FSReborn Series user-to-user Forum

Hello I just purchased and installed AI Lights Reborn Pro Edition Pro It is written that we can certify the solution works with the following AI packages AIG / AIGM-OCI But after installed I got this I do not understand ... Can someone help ? English is not my mother tongue... It would be nice to use basic english... Plizzz Error Config File The LIGHT Section is missconfigured as the effects contain invalid characters inside the effects locations, please verify only numeric values are used for the effects coordinates and that all positions are being configured (z, y,x), sometimes the lines are missing commas, etc. E:\AIG_TRAFFICCO…

I have just bought this product today and installed it on my system, when I go to open it I am presented with this initial error: I click continue and soon after I am given a new error: I'm running P3D v5 and the install path in Reg Edit is fine. Another program for P3d that I need to troubleshoot before i can even use it. Ryan

Hey, I have been using AILRP with UTLive2 latest beta. Originally there was a mdl file renaming issue for 738. I was able to easily fix that but there are 8 textures for which I am just unable to fix. The other textures are working. I just can't figure on how to fix this. Thanks Simbol. Error Config File Invalid Model file configuration for aircraft title = UTLive_789.AAL, model file cannot be found, model name AILRP is looking for= C:\SIMULATION\THIRD-PARTY\FLIGHT1\ULTIMATE TRAFFIC LIVE 2\UTLIVE2 AIRCRAFT\789\Model\.MDL C:\SIMULATION\THIRD-PARTY\FLIGHT1\ULTIMATE TRAFFIC LIVE 2\UTLIVE2 AIRCRAFT\789\Aircraft…

Since windows update this week KB4565483, i get an unhandled exception error when going into the sim at the point that AILRB loads but the sim still loads to the flight setup screen and runs OK. FSRebornConfigChecker.exe 1.20.8.0 8d45933d KERNELBASE.dll 10.0.18362.959 7b90c1b5 …

During the day, I find that the landing lights of departing AI is too big https://ibb.co/4mjXvsh Any way to reduce that. I starts small from the ground and then increases in size as is takes off continuasly until the lights diapears. I find it to be a bit too much

Hi Simbol, since updating your AILRP to 1.24.0.0 yesterday, I got massive performance decrease with AI upon the air (so when airborn) and only if AI planes are on my ND within a range of 40NM. Mostly it occurs when I have 3 to 4 planes within this range. 1 does not really hit...but beyond 1 is getting massive hits. It does not always hit FPS with 3 to 4 AI in range. So maybe it is related to some models? Massive means, if I switch off AI traffic at that moment the FPS went down already, by reducing the in sim sliders to "0", my FPS goes straight up from 25/30 to 40/45. Within VR it is very noticeable also. But switching VR off and test again, this hit is also n…

Dear All, A new version of AILRP V 1.24.0 has been released to general public, if you own AI Lights Reborn professional the software auto updates should pick this up automatically. If your version does not pick this up automatically please add AILRP and all the executable's inside the software the directory to your security software white list (antivirus and firewall). Please note this update is MANDATORY or you will have severe problems in the future with P3D hanging during load. If you experience this, disabling AILRP temporally will alleviate the problem until you are able to update to version 1.24.0. [1.24.0 Change log] (18-NOV-2020) NEW: Further …

HI, i have the Pro edition installed together with P3D v5.1 What i see is, that the Landinglights are (especialle on the AI aircraft in flight) not realistic in a greater distance. It looks like that tha airplane is in a "fireball". I turned down the effect size for the Ldg Taxi lights to -50%, but still it`s starting this appearence. So, i just stay on a taxiway and watch the AI planes approaching the RWY (on final), so they are about 5 to 10 nm out and beeing in a fireball. Coming closer it is getting better and better until i see all landing light seperately. (maybe 1 or 2 miles out). Is there any way to correct this ? p.s. the…

Hello Symbol, I upgrade my server PC to a windows 10 to be able to upgrade to P3dV5. Now when I try to run the program, I get a Microsoft.NET Framework error message. It reads UNhandled exceptiom has ocurred. I also notice the the path to the simulator is incorrect it reads: P:\Lockheed Martin\\ Prepar3D exe, where it should be: P:\Lockheed Martin \\ Prepar3Dv5 \ Prepar3D exe. In my Windows 7 PC I had AI lights in a different SSD than C, so for the new configuration, I just took that disk and plugged into the new server. Should I deactivate the license? Thanks Juan G. Ducaud

Hi @simbol, today I saw following strange effect at some of the planes taking off at EDDF. I have AIGAIM installed, only free packages. Al up to date as far as possible. I don´t use a single P3D.CFG Tweak. All clean installed. Your product is up to date. Any ideas? Affected where at least Strobes (Slow on/off) and I thought also "Landing lights". This occurs only at further distances. Nearby (direct Airport Area) seem not to have any problems. The further away, to more this issue appears. Regards Marcus I use following settings:

Hi Simbol - I updated my P3D 5.1 today (client, content and scenery) and ran FSReborn Pro to make sure things were OK and I am getting a message saying my P3D addons .cfg is contains entries that do not exist. It is referencing an entry for FSLabs but oddly I have had that uninstalled and I also checked the .cfg and I see no entries at all in there referencing FSLabs. Do you have any idea why I might be seeing this?? Thanks! Eric

Dear All, A new version of AILRP V 1.22.0 has been released to general public, if you own AI Lights Reborn professional the software auto updates should pick this up automatically. If your version does not pick this up automatically please add AILRP and all the executable's inside the software the directory to your security software white list (antivirus and firewall). Please note this update is MANDATORY or you will have severe problems in the future with P3D hanging during load. If you experience this, disabling AILRP temporally will alleviate the problem until you are able to update to version 1.22.0. [1.23.0 Change log] (27-OCT-2020) NEW: Update s…

I am getting an error on the program startup (exception) where it says it can't find something the the cameras.cfg file. I have the file in place and can see Chaseplane entries. Any ideas?

Is anyone else having an issue with 1.22.0 throwing a .Net exception? Here is what I am getting: ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at FSRebornAILightsConfig.AIModelsLightsConfig.Load(Boolean LoadStats) at FSRebornAILightsConfig.Configuration.F6Hoao9TIi(Object , EventArgs ) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at …

There is this AI Traffic Reborn Runway Control button on the home page and it just says you won't reveal too much about it, but can't you tell a little bit about what it will do (faster runway exits, more natural braking of ai so it won't stop almost before the first exit, etc. etc.?) and maybe how long you are in the development? Jlund

hi just watched rob create some presets in his tutorial , as anybody made any presets out for public use, i could try and create, but too busy ( and even more lazy ) 😉

hello all, just bought reborn pro edition off the website , all was going well until i clicked on the download , i breifly saw what looke d like a serial key but i have no idea whats happened to my purchase ? any help

Hi Simbol, what do I have to do to install "AI Lights" on a new PC?

Hi I have sent a request to support to reactivate my license. When can I expect a reactivation. Thanks Hani

I was advised to check to see if "cockpit lighting" is enabled in the lightmap... I use AIG-OCI and I noticed on this aircraft and some others that there were no cockpit lights on so I thought I would ask here since "The Pro" resides here :) This is one model: EMB 175...RFS_E17Xmodel=OW_rev3 Thanks for any help, BobM.

hi simbol just reinstalled windows 10 and p3d v5 hf2 now having problem with activating ai lights reborn pro hoping you can help please

Hello , I try to load AI Lights P3D Plane Config but sim was closed at this Moment . Then i try to start the Sim but now every time the Sim Crashed to Desktop at 74 % when the AI Traffic Control loads . Thanks for help Michael

Hi, I just wanted to quickly clarify if it makes any difference if you install the FLAI AI package with the Dynamic Lighting option enabled or disabled. I am wondering because some of the AI models, for example a lot of the A320s the landing lights wont show up. Thanks for your help. Best Regards, Christoph

Hello, I just ran Lorbi check-up and found out that AILR shadersHLSL component is missing even though the path is included into add-one.xml. I checked the folder itself and it's present. Don't know whether I should ignore it or not Here is how it's written into the xml file Program Files\AI Lights Reborn Professional Edition\FSRebornHLSL V4</Path>

Good morning, Yesterday I sent a request to reactivate my license as I messed up with the password for a couple of times. Still haven't got an answer. Would appreciate your attention. Thanks Dmitriy