Terminal Procedures Forum

I am looking to recreate flight plan with airways and terminal procedure as it was in 1960, I read that Jeppesen start to sell airway manual in that year, so maybe is more easy to find out. I really curious to see the difference with today progress.If anyone have info let me know.Thank'sFabrizio

Hey all, Just wondering - can anyone suggest any way to record a flight path and overlay it over charts/plates? Also, it would be good if you can also view this in real time. I've seen a bit about AivlaSoft's EFB, but it may be a bit of overkill as I just fly GA. It's also a bit on the expensive side, and requires a subscription to keep current with charts. Any suggestions appreciated. Thanks,Andrew

Hello all,Where can I find terminal procedures and sid/stars for: (There are only very few in Navigraph).Central American countriesColombia,EquadorThanks,Christos

Hi,Is it possible to view free online current ENROUTE HIGH IFR CHARTS? You used to be able to view via www.myairplane.com but that seems to have finished?Regards,Berne

I use Navigraph to upgrade the database used for the FMC of the different aircraft addon I have installed. But I have a question: How could I upgrade the MSFS with the new changes in VOR, NDB, frequencies, and new rwy?Thanks in advance,Francisco Mateos

Hello,I've been using xes 1.3 beta to create and edit the terminal procedures for feelthere database for like 2 years, but now i'm having a problem that i really don't know how to solve. Everytime i want to import the procedures that i've created i've got this error:INT ERR:[Microsoft] [ODBC Microsoft Access Driver] Number of qury values and destination fields are not the same.this is happening to me with 1006 airac. i don't know what could have changed since airac 0910, the latest airac i got and worked fine. i hope anyone knows how to solve this problem.regards,derek.

Hi!I've been using DAFIF for a while now, and so far I haven't been dissapointed. However, I downloaded 1013 for my level d 767, and no SIDS or STARS showed up on the FMC. What did I do wrong? I know someone just posted this, but nobody responded to that.

May I suggest having AIRAC updates for the Flight1 Mustang.

Terry, 1st off, Thank You very much for your service.. Just downloaded the PMDG cycle 1012 w/ holds, for use in MD 2006 & 737NG old. In both, the TEDDY intersection @ KORD is wrong - it shows FIX TEDDY LATLON N 13 44.033 W 60 32.933 & should be something like ( from old FLIP 9804 ) N 42 33.48 W 89 6.32. Again just a heads up. Thanks for all the work,RomanPS - I See this was brought up in March ( thread JVL.JVL5) , it looks like the problem remains w/ the DAFIF/FAA database.

Terry,Having trouble with LevelD 767-300 in FSX. Prior to cycle 1011 no problems. Since cycle 1011 and now 1012 unable to see arrivals/departunes in FMC. If I load cycle 1010 no problems with arrivals/departures.Get the following message when I try to view a file in either cycle 1011 or 1012: The XML page cannot be displayed Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later. --------------------------------------------------------------------------------A string literal was expected, but no opening quote character was found. Error processing resource 'file:///C:/Users/xxxxxxxxxxx/...<?xml version…

Hello, would the the feelthere navdata work on the feelthere emb-170 series? If so which one should I use, the erj and 737, or the crj-200?

Thanks for all your work, Terry. Appreciate the big collectionI'm programing a flight from EHAM, and noticed there are no sids listed, checked the eham.txt file and sure enoughSIDSENDSIDSAny reason for this? Online the EHAM charts have many sids listed. Im using 1004Thanks

TerryI have just downloaded the latest cycle 1006. However, the cycle that you actually get is 1005. Is there a problem?RgdsSteve Honey

HiI found the terminal procedures by chance. Great service!I have several payware a/c including the PMDG B737 and the Flight1 ATR.I downloaded and installed the latest terminal procedures. The install wizard chose the fs9 root location, so I assumed all the stuff will go into the correct folders.Anyways,I tried flying with the ATR, but as soon as I tried to load a saved route into the FMC, I got an error message that fs9 needs to restart. I tried several more times, (with or without FS2Crew), but the errors continued.I thought, therefore that a similar thing would happen if I use the PMDG 737 FMC, but that was fine- no error.I looked into the fs9 root directory under Fli…

Hi, I'm currently using payware Navigraph SID/STAR's for my PMDG aircraft range. Cliche but my home airport is LHR. When you a departing SID or arrival ILS. The way points are off line from the approach line already drawn. Also i know my final heading should be 272 for 27R. But i'm getting 275. The fmc pre-programs 272, but on the PFD it is showing 274. Any ideas how to get back my accuracy?CheersJames

Hello all,I need a little help. I have downloaded the terminal procedures for the Wilco/Feelthere CRJ200. I am able to select the appropriate STAR for my route however it does not show up on the LEGS page. Am I doing something wrong?Thanks.

Hi allI would like to know if a piece of software exist to modify or better create SIDS and STARS for the FeelThere Wilco Airbuses 1 and 2 family. These come with very few Sids and Stars and the one that exists are very old.Thanks for your Help.Bat :(

Trying to install the 1003 procedures. When I try to run the .exe, keep getting "This file contains invalid data." Re-downloaded 3 times with same result. Any problem with anyone else???

I downloaded and opened the file LDS_Procedures_1002.exe from planepath.com but upon opening it, it only refers to Level D in FS 2004. Can I install this for Level-D FSX?

On a recent Level-D 767 flight from KPDX to KORD via the MCW.JVL5 arrival noticed the coordiantes for the TEDDY intersection/waypoint are incorrect. A quick glance at the other coordinates of waypoints/intersection in the JVL5 confirmed the error.Paul KuhnCurrently KLGB

Anyone else have this problem? I have all the SIDS and STARS in my PSS777, and all the runways are listed, but none of the ILS runways are listed, therefore, when you insert one into your flight plan, you do not get the various fixes along the glideslope. I have updated the AIRAC using Navigraph and Terry's updates. What am I doing wrong? Thanks

Hi Terry,I am working on an airport to import into the PMDG74x and finally managed to import the runways and they show up...but they are not aligned nor am I at the correct end of the runway per the map(easy fix). The reciprocals also do not line up which is disconcerting. In the arpt.dat the runways are listed as lat/long but after the long there is another section ie. -98.646683000.0035401886 what is that?Here is the data for my runways. Could you help me convert the Long to the proper format?RWY MAG (TRU) LENGTH RWY START LAT/LONG Corrected Format?35L 347 (360) 12000 37.965877 -116 03.023213 AFC335L34712000 37.998790 -116.xxxxxxxxx.xxxxxxxxxx17R 167 (180) 12000 37.99…

Hi All,Can somebody please help me out with the STAR Arrival into London Gatwick? I have filed a flight from Cardiff (EGFF) to London Gatwick (EGKK) using Routefinder and it gave me this route:EGFF (0.0nm) -SID-> ALVIN (29.5nm) -L9-> BADIM (35.9nm) -L9-> WOTAN (42.5nm) -L9-> MALBY (52.9nm) -L9-> SIREN (60.0nm) -L9-> MIMBI (66.9nm) -L9-> KENET (75.9nm) -STAR-> EGKK (128.4nm) I found the Alvin SID chart to get me on my way from Cardiff to gatwick but the route says KENET STAR, the only chart I found which was relative was a WILLO (NORTH) but that just takes me to a hold to WILLO??? unless i've read it wrong???? what would b…

I set up a flight from KLAS - KLAX on FSX I know that the current runways in use at the time are 24r/l and 25r/l why am I getting vectored to the opposite runways.. and how do you change it to what is in use at that time...same problem at KSAN... rarely get rwy 27 approaches