FSReborn Series user-to-user Forum

Dear Simbol, I have changed my most FSPXAI models for A330/340/380/777 to TFS models V2.1 (without wingflex) and all works perfect now. TFS models greather V3 works not, because wingflex and embedded effects in model. 1. Question: Your program realize lights only via light sections in aircraft.cfg? If effects are used embedded in models (and if that effects reference to P3D standard effects) are also realized by your program during scan process? In my prevoius post you wrote: ... Regarding FAIB, are you using wing flex or non wing flex? Wing flex models attach effects via the Model and again limitations will occur. Another thing to check is to be sure you d…

Hello Simbol and Beta Team, as to the Boeing 787-800 and 900 am I correct that there is presently no AI model on the market -no freeware no payware - which is supporting the P3D SDK requirement? My UTL 787-800 and -900 are shown as NOT SUPPORTED. Tks for input.

Is this typical to have FSReborn lights on my aircraft? I get this on default aircraft and a couple of payware aircraft like the TFDI 717, Flysimware LJ35, Flysimware FA50. Thanks

Gentlemen, I'm getting a "Missing SimObject category, ie: category=Airplane, Boat, or Animal" error after a scan. The error is with an FAIB B737-900 winglets model. Any suggestions? Thank you!

Hello, I have the pro version installed, but before I start messing around with it I'm trying to understand what the program does by default and what requires more user intervention. I did some spotting and noticed that I had A320's without the strobes operating as they should be (or as I saw in the teaser video). The wingtips were double strobes, but the tail strobe was as well and was flashing after the wing strobes had flashed. The strobes didn't look as impressive as in the teaser video so I'm wondering if I've messed something up altogether. Do I not have this installed properly or is that aircraft-specific light pattern something I need to go and add by aircraft…

Two questions about the "Preview Settings" mode. 1. Clicking the "Preview Settings" button is supposed to load a special preview scenario which opens you up at KECP in the R22 about 300 ft up and looking back at one of the runways. In my case, clicking the "Preview Settings" button sees me somewhere out over the ocean, surrounded by water, and not in the R22. Rotating this view through a full 360 degrees confirms nothing but water and KECP is nowhere in sight. I can "resolve" this situation by using the Observer views from the main P3D "Views" menu (right click menu). Choosing one of the observer views from the sub-menu does take me to the correct, relevant observer …

I am still getting 'unsupported'aircraft models when I scan Ai reborn. how do I remove or fix this because i think it is causing ntdll.dll CTDS Paul

Hello, Sorry if this may have been asked before. I'm currently running three AI packages. AIG-AIM, FLAI, and FTX Australia. Where ever appropriate it seems AILRP correctly adds the '[FSREBORN_LIGHTS_CTRL]' section to the aircraft.cfg. I'm putting together a sort of 4th package. Mainly for testing purposes but also to add a few airlines not covered by the other three packages. With all four packages activated via add-on.xml, I applied my AILRP settings. I'm just using the default global fleet option. In my test package, the aircraft.cfgs got modified at the time I applied the AILRP settings. On further inspection, not only was the '[FSREBORN_LIGHTS_CTR…

Hi Simbol When I conduct a scan, no AI aircraft is detected. Currently I have my AI aircraft in a folder P:/AI Aircraft, linked to the sim using Lorby's organiser. So am I right in thinking I need to remove that link using the Addon organiser and create the .xml file myself, as per your pinned topic above? If so, can I use my existing names and file set-up or do I need to use the naming conventions you and file string you refer to? Also, the related effects, such as the FAIB strobes are in a folder called P:/Addon effects which contains all addon effects (including boat and plane traffic etc) and is also linked using Lorby's PAO. So do I need to do anything wi…

I used Just Flight's Traffic X in FSX for years. Even after Traffic 360 was released, I stuck with Traffic X, purely because Traffic 360 did not have a function to allow me to import all the countless hours of work I had done in Traffic X on keeping flight plans, repaints, aircraft and everything all as up to date as possible. When it came time to move to P3D, I moved all of my Traffic X models, and associated flight plans, over to P3D V4.5. The Traffic X program wasn't compatible with P3D 4.5 and therefore I am using AIFP now to manage my AI. Short version … I am using Traffic X models for my AI in P3D v4.5. I purchased AI Lights Reborn Pro after reading that it…

Simbol, I am getting a "System.NullReferenceException: Object reference not set to an instance of an object." when I press the "Preview Settings" button. I will send you a PM with the details.

