Voice Control Version

IMPORTANT NOTAM: 25 July 2020: The Majestic Dash 8 Q400 Version of FS2Crew has been updated to Version 3.5 with free P3D V5 support!!! HOW TO GET THE UPDATE: 1. To obtain the FS2Crew update, please login to your FS2Crew account and click "Completed Orders" and re-download the Main Installer. There is no stand-alone updater. You do not need to uninstall the previous version. 2. 3rd party vendors may not have the file yet. Please give them several days to upload the file on their server. 3. Remember that the P3D V3, V4 and V5 versions have their own separate FS2Crew Config Manager which you need to use to 'enable' FS2Crew in P3D V3…

Dear Majestic Dash 8 Captains, I'll keep this short and sweet! FS2Crew has been around for 10 years, and everyone knows what it does and what we are! We're the #1 provider of realistic airline crew simulations, bar none B) Right on schedule, FS2Crew for the Majestic Dash 8 is available for download! If you've ever purchased FS2Crew before, use the coupon code DASHCREW to get 5 Euros off as a reward for supporting us. VERY IMPORTANT: Your Majestic Dash 8 Q400 must be updated to VERSION 1.00803 or later! That update was released on March 27th 2014. You must have that update installed prior to installing FS2Crew or you will see in red letter…

New FS2Crew - Majestic Dash 8 Signature banners! You can use these on Avsim or any other forum! Enjoy! Direct Link: http://fs2crew.com/banners/Banner_FS2Crew_MJC_Line_Pilot.png Direct Link: http://fs2crew.com/banners/Banner_FS2Crew_MJC_Supporter.png

Perhaps someone can help me. I am new to fs2crew and q400. Trying to practice my sid departures to get better. What I try to do is … fly a sid, pause the flight when done, then relocate aircraft to runway threshold to practice the SID again. Q400 seems to accept this trick without issues. FS2crew does not seem to like it. When I takeoff a second time, it will do the before takeoff checklist, respond to « check power » but not call any speeds, not even respond to « gear up ». If I do a circuit and land the aircraft instead of just warping back to runway threshold then I have the same issue. I do use the arrows to cycle the phases of the flight and bring it back to …

I’ve looked through the manual and can’t find them. Is there a list somewhere of accepted Ground Crew voice commands for the Dash 8 Q400?

Hello, I have a similar problem to the one posted in May - upon takeoff in the Voice mode, I get the transition to takeoff roll, I declare check power and that is confirmed by the Co. After that, nothing happens (no v1 callout, no positive climb) and the co doesn't react to gears up unless I manually change the mode to climb mode in FS2Crew. Thanks for your help Adrian

Hi, I am geeting random V1 and acceleration altitude callout in v5. I've set the speed and DA bug in PFD. The v1 usually comes below 80 knots and acceleration altitude is right after lift off. Is there anything I am missing? Thanks.

Using a new computer, and trying to get the voice activation to work. I've tried everything in the troubleshooting guide. I'm using Windows 10, FSX:SE, the most recent versions of the Dash 8 and FS2Crew. Using a headset which isn't detected by FS2 Crew. When I press voice it the green bar says it activated and when I try and call for a checklist nothing happens, no green bar, no response from the FO. Any help will be greatly appreciated.

Good morning Yesterday Windows 10 did an update to Build 19041. Since then, when I click the 'Voice' button on F2SCrew, P3D 4.5 stops responding and I have to 'end task' with the Task Manager. I've uninstalled and reinstalled FS2Crew but no difference... P3D still freezes up. I purchased the "MAJESTIC DASH 8 Q400 SPECIAL BUNDLE PACK - P3D 64 BIT" on January 3rd from SimMarket. Any suggestions welcome and much appreciated... flying without my FO is lonely! Keith

Just a small thing but, as many times as I have tried, I have only managed to get the Pm to start the engines once in all my tries no matter how nicely I ask, Are there any specific conditions required to make this work?

Working with the Tutorial included with FS2Crew - and I have the latest update. When I test the TO Warning - it is not silent. Seems like I remember a trick to have the A/C ready for takeoff, but have been unable to recall it. Any ideas? Franklin Duncan

Hi, could you please tell me what triggers the activation of the TOGA button by the first officer when i start the before start checklist. Regards.

In the manual it's listed that one of the things you can say is "You have control". What exactly does this do if anything?

I always wondered what exactly does this mean. What confuses me that both, CPT and FO both say "Clear on two". If it's about engines, why are they both talking about number two? I'd expect FO to say "Clear on one". Or is it about something completely different? Or FO just confirms what I say?

I cannot get FS2Crew to respond to my called when flying a missed approach. I run P3Dv4,5 under Windows 10 and from the FS2Crew manual I have gleaned the following proceedure: GO AROUND PROCEDURES 1.Adv. thr., Press GA 2.FS2Crew: BEFORE LANDING MISSED APPR, CHECK POWER, FLAPS 10 (15) 3.FO: POSITIVE RATE GEAR UP 4.400 AGL SEL HGD SEL (SEL NAV), SEL ALT SEL 5.Accel. alt. …

I have a problem understanding instructions in the manual. To create Soft Mute for example, we have to create joystick assignment for PROPELLER SYNC (ON/OFF). The confusing part is that the instruction for Secondary Button is to also create joystick assignment for PROPELLER SYNC (ON/OFF). The same thing with Hard Mute and Main Button. The same assignments for two different functions? Is this how it should be?

hello,no matter what I do the acceleration height does not work. I set the altitude to 1000ft AGL with the MDA Knob. But the FO says Acceleration Height at 100-200 ft. It makes no difference whether Linda is on or off. Mfg Klaus

Hi. I already bought FS2Crew Majestic Dash 8 for FSX and P3D. Now I'm using P3D version 4.5. Have I to buy FS2Crew for MJQ it again? Thank you. Raffaele

Hi, I have started having a problem with fs2crew for the q400. When I announce check power the response power checked is given but it is then silent. No vspeed calls or positive rate, the gear up command has no effect and there is no acceleration altitude callout . Can anyone help please i have run out of ideas. I am not using LINDA. Regards Mike

Hello, Hope I can get some help here with my Q400 w/ FS2Crew. I always have major issues with the words "ON" & "OFF" it just doesn't detect it, I always have to use "Set & Checked". It always detects "Alt" for several more phrases too. The other more major problem is when on final approaching and trying to do the Before Landing Checklist, words always seem to trigger the After Landing Checklist, it ruins the whole flight, literally. It starts to move a bunch of things including the control locks and feathers an engine. Like it thinks i'm on the ground. Is there any way to avoid this? Like having the After Landing Checklist strictly only activate whe…

Hi i have bought the Q400 FS2C , read that is problem with Linda , is it ok to not run Linda when fly the MJC Q400? Have done a Fsuipc macro file for the Q400 , is that OK no problem with voice. I can run Linda with MCE but i prefer FS2Crew. My eng is bad , here is a pic of my simpit i have a OC 737 MCP in backgrund that i use with NGX , 777 , 747 and FS2Crew, in fourgrund is a generic selfbuild AP( Q400 look alike) Bondar card with encoders and buttons, its mounted on a strong magnet i put away when fly the Boeings. https://www.dropbox.com/s/smvhwjn2bwggeuh/20190908_121004.jpg?dl=0

Hi, I recently bought the Dash 8 64 bit bundle version 3.3. In the manual several of the pictures in the second half of the document are missing starting on page 33 onwards. Is there anywhere I can download just the PDF. I also agree with previous comments that as this is a purely 64 bit application it would be better and nicer if the manual referred to P3D not FSX. I spent some time trying to close the Main Panel as the manual does not state that the panel must be unlocked (LK button) to close it. Finally the Config Manager main page shows that I have the Bundle version 3.3 but if I select the update button it states I have version 3.2 and suggests …

Hi, Big fan of FS2Crew here. I own the PMDG 737 and 747, Aerosoft Airbus, Maddog versions and just a few days ago I bought the Dash 8 version. Despite of knowing the intricacies of FS2Crew and its configuration, I am struggling with some weird issues: 1. The most annoying one is that the Flight Attendant don't stop calling me from some point during cockpit preparation until the end of the flight. Every couple of minutes I here "Hello", but I have never called her / pressed the CALL button. I order anything just to get rid of her, it is delivered and moments after I hear "hello" again during for the entire duration of the flight. My guess is that it starts during…

Hello Guys I'm having problems to find how to properly setup the anti ice system for a proper level 1 and level 2 configurations. I did the tutorial flight and a couple more and i have most of the thing on this new baby of mine. Also, I've been searching and reading but I couldn't find anything that tell me how to setup the switches. Basically I setup the anti ice, the way I thought it was, but when the moment of the checklist comes, the FO answers "Are you sure?" after I said Level 1 for the anti ice. Clearly I'm missing something. Thanks for any help!!

Hi there. Pround owner of Dash 8 version - finally bought it today !!! Now, before I install it, I thought I'd have a refresher as I haven't flown the Dash 8 for a while. So, thinking it would be a good idea to try setting up from Cold and Dark, I checked the Cold and Dark option in the config panel and reloaded the plane - NO COLD and DARK !!! ??? I have the Pro version, but do not understand why they would have the option if it is not working. However, this is clearly not really your problem, but how will FS2Crew deal with this ? If, and when, I eventually install and start FS2Crew, will it auto set everything to Cold a…