FSReborn Series user-to-user Forum

Dear Simbol, I realized, that for the following models the landing lights are missing: FAIB Airbus A3180/319/319S/320/320Neo/320S/321/321Neo/321S FAIB Boeing B762/B763/763W Rest FAIB 737 family and 747 family is fine. What is the function of the file FSRLPMBKP.INI in every aircraft folder? Many thanks and best regards Oliver

Simbol This is what is being generated in the aircraft.cfg. Visibly you can see two sets of strobes and beacons on the plane, and one set is not in the right position (ie off-set). I am using the NWF models and have checked that I have the right model in the right folder (ie my NWF model is not aliased to the WF model). Have tried resetting and copying the original aircraft.cfg into the folder but still creates the duplicate for all FAIB 747's. [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing light.0=3, -203.3, 0, 10.35, fx_fsreborn_navwhi2908 light.1=1, -18.7, 0, 19, fx_fsreborn_beacon2908 light.2=1, -67.5…

I'm looking for help to resolve this issue... landing lights remain on while parked and no Navs, which i'm quite happy to have permanently on. It's the FLAI/AIA E195. https://photos.google.com/share/AF1QipMN28S8r1BWZ1r4axHDuLsEkMW4PRpd8BP-D85ML6dHEwMULW1WQeFDZy2JaUUP2w/photo/AF1QipPI_ti08Zm_feUJbuCSHkkRQnXyIupEnDUYB5ty?key=ZDIwdFFTTDhzSUdCdUlPYmstRXdVYlNBdmNXYVNB

Greetings AILRP Users, I hope all are having a great New Year so far. I wanted to let you know that Volume 2 of the original Group Spreadsheet above is in work. Since late December I have been working on a complete revamp of Volume 1. Using video references I am making substantial changes to the original sheet for Nav, Strobe and Landing Lights as well as the texture settings. In addition, I am reworking the Groups and have made some additions/deletions. Again, this is not intended as a must use, instead it's meant to be a starting place for new users as well as anyone wanting to start using groups. As before I hope this will encourage folks to experiment and po…

Hi, Sorry to ask for help again, it's a similar issue to what I had before. So for some reason this afternoon I've gone to use the programme and all my work that I've already done has disappeared , the groups and all the changes were still there but all the aircraft had gone. So assuming there was an issue I've reinstalled it and now none of the models are being detected at all.... My AI is all outside of the main sim and I followed the instructions from here and it was all working fine up until today. Any ideas what to do? Thanks, Oliver

So are you really curios about what I have been doing? have a look below at this sneak preview of the upcoming PMDG 737 NGXu immersion package. https://fselite.net/news/parallel-42-announces-pmdg-737-ngxu-immersion-exclusive-image/ Regards, Raul

Dear All, We are very pleased to announce that Flight Sim Technologies (FSReborn trading name) has now engaged in an Strategic Partnership with Parallel 42 in order to advance the future of Immersion Packages. Full information can be found here. Our strategic partnership started last year and accordingly we are already working full time on the 737 NGXu immersion package, which will have a couple of surprises for everyone. Personally I am very exited to work with Keven and Edson and I cannot wait to see the reactions from all of you when you see the stuff we will create together and In addition I will be developing further immersion packages in the future. …

Hello I have installed the Pro version, but the software does not find any AI models installed by AIGTech OCI. My concern is that the reason could be that OCI is using an UNC-path instead of a drive letter in the add-on.xml in my setup Cheers Greg

Hi, I had to reinstall my simulator and now I want to reinstall FSReborn Pro Edition. Where can I download the setup file? The link in the E-Mail is dead, and there is no link to download in the license area. Thanks for the help!

