Voice Control Version

Airbus X FAQs and Troubleshooting Question: I'm using P3D V3 and the FS2Crew panels are black. Answer: You don't have the latest version of the aircraft. Download the V1.31 or later update for the Airbus aircraft itself from the Aerosoft Update Database. http://support.aerosoft.com/ Question: I don't have a clue what to do! Answer: Read the 'CAPTAIN'S FLOW' section in the manual. We made the Captain's Flow section in the manual like an all-in-one tutorial for rookies. It coves a lot more than just basic flow items. It walks you through an entire flight and tells you exactly what to do. Question: Somet…

Gentlemen, The long wait is over! FS2Crew "Voice Control" for the Aerosoft Airbus X has finally landed! Click here to visit the Sales Page! This is our best FS2Crew ever and it is worth the wait! If you liked the PMDG 737 NGX version of FS2Crew, then you'll love the Airbus version as well! If you've always wanted a realistic Airbus flight crew simulation, then this is it! RELEASE NOTES: 1. The product works in FSX and P3D (Installer supports both options). 2. You need to own the Aerosoft Airbus X (formally known as Extended). This is the latest airbus released by Aerosoft. If you don't own the Airbus, it's available at Aerosoft. …

Attention FS2Crew Airbus Drivers, Thought you might like these new forum signature banners! They conform to the Avsim signature size limits. You can use them on any forum. SIGNATURE 1: DIRECT LINK: http://www.fs2crew.com/banners/Banner_FS2Crew_Bus1.png SIGNATURE 2: DIRECT LINK: http://www.fs2crew.com/banners/Banner_FS2Crew_Bus2.png SIGNATURE 3: DIRECT LINK: http://www.fs2crew.com/banners/Banner_FS2Crew_Bus3.png SIGNATURE 4: DIRECT LINK: http://www.fs2crew.com/banners/Banner_FS2Crew_Bus4.png SIGNATURE 5: DIRECT LINK: http://www.fs2crew.com/banners/Banner_FS2Crew_Bus5.png S…

Hi, I know i have a common problem but unfortunately cannot solve it. I have installed 3 times a330 without antivirus. I added n letter as you suggested but the control panel didn't appeared. I am using p3dv4.5 . Can you help please ? Attila Barat

Is this option possible? If yes then how could it be used together? How should I configure? Thank you 😄

When I call the ground crew in Airbus Prof. with the words "cockpit to ground" I don't get the answer "go ahead". My voice is being heard and is on the green bar and when I say "please disconnect external power" the ground crew reacts to my request. I did a reinstall but it did not change anything. Best regards, Hans

Hello Gentz; I am currently spending sometime exploring with FS2 Crew and the A330 by it self with the AES-MDCU Regular CL completely deactivated and from the get go I am already having problems with the 1st CL (Before Start CL to the Line) third item (Sings) which IAW the Manual the response would be "ON/AUTO" However, the Co-pilot response its "OK Approach its Armed" and activates the approach botton. I commanded to "Restart the Checklist", I get a good response. Then I will restart again the CL and the same happens at the same item and I have tried to use the command "Set&Check" and no response to continue. I have even try to just voice "T&Check" which for…

Hello, I would like to know why when pressing the N button the fs2crew window is appearing perfectly and why one it appears I can't close it? what ever I do it does not close but when closing P3DV4.5. Although when calling for the virtual manager it works perfectly, the briefing also, but not the main fs2crew window, either using the N button or the click spot. I have only the aerosoft 330 installed, not the A320 family from aerosoft Thanks for input. Cyrille

I've used both button control and voice control. With button control, the software adheres to the "Captain/Pilot Flying Flow" perfectly. No issues at all. With the voice control version, not so much. First issue: Before Start Procedures are listed to be run before Before Start Checklist to the Line. They cannot be run until after. The software starts in "B. Start to Line" mode and does not switch to <B Start Proc> until the checklist has been run. As I said, in the button control version, this is not an issue...everything goes in the correct order. Second issue: Ground does not respond to me, making the startup procedures impossible to complete. Spe…

Hey guys, I have a minor issue with the FS2Crew panel that only occurs with the Airbus version. If I reload the airplane from a scenario file (ie. I saved the last place I parked it...), the FS2Crew window appears at half it's normal size. Is there any way to fix this? (Apart from the obvious "don't load from a scenario file".) No other version of FS2Crew seems to have this problem. I reload my PMDG airplanes from saved scenarios all the time without issue. It's obviously not a major issue, but I do like to pick my airplanes up exactly where I left them, and in the same configuration. I haven't been able to do this with the Airbus family, sadly. …

Hello everyone, I recently purchased FS2Crew Airbus tools on Steam as I have FSX: SE. I purchased