MS FSX | FSX-SE Forum
Subforums
96377 topics in this forum
-
I've read on the flightsim network numerous problems with Airport 2002 and Wilco's lack of response.Any reviews/news here?Tim
-
Hi can some please tell me how you see some cracking screen shots of aircraft on the ground but they are surrounded by every thing you would see at a busy airport. I seen one the other day it was a 747 sat at the gate and it had delivery trucks along side,thins going on in the background. It looked so real. Thanks in advance. Shaun.
-
- 3 replies
- 815 views
-
-
I took the plunge and bought the Siai Marchetti SF260 by RealAir Simulations. Installed it and went out for a quick dusk spin from Kalmar, Finland.I can only fully agree with Steve 'Bear' Cartwright: this is the *best* light GA plane I've ever flown or seen in FS. It looks razorsharp (the VC is unlike anything I've seen before), handles like a dream and it gives you the feeling of really flying in small plane. This one really pushes the envelope, it's a whole new experience to fly.ciao, Dr.J (not affiliated to RealAir or any sim company for that matter :)
-
Hi guysI've noticed so many 747-400s coming in and out nowadays, PSS, Meljet, Posky, etc. etc. My question is that what out of the 747-400 realeases are the most high quality flight dynamics and visual model?Theres so many, I can't understand anymore....Thanks Shane
-
- 11 replies
- 1.4k views
-
-
It appears Fs2002 has developed 'antibodies' against this fabulous module and currently refuses to load if ActiveCameraPro.dll is present in the FS2002MODULES folder.I have been using this module without any major problems since its initial release. For me it has brought that certain something to the in-cockpit realism, hitherto absent, and now that FS2002 appears to be rejecting it I am experiencing major withdrawal symptoms :(http://ftp.avsim.com/dcforum/User_files/3dda42cb563179fa.jpgFS2002 refuses to progress beyond this point.Removing The ActiveCamera Pro dll module from the FS2002modules folder restores FS2002 back to normality.I have tried creating a new MODULES fo…
-
- 2 replies
- 654 views
-
-
G'Day all,Just thought some of you might like to know that Departure and Approach plates for Australia are avaiable for free through airservices australia here......Departure and Approach Procedures (DAP)
-
Just a quick question for you sim experts...when I download some planes and fire them up on fs2002..they all work fine except when I hit "Y" to slew around....after I'm done slewing and hit the Y key the plane immediately jumps into the air with full power.....like I said ...only some planes do this...any idea how to stop this annoying problem??? hopefully it's something to change in the confg file...you guys have helped me in the past so thank you all again for any help..
-
Wonderful Rio 2002 - Air Shuttle Express Pack 2. has anyone yet purchased this package that would like to offer there opinion about it. Looks pretty good ???CheersPete
-
Hi all. What would be the best setting for me so I can get performance and nice image quality?I am running a PIII 866mhz, 256mb-ram, geforce 2 mx 400 64mb, 20gb hdd.The AA, Direct3D, OpenGL settings, and the settings in FS2002, I really am looking forward to make FS2002 enjoyable to use.Shane
-
Well...This is a prime case of "Caveat Emptor"...I should have read the posts here before getting AP2K2 V1.I installed the software, fired up FS2002 went to LAX, went to "Spot" view expecting to see FSNAT in all its glory... What did I see??? NOTHING!!! What did I hear? NOTHING!!!Checked the display settings, everything set to "VERY DENSE". Went to "OptionsFSNAT". "Sound" and "System" both enabled. Tried "Demo", nothing. "BGL Control" It shows the objects, try to "Teleport" nothing.This is VERY frustrating... I've spent the last 6 hours trying different settings, uninstalling and reinstalling AP2K2 and cussing out my computer...Looks like I'll uninstall this thing and rei…
-
I received last week& tried to install in WIN98SE and system gave"
-
Seattle, WA - Monday, November 18, 2002 - Chief Captain Wilson (Six) Hines and Assist. Chief Shaun (Nortie) Holland of Bush Logistics Corporation (http://heavylhc.com) took delivery of Bush Flying Unlimited's 747-400F HEAVY and the Lockheed C-130H last night at KBFI (Boeing Field, Seattle, WA). After making a commitment to at least five Boeing 747-400F Freighter units with luxury First Class accommodations in the "topside" quarters, BFU's board of directors decided to cancel the project and thereby their lease with Boeing. Bush Logistics Corporation was the first to bid on the lease default and won the bid with Boeing as well we the order for five Lockheed C-130H transpor…
-
- 2 replies
- 592 views
-
-
Hey guys! Can someone post how the flatten file for Wilco's Airport 2000 V1 JFK scenery! ;-) And if there's anything else, could that be posted too?ThanxTomi
-
as im a great fan of the FANTASTIC biggles comics, i love fliying the harvard t-6 texan around the desert. has anybody got a clue if theres a fs2002 version out...????greez
-
I am not getting the option for 1600x1200x32 for my new Chaintech video card. I can get 1600x1200x16 but not 32... Is there a newer driver I need to use? Thanks...Also, how (step by step) do I upgrade my video driver?Thanks,Robbie
-
Hi all,When I use my log book after a flight it shows all the info, I clickok to save, problem is the log is not kept and I have to put in theflight manually when restarting FS, whilst not a major problem I cantsee what is making this happen? ;(8Thanks for any advice,Squitters.
-
so i spent $40 and bought wilco's A2002 v1. I install it by the book and BOOM!! FS2002 crashes anytime I try to load or fly near A2002 v1 airports, I get a "your computer has ran out of memory FS2002 will now close" otherwise, outside wilco's airpors FS2002 works like a dream. I have a PIII 1Ghz, 512mb of memory and an NVIDIA Geoforce mx with 32mb of ram and new drivers!! Now, how can I run out of memory!!!!! I run NOTHING on the background when I use FS2002 and I'm putting all sliders on MINIMUM parameters so I don't stress the system. Basically, so far, I threw $40 bucks down the drain!!! Anybody with a suggestion?? I greatly appreciate any imput. Whadzen :-mad :-8
-
- 6 replies
- 802 views
-
-
I've trying to connect the past two days and no luck: both servers down. Anyone else having problems?
-
I've had the YeoDesign 737-200 UAL and American for a couple of weeks now and really enjoy them. I have noticed a couple of mini-problems and wonder if there's a fix.On the UAL, the autobrake doesn't work. That can make things pretty hectic when you land because you gotta manually apply wheel brakes, speed brakes and reverse thrusters with two hands.On the American version of this craft. the autobrakes work find but the cabin dooor doesn't open with SHIFT+E even though a banner appears that says "main door open".I can live with both these problems because the planes perform so beautifully otherwise. Just wondered if there was a simple fix.Thanks to YeoDesigns for their pl…
-
Hi, New card that's I am waiting for, price will drop for next years(Fs2004) and even better card from this models.....Press next at the bottom to see all reports from this card.http://www.guru3d.com/tech/geforcefx/AGP 8XTwice as fast compared to a GeFore4 Ti 4600500 MHz thus effective 1 GHz frequency !!0,13 micron GPU fabrication 125 million transistors (give or take a few, I didn't count) DDR2 memory clocked at 1 GHz 51 billion floating point operations per second (51 gigaflops) in the pixel shader alone Advanced Programmability (3rd generation) High-precision color (64-bit & 128-bit color) High-level Shading Language New Vertex and Pixel Shading instructions High…
-
Hi!Has anyone found what to do about the annoying fact that the ILSglideslope doesn't work properly with FS 2002.With addon planes and addon sceneries your 737, 747 or, whateverjust drops and droops on the glideslope and you end up "landing"2-300 yards before the runway.Very annoying.To my knowledge nothing has been done about this from Microsoft yet.Has anyone come up with a solution to the problem yet?Happy for tips.Thanks.Hans HermanssonSweden
-
Anyone else download the Buffy/Vampire Slayer texture? Just wondering if I was the only one seeing different textures from what all the previews have, and the readme has no email address to contact the author.Not asking for tech support or anything -- just wondering if I am the only one is all :-)By the way, if anyone did DL the texture and it did not appear at all, you have to rename the main texture. It IS the 737, but the main "t" texture is named 747. Changing this didnt correct the rest of the texture though. In the previews on AVSIM it looks like 4 faces on the side with a nice font. The actual texture on my comp comes out as 1 face on the side and some terribl…
-
Hello Wilco,I'm sure you guys are busy putting the final touches on your upcoming A320 PIC. Me and my fellow simmers where just interested in an update on what stage you guys are at. This will help me so I can plan when to order etc. Any help and assistence will be greatly appreciated.Thank YouPilot 737:-)
-
If you were one of the individuals that took part in the flight sim focus group last night the 14th in Dallas please contact me offline at [email protected]. Thanks...Jeff
-
- 6 replies
- 1k views
-
-
Using my newly arrived multi channel data recorder I went on a flight with the Excellent Debonair by Geoff and recorded what happens when you are at 5000 ft, at cruise power/speed, on autopilot, and you run out of fuel while sleeping, or doing other things and do not take control of the aircraft. ;-)Angle of Attack 180 = level flight in this data set. Values below 180 are NOSE UP values. True AoA = 180-Graph value. we will fix next time.http://ftp.avsim.com/dcforum/User_files/3dd965292ea951df.jpgI don't think anyone is alive that has any real data to tell me I am wrong. ;-) Enjoy.BobNeed help understanding the dynamics of your new release?we r [email protected]... We wor…