Simbol I notice that the A320 strobes are double in the preview, and generally are double on all my A320 family when the strobes come on as they line up and hold. However, the ones landing have a variety of strobe timings, and as soon as you change the simulation rate, it screws up all the double strobes. What does AIRLP use to drive the strobe timing? Can anything be done about this? Best regards Rob

I purchased your product back or around Jan 7 2020, I cant find my activation license. Was paid via paypal. Could you resend. Ive already tried going through the website, but have gotten no reply. Thanks so much Eric

Hi I am strugling to give FAIB Boeing 747-8 the corect strobe lights (I am using the wing flex modell). This Aircraft use Led strobe with a single flash in the real world. I am only able to get led strobe flash with duble flash (The Airbus style duble flash strobe). Is the any way to edit this so i can change between single flash (Boeing style) and Duble flash (Airbus style) strobes? Thanks for you amazing software Best regards Steinar Grindstein

Hello, I noticed that there are three settings for the scaling technique in the Pro Settings: default P3D, 1080, and 4k. What scaling technique would you recommend for 1440p? Regards,

Great product release. congratulations. I installed immediately, but do not load any AI. How can I specify the scan destination? please tell me. Thank you.

Dear All, We are pleased to announce that Corey Langford from New Zealand has won the second raffle for a copy of AI Lights Reborn Professional Edition. For the rest of participants, do not feel disappointed as I am currently emailing each of you a consolation price.. so be sure to check your emails very shortly! Kind Regards, Simbol

Dear all, Just a short message to let you know we have launched a new Facebook page so we can reach new audiences. You can find us on Facebook via this link: https://www.facebook.com/FSRSimbol and If you have a Facebook account and you like what AI Lights Reborn can do for you, please leave feedback and rating about the software. All the best, Simbol

Simbol What is the best way of dealing with (mainly P3D v4 conversions) of models like the AIG B757's (currently on v3.1). which now have all the lights in the .mdl file including beacons, navs and strobes. A lot of strobes going off once AIRLP has processed this along with the aircraft.cfg lights entries. I have tried removing the non landing/taxi lights from the model, but wont recompile properly. What does AIRLP do with custom lights (have their own separate as opposed to fallback effect file)? Would I be better taking all the entries out of the aircraft.cfg lights section? Regards Rob

Amidst the Christmas carols, mulled wine, mince pies and mounds of presents, may your heart be filled with contentment and the unique feeling of joy that Christmas brings. I would like to take this special occasion to thanks everyone for supporting FSReborn during our first payware product launch which has been a wonderful experience. I feel very grateful about how well AI Lights Reborn Pro edition has been received by new customers which keep growing and growing on a daily basis!. I cannot wait to keep delivering more content to everyone and I would like express my most sincere gratitude to everybody that has placed their trust in my product l…

https://imgur.com/zAB8Mkt I have to click a thousand times for all of them in this folder. Thanks Simbol..Happy Holidays to All!!!! BobM.

We will like to congratulate David Guadagno for winning the FSElite raffle for AI Lights Reborn Professional edition. For the rest of participants of the raffle we would like to announce that as a consolation price we will launch a second raffle which will end the 26th of December. To enter the second raffle please submit an email to [email protected] with the subject Christmas Lights. Happy holidays to all, Simbol

Hi Simbol, I'm having this issue when I apply modifications to some FAIB models, more precisely the 737NG ones, navwi, navred and navgre. Oh some A300 also, with this ones the nav light hides inside the wing so obviously does not get to show in the sim. The lights get displaced when using the app. So what I did is corrected the position with MCX and re run the app and it moves them for whatever reason. The thing is that it moves them to a position where it does not look good or it doesn't show, as explained before. Hope this could be fixed, thanks a lot

I assume that all the the FSP models have now been updated to work in FSReborn, except for the MD-11. The MD-11 was updated for P3d4 fairly recently: https://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=207360 but since it's freeware, it seems to still have non-compliant lighting. It's used by AIG OCI for various freighter liveries.

I use AI Lights Reborn Professional Edition. After the Check the Program gives me the Info that on some AI Models the Stobe Lights are Missing or the Beacon Lights are Missing. Ont the two FSPXAI 737-max 8 and 9 Models AI Lights Reborn Professional Edition tells me that they are not supportet. Is there an simple way to solve this issue ? Thanks Michael

I see an update available that includes compatibility with FSReborn AI Lights. Thanks to Simbol and Missi for getting their heads together to resolve things so these great products work nicely together.