Hello, I installed AILP, and my airliners don't show up in the scanned aircraft list. I have 2 drives; 1st drive has the Windows 10 OS with FSX installed 2nd drive has P3D v4.5 installed, non OS The P3D drive has Military AI Works installed on it, along with all of my ai aircraft in the same folder, but only the MAIW ai aircraft show in the AILP scanned aircraft list. Should I reinstall AILP on the P3D drive instead? Thanks!

Settings that I use in Preview mode works but not in regulator via UTL generated traffic. I tried to set my navigation lights very high. It works on 'Preview'ed injested FAIB 319 , but not in UTL injested regual mode. I am I missing something?

Hi, A screen layout in P3D V4.4 is not possible, flickers or stays dark. best regards gerd

I just loaded up at LSZH and watched a Swiss Air A330 take off. It showed the taxi and landing lights and logo light but I did not see the nav, beacon or strobe. Its a TFS model in FLAi. The Utility shows everything is OK with that aircraft? Am I missing something? I see the FSReborn Lights CTRL in the CFG.

Hi Simbol, my congrats and a warm thank you for Reborn Pro, a "tiny" tool for a lot of more realism in the sim! But I´ve some question: First: The title says it all, is a list of supported / unsupported models (mdl-files?) available? I use +50% AIGAIM , the rest is own created AI traffic with models of FAIB, TFS, FSPXAI and much more. Second: Regarding to the AI Aircraft Models Stats report I got 395 models missing strobe, 2 missing nav lights and 400 missing beacon. Mostly FSPXAI models. Could this be ? In total not supported are 33 models. I think, I have to improve a lot in my sim.... ;-(( Regards Michael

Hi Simbol. I am a new user and also a slow learner. Running P3Dv4.5 [no hotfix] and Traffic Global. Is there a way to turn down the intensity of lights in the free version? [Also using most ORBX scenery] Thanks! Lennie in North Carolina

Whilst AI is configured meantime nicely as to all light effects and landing lights aswell as white wing strobes are in my configuration well seen for several miles at night when looking from the landing strip towards the front of the incoming AI aircraft during daytime both landing lights and white wing strobes only switch on round about 200 300 feet above ground before touchdown. Before that they are off. Is this a feature which I can influence, as also during daytime I believe white strobes and landing lights should be switched on well before tocuhdown when some miles outside still. Is this a matter I can influence in the aircraft.cfg or is this influenced by …

Dear Simbol! I bought AI Lights Reborn Prof. Edit. and I use the AIGTech AI-traffic in P3D V4 (newest hotfix). Everything looks nice, but I miss the beacon lights on every single aircraft. There are no error messages regarding that present in the "dashboard". I also use Lorby´s Addon-Organizer..... Any idea, how to fix this? Thank you very much and best regards from Curacao! Lars

Hi Guys, I met you at the Cosford flight sim show and I was very impressed with your product, I hadn't heard of you before the show, even though I've been flight simming for 15 years or so. When we chatted you told me the product wasn't working with JF global traffic but you were in discussion with them as to how to get it working. Just wondering whether you had any success at getting your fantastic product to work with it yet. Thanks.

I'm noting that when viewed from a fix position (start of a runway for eg) the incoming ai' strobes get desynchronize (Airbuses no longer blink 2 quick flashes, Boeing's no longer blink both strobes at same time ones), they both blink in different patterns, like before pro app installation. When I switch to tha ai view of that particular ai, strobe lights blink with the new realistic pattern or way. Well, just re tested and it randomly switches again to not blinking as it should. I switch view to another ai and after a few switches of different ai's it works well again, but then desynchronizes again. There's something going on here. I'm using normal simulation rate.

On installation I am getting a message saying there is a potential conflict with addon Flai which is preventing the FSReborn effects being displayed properly. It is recommending disabling the effect declaration in the ad-on xml file for the file causing the conflict. Where is this XML and how do I edit it (what should I do)? Thanks Paul

OK Simbol, here's one for you to chew on...😀 I have a 4K screen, so I applied the 4K configuration. After a day of being very happy with your prof. version I discovered a problem that after a day of sleuthing I tracked down to the 4K setting. On several of the older boats (Tongass Fjords, and some of the RTMM scenery boats) the wakes are really screwed up by the 4K setting. After I reverted back to the P3D default configuration they were back to normal. I don't even want to talk about how long it took me to figure this out, but suffice to say I was some what shorter of hair... Bob

How do you download and install an update? How do you download the program again? Thank you.

I've just purchased and installed the pro version and only lights I see are logo lights, I'm using UTL I may be able to see some nav lights but they so dim they may as well be off, no strobes either, it should be all good with UTL yeah? Regards Rod.