PC12 FSX | P3D

Any one else seeing very dim landing and taxi lights? My other AC seem fine, but, on the PC12 both taxi and landing are so dim I can't see 10' in front of the aircraft. Any thoughts appreciated.

After flying for about 15 minutes the cockpit screens go dark in P3D v6. Anyone else having this problem?

Hello all. I’m in need of some assistance with an issues I’m having with the PC12. When I load the plane in cold and dark the landing gear is in the up position, I can’t move the PCL, or condition lever, and other weird things. I’ve tried toggling between legacy and lock in cockpit interaction. I’ve tried to uninstall and reinstall. PC12 worked great at one time. Then three weeks later it’s not working as before. It seems when selecting a switch or lever, it responds as normal, but no animation. Example the Generator 1 and 2 are in the on position in cold and dark. Yet red light on showing its off. When selected red light goes out. This is odd and unfortunately I’m not ab…

Fully loaded as in fully loaded with the the following, Community mod pack Next Gen engine mods McCoy & PFX Effects PBR exterior model GTN 750 Embed the Roland Weather Radar into the EX500 GPS VC floodlight mod 18 distinct coding bugs resolved in gauges and model xml 17 additional liveries Radars, this is the ASN WX gauge as a popout. The Roland embeded in the EX500 A couple of new liveries Cheers

Hi all- I have somehow lost all my Shift + x views in the PC12. So, is there a way to reinstate these, or perhaps a way to assign a window to a button using the PC12 .cfg? I see the list of all the windows at the top of the .cfg and what's contained in those windows below. All these used to be the Shift + x combinations. Anyway, any ideas? Thanks, Mark

Hi Everyone, I love the PC-12 (with everyone's mods) and have been building hours in it. One thing I have noticed is the dim landing and taxi lights in P3DV5. By comparison, my A2A aircraft have fantastic landing and taxi lights. Is there a mod or fix for this in P3DV5? Thanks in advance! -Jody

Hi all- I'm using the RXP GTN and have no use for the stock 530or the Avidyne for that matter. I've tried to comment out several gauge lines that appear to be related to these but have had no luck. If someone could point me in the right direction I'd appreciate it. Thanks, Mark

Hi all- There are two green markings on the little trim meter. One horizontal and and a smaller, shorter green one one pointed at about 15 degrees down. Following procedure, gear and flaps up at 100 KIAS, I have to dial in a LOT of down elevator trim to get this thing on a 1900 fpm climb. Is this normal? Thanks, Mark

Hiya, On request of Airbus-lover "Boeing or not going" 😋 i've starting experimenting with reducing the effect of the "floodlight" in the cockpit. Did 2 things, changed the colour and also reduced the brightness. The result is below, top default, bottom modified textures. (turned out i had to modify 4 texture-files to get all the colours in line) What do you guys thing of this? Regards, Marcel

I just updated my P3D V5.3 to HF 2. At night on my Craenado add-on A/C landing or taxi lights do not illuminate the R/W. When looking head on the lights are lit but when looking from the cockpit there is no illumination of the R/W. Dynamic lighting in Options is on. Is there any fix to this. I have looked through forums but have not found any answers. I had A2A lighting effects in FSX but I don't think that works in P3D. I have no third party lighting effects loaded into P3D at all. I have pretty much cutout night flying because of lighting issue. Thanks for the help. Dick

Hello, the aircraft has recently developed an autopilot problem where it does not follow either heading and flight path determined by the Reality XP flight plan. The aircraft continuously waves from left to right and does not appear to capture neither. I have removed and reinstalled Ultimate terrain (US and Canada) and it flies great, if I shut down the sim and start another day, the problem starts again. I have removed and re-installed both the aircraft and Reality XP, with same results. Now, if I place the aircraft in western US or Canada or Europe airport, no issue! This happens with only this airplane, Any help and or suggestions wou…

Another release, this time it's the brand new SurfAir livery, for N809SA. drive.google.com/fil...R3M/view?usp=sharing

I just bought the PC-12 yesterday. It is indeed a nice flying aircraft. I am just doing pattern flights with it at my GA home field, KSEG in Selinsgrove, PA. I have already adapted RXP GNS 530s into the panel. Once I'm check ride passable with her I will fly her down to KLNS near Lancaster, PA so Lancaster Avionics can swap in GTN 750. They will loan me an A2A Skylane rental to fly back to KSEG in. I will pick up my GTN equipped PC-12 next weekend. One must create a mission where one can in FSX-SE. Right?

I have active sky next and am wondering if the native weather radar for the PC-12 works with active sky next? I have not been able to get mine to work yet. Not sure what I am doing wrong if it is supposed to work and is compatible. I am using P3dv4.5. Brandon

Will the PC-12 work in version 5? Thanks

That shouldn't happen should it? Was only using about 3/4 torque Have Autogyro Peike mod. FSX-SE. Running Accufeel Active Sky. Suspect some turbulence that day. Still, 212 isn't too fast for 12k. Any ideas Thanks

Bought the PC-12 on Saturday and here are my troubles. Fly it by the numbers and still having difficulty with approach and landing. Four landings now and the first two went off the end of a 4750 foot runway. STOL? The brakes are not represented very effectively. Third landing was good. Only needed half the runway. A fourth one just today the aircraft yawned left just before the mains touched and I went off the runway. Seems to bleed speed off very slowly also. One reviewer said it's nearly easy as a Skyhawk. I'm not sure about that. I had better performance even with the other turbine single, the TBM 850

Hello I'm newbie here and I have a question(and i don't know even if i'm posting right), if someone has done or made an Carenado livery for N56EZ, which I love that paint scheme and I didn't found it. And if not, could someone made them? Thanks if u are reading this! 🙂

I'm currently building a PC12/45 cockpit, I've made some of the generic gauges already and i'm about ready to build the panel, does anyone have the dimensions of the panel of the PC12? or know where to find them?

Hi Folks, Just recently reinstalled the PC12 in P3Dv4.5 HF3 with dual RXP GNS 530 v2's. In GPS mode the CDI is not deflecting when right of course. Left of course it responds as expected. The VOR indicator responds correctly whether right or left of course. Have been fussing with settings and searching past posts a couple of days and coming up empty for a solution. Anyone have any ideas? Any help would be very appreciated. Thanks, Jesse

I’ve had a bit of a lay-off from flying the Carenado PC 12. Does it have a TOGA button and where is it located. Lantz

Does anyone know how to set the heading indicator/gyro (not the heading bug) in the carenado Pilatus pc 12 in P3D v4? (realistically, without using the "D" key...) 😉 Thanks.

If I pop up the GNS530 display and change things and then unpop it, the unit in the panel does not show the changes I made. Anybody else experience this? -Ed

I´m using Active Sky Next, which also provided a WX screen for free installation on any A/C. My question: is Rex WX Radar worth to buy, or is there no visually improvement compared to the Active Sky Radar ? Tks, Peter

....for the mod. Made a short flight and I´m very impressed about your work as well those from Autogyro. Peter