Voice Control Version

Hi, I updated my P3D version to v2.5 the other day and reinstalled FS2CREW voice for the A320. The I added the 'C' key to autofeather, but FS2CREW does not come to live. I deinstalled and reinstalled but to no avail. Please help

Hi Bryan, I've been searching nearly every day this past week to resolve my issue with the Aerosoft A320 Extended but no luck. Today I uninstalled all about the Airbus including FS2crew (locked version) and purchased both the A318-319 and the A320-321. I installed both and still having the same trouble. First my configuration : - W7 Ultimate and voice is working perfectly (afterwards disabled so that it can not startup when booting) - FSX (SP2 installed) no FSX SE - latest FSUIPC - UAC disabled and no antivirus installed (it's a PC only for FS) - installed and started all software with admin rights - modified the panel.cfg as noted on the forum - after un…

Hi Bryon The FO voice normally (and logically) comes from the right. When wearing a good quality set of over ear headset to excludes the possibility of also listening to the other person one must obey (the wife). I mean having one earpiece off the ear to listen to the 'outside' world. If I have the right earpiece off my ear I can't hear the FO and when I have the left earpiece off I can't use the microphone. Would it be possible to have the option to have the FO in the left ear so allowing the headset to be reversed? Another option would be to allow all FS2Crew sound to be switched to mono. There are no Windows controls to do this. I said normally the FO …

To help me use the correct voice commands and calls I produced my own consolidated voice command aide-mémoire and checklist. I would like to share it with other users. I have the 4 A4 pages laminated back-to-back (2 sheets) and always have them to hand. All the checklists are on one side and all the inflight instructions (ie. autopilot, speed, heading, height, etc) are on another. The pilot (that's you) needs to speak the red text.

Hey FS2Crew team, I'm a very happy user of your products for the NGX, the 777 and now the Airbus. Today I noticed that the F/O doesn't change the above/in/below setting of the TCAS. Maybe it isn't in the Airbus SOP's but it feels like the F/O actually should do this. There is also no hint in the manual. Can you tell me wheter the F/O or the C/P? I also noticed that my F/O never sets the crono on on takeoff ... Edit: I didn't notice that the chrono is the captains task ...

I cannot get FS2crew (voice activated) to load. I downloaded today from FS2crew account. (twice I might add). Still no joy. Both A318/10 and A320/21 installed and registered. Never happened before. Activated registry fix - still no joy. Any suggestions Thanks

I am usng FS2Crew p/b only. Unfortunatelly it happens often that the tail gets pushed to the left even so I have it configured to the right. Actually it has never been the other way around. This is espcially annoying when flying online as I create trouble for the ground controller. Thanks Peter

Hi guys, for the last 2 days I have been having problems when using the Airbus A319X in conjuction with FS2Crew Voice Control Version, after calling out the landing check-list on final I hear a Windows themed error sound on the background of P3D 2.4, if I come to the desktop there are no dialogue windows open but the error sound persists regardless. After having a look at the windows event viewer I found out the following Application Error, as it has got something to do with speech DLL I would like to know if this could be related to the FS2Crew application and if anyone could be of help on sorting this issue out. - <Event xmlns="http://schemas.microsoft.co…

Hi folks Wondered if there was a way to integrate GSX into fs2crew to allow boarding and ground connection push etc to be in line with the timing of fs2crew. Thanks.

Hi Bryan, You may know that I have used your products on every AC on my system for years now. I have never had an issue that hasn't been fixed and however, I have an issue now that I am reluctant to post but it has become annoying. The FO constantly says "Checked" for no reason at all. If there is ANY background noise on an open mic, I get a unrequested response of "Checked" This did not happen before I installed the latest update. Now I have to mute my mike between my responses to keep him for saying the dreaded "Checked". Now while I appreciate his diligence, it is time to say enough. So, I am posting to see if anyone else is having this issue and to se…

I was flying a very good approach profile in the new Aerosoft Airbus A320 using FS2Crew voice command to change altitude, heading and speed. At 3000ft with the height step set to 1000, I called 'Set Altitude 2500' in order to capture the Glideslope. The FO's setting of the altitude was all over the place including negative altitudes. I have to Cancel Last Command to regain control. I wonder if the STEP setting on the FCU was taken into account by FS2Crew. There is no separate command for the 100/1000 step switch behind the ALT knob.

During the Cockpit Preps the FO sliding table is extended. However, there is no way to stow it using the mouse as you can with the Captain's table. This function is not implemented in the Airbus VC cockpit so the table remains extended throughout flight. Lvars are available to open and close both tables so I will be adding these to LINDA module.

Having just started to learn and use FS2Crew with the new Aerosoft Airbus', I am wondering why many of the voice commands use the definite article 'the' (eg. 'set THE landing lights on'). In normal and aviation english, this is unnecessarily verbose. These recognised commands should be changed to accept phases/instructions without the 'THE'.

Using the voice command to Track ("set track 270") the FCU changed to TRK/FPA mode with a track of 270deg. However, when I gave any of the heading commands (ie. "set heading xxx" or "pull heading xxx"), the FO only read back 270 without first setting HDG/VVS mode. I had to manually set HDG/VVS to get back control. This is a fault in the control/moding logic. I was flying the new Aerosoft A319.

Hi Bryan, First of all let me say thank you for having supplied us with the new version for the A318/19 within no time and at no costs :smile: Much appreciated! I was wondering if you might be able to have the F/O turn on the brightness for the ND weather/terrain overlay, though. During preflight, the F/O turns on all the displays, but does not rotate the outer ring of the ND brightness knob. I guess this wasn't even operational in the AXE, but with the introduction of the weather radar and terrain display it now needs to be turned on as well. This would be excellent! Thanks and best regards, Stefan

Gents, i´ve done a short "Flow" for the phantastic FS2Crew Voice Version together with the phantatsic Airbus A320 X This is Version 1.0 of the PF/PNF flow and my first attempt to do such a list So please be patient if you find any bugs, and let me know for correcting it. Because Bryan did a such a great Job writing this piece of excellence, this flow will be enhanced, as I have some more time. Have fun!!

Have just downloaded from completed orders as directed but before installing I checked version details and saw it said Version 2.0.0.44. Is this 2.2 please? Martin Madden

Hello Bryan In my voice control the co-pilot doesn't set my transponder to on even if I have set the ASDE-X button to Yes. It is only set to TA when I call "Cabin crew seats for take off". This has always happened and isn't a new issue for me. I have ignored it up to now but I'm not sure if it's a fault or normal. Must it be set to yes before I activate the RUN PF button or simply before I get to the Before Taxi CL? Either way it doesn't seem to work for me Can you advise please? Thanks W7 64bit P3D v2.4 ASN for P3D

Hi. On the Before Takeoff checklist to the line the PNF calls for "Takeoff memo", when you reply "no blue" the answer always is "are you sure about that?", when the ECAM clearly shows no blue.

Hello, I have just downloaded the latest file from the Aerosoft Site ... the installer still can't find the host Installation altough it is installed in c:\FSX\SimObjects\Airplanes Regards

Hello I have just installed Aerosoft's latest version of the A32X series on P3D. The planes are working fine but when I tried reinstalling v2 of Voice Control I received the message; Error! The Aerosoft Airbus X host aircraft does not appear to be installed! Please ensure... Can you assist? Thanks Andrew Sorry. Just downloaded v2.2. Fixed.

Hi I just purchased new Airbus X A318/319 (v.1.10) and Fs2Crew (v.2.00) for that. After installation of Airbus I tried to install Fs2Crew with no success. I have a error message that I have not Airbus X installed and cannot continue. What can be a problem for that? -Henri

When I set the MDA e.g. 1750 feet and go through the approach checklist, the PNF is not responding; funny enough if I say 200 feet set the PNF responds with the correct MDA 1750 feet in this case. I think this happens with all 4 digit numbers. Thanks Peter

Hi I did all the thing required for the speech recognition stated in the manual but after loading p3D2.4, when I say for example Before start Procedure, nothing happens it is like there is no co pilot at all. So this is what I did : * set to 8.0 ........US * train your computer to better understand you * set the FS2Crew voice control in the Aerosoft configurator * disable UAC * start speech recognition after loading p3DV2 then I launch the main panel. at this point everything works fine, but when I start to talk, nothing happens. I use a corsair headset with an integrated sound car (USB). CMB Well Did another try and it seems to work, d…

I'm using the checklists my airline uses in the real world, so I don't use the FS2Crew checklists. However it is impossible to do a turnaorund without doing the parking checklist in FS2Crew. If I click on the button to start the preflight for the next flight the counter does not open and therefore no preflightevents are available.