Terminal Procedures Forum

Hi,Any chance that we might see procedures for Eaglesoft's new Citation 2.0 Extreme with a fully functioning FMS (released on September 25)? I prefer your procedures because the ones from Navigraph tend to have a distinctly European flavor (i.e., one procedure per runway, instead of a single procedure with multiple runway options, etc.). I usually update the AIRAC and worldwide procedures with Navigraph data, then run your procedures to overlay the ones you've done, which often work better for the U.S.

Do any of the AIRAC's here apply to the FeelThere Legacy 600 business jet? Thanks for your help.Jim D.

During the Planepath SIDS/STARS installation process the setup requires a folder in which it should be installed. Vista 64 bit and FSX, where do I install the files?Thanks!

Hi Terry.There is a 404 error on your original post in this series. I think you should correct it.Bat

Hey TerryI am trying to add the airport for which I am working on approaches. When I load the airport in the game it says AFC3 ERR: 17L rnw unknown. I was hoping you could helpThis comes from the wpNAVAPT.txt file AREA A AFC317R12000167 37.998790-116.05038755.0000000000AREA A AFC335L12000345 37.965877-116.05382716.6666666667AREA A AFC317L10000167 37.998773-116.04793068.3333333333AREA A AFC335R10000345 37.971350-116.04792430.0000000000AREA A AFC324 20000235 37.982943-115.98294256.6666666667AREA A AFC306 20000055 37.964189-116.04687183.3333333333AREA A AFC326 15200255 37.982842-115.99026573.3333333333AREA A AFC308 15200075 37.982841-116.042…

Hi Terry,Thank you for the great PMDG tutorial. I am working with the FSX PMDG 744X on some approaches. I have a STAR which goes to the IAF but a procedure turn is needed because the course change is over 100

Terry,Recently flew TJSJ-KSDF with a VXV.DARBY4 STAR. When programing the PMDG FMC the only transititions avaliable for the DARBY4 STAR were HCH, LOZ, Unckl and Yocky (?). The current chart for DARBY4 shows the following transititions: HCH, LOZ, Unckl and VXV. Not sure where Yocky is???Paul KuhnKPHX

To Everyone:Well, there's already a topic on this over in the unofficial iFly support forum, but as I've done the majority of the posting in it and there isn't much activity at all over there, I thought I'd post this here as well. Basically, after updating my terminal procedures to the 0908 cycle from Terry's website, my entire FS began to freeze whenever I clicked the DEP/ARR button in the iFly 747. To exit the sim required the use of the CTRL-ALT-DELETE method. After some serious seaching, I found an installer for the 0809 cycle on my hard drive, and reinstalled these procedures. It worked fine with these older procedures for a few weeks, and I figured it might just hav…

Hi guys,At Nice airport (LFMN), landing on runway 04L is Visual 04L, VOR 04L or ILS 04L. When the weather is clear, the commercial planes coming from AMFOU and LUC STARs usually follow the visual approach. However, Jeppesen and French ATC charts do not explain how to perform this approach from the STARs. Only VOR and ILS are fully described. What the pilots do is a kind of mix between ILS and VOR approaches: they start as if they where making an ILS landing, and when the plane flies over the small island of Saint-Honorat, they turn right to the East to avoid Cap d'Antibes. From here they intercept CGS radial 176 (see picture enclosed). Does anyone know if this procedure i…

HelloI have noticed that there are no runways or approches for EGNJ in the PMDG FMC. I am using the latest AIRAC 910. I have looked at the PMDG SIDs STARs and EGNJ is there showing the runways and a couple of approaches. Why is the FCM not picking these up?RgdsSteve H

Hey guys, I am working on making terminal procedures for New Zealand airports in the level D 767. I have made a few by entering the lat/lon of the waypoints into the fmc because the fmc does not have those waypoints in the database. But the problem is the waypoints aren't being placed very accurately because the distances and headings between the waypoint I made and another waypoint is different from the charts I got the information from. I thought it would just be easier to add the waypoints to the wpNavFIX.txt file so I could just enter the name and the fmc would know the waypoint rather than me having to add the lat/lon for it. The problem is when i added a waypoint in…

I am trying to download the airac to my wilco aircrafts, on the info it says that it will install in the right folder automatically but it doesnt so i dont know the right path were to install thanks.I have FSX acceleration and vista 64 bit.RegardsPatrick

Hi Terry - I found this site while viewing an A320 tutorial which included flight planning and the fellow went about explaining how to use it:http://www.nats-uk.ead-it.com/It contains routes and aerodrome info and I found it quite interesting. I was wondering if you knew of any other official sites where I can find routes for other jurisdictions. Luckily for flights that originate and terminate in North America I have found that flightaware.com is an excellent resource.Thanks in advance and keep up the good work.Regards,Robert

The SIDs and STARs for KPHX and KSFO are all missing in cycle 0908, and they were missing from 0907, too. Some other airports I checked had procedures, so not all airports are affected. I don't know how many other airports are missing SIDs and STARs. What went wrong? The fixes are in the files, so are the approaches, but the SIDs and STARs are empty.

Hi all!Exploring Indonesian skies recently, but hardly no charts (SID/STAR, AD, AIP) are available! Navigraph only offers four airports and I had no luck finding anything on the web. Someone knows where to find those charts?Thnx!David Bernard

I use FSX (sp2).

I have installed 0904 and now 0905 in the FS9/PMDG/SIDSTARS folder but my FMC on startup still shows the AIRAC cycle as 0802.Also- a few airports (KSEA and KORD I have found so far) are not displaying any SIDS/STARS/runways in the DEP/ARR menu.Any guidance to rectify these glitches would be appreciated.

Hello fellow simmers!I have just written my first procedure file for PMDG aircraft. I chose OPKC (Karachi, Pakistan) because I couldn't find any complete ones. If you do any flying in and out of Karachi do give it a try and let me know what you think.I'll upload it on the library once it's back.Also, Terry, thank you for your excellent tutorial! :( Happy landingsEDIT: I couldn't upload the txt file here correctly so if you're interested drop me a PM!

Hello everyone,I live in NYC and on my way home from work I take the Belt Parkway (which is located close to runway 13 JFK airport) I notice on certain days airplanes make their final approach on the runway and fly right above my head and was wondering how to recreate that same approach on FSX. My other question is why would aircrafts fly so close to the ground to only turn towards the runway at the last minute, and not make a different approach a less stressful one.Ang

does that mean ATC is directing you?

Is there a data base for Wilco's ERJ170/190, I tried to download the data for Wilco and now is seems I have some double DP's in the FMS. Additionally I downloaded the latest PMDG and none of the DP's for KCLT were there, is this paoblem with the new runway????

I'm an old pilot but useless with computers. Would somebody be kind enough to walk me through the process of getting the latest SID/STAR cycle and getting it into the FMC of PMDG MD11? I know it's a pain but I really need the help.Thanks,Eric

i'm looking for the new SIDS STARS for KIAH since FAA revapmed the airways a few months ago and that i can import into FSNavigator

First of all, my hat's off to Terry and his amazing work in creating Terminal Procedure packages for every add on that is out in the market. Still, last night I was flying from Miami Intl (KMIA) to Houston Intercontinental (KIAH) and as I was programming the FMS i noticed that out of all the STAR procedures to Houston's Intercontinental the one that I needed which was the WOLDE1 arrival was missing. If anybody can help I'll appreciate it. take it easy guys!

Hello:I just started flying my PSS A320 after a long layoff and decided to program a route form KCLT to KBWI. I went to Terry