mode with earlier legacy mode. Does this matter at all -??? or do I have to install a total new downloaded version of Prepar3D v. 2.1 ??? 2. Is it true that you cannot see any wavebrush at the beaches in P3D ?? best regards and please answer to my mailadress below. [email protected]

Does anyone know if TP will work with P3D? Sent from my Galaxy Nexus using Tapatalk 2

I can't seem to get proxyuser.exe to run with a preassigned affinity setting under Win7. I can manually set it via the task manager, but batch calls don't seem to work. start "TileProxy" /AFFINITY 0X04 /REALTIME "C:\...\TILEPROXY\PROXYUSER.EXE" That's a sample of my call. Of course the '...' is replaced with the full path name. It still comes up using any core and with a priority of "Above Normal".

I have got tileproxy to work with FSX, and have used EdTruthan's filled in 'proxyuser' file with it. Haven't changed any text at all in that file, and if I fly in the continental USA (Y'know, the main country of America, USA, with most of the states) everything is nice and dandy, and wonderfully clear, (One metre resolution) but then if I fly in any country outside the USA.....Canada, Yemen, Oman, New Zealand, UK, Germany......the pixels jump in size to about 10 to 15 metres square, instead of the good resolution of one metre. Its all blurred really, and not pleasant to fly over. Anyone any ideas as to what I'm doing wrong? This is my first post here.

After a long absence I am booting up FSX again but am currently having trouble getting TileProxy working with it. In an attempt to make it work I uninstalled and re-downloaded/installed TP and edruthan's ini file. Set it up to use service 1, changed the map version and the program seems to be working ok. However FSX is not using the downloaded (and it is definitely downloading into the designated folder) tiles and is just using the default scenery. It appears to me as though TileProxy itself is working but the interface with FSX isn't, any ideas on what I have/havn't done? # # Start a line with # to comment it out. # Turn your text editor's Word Wrapping OFF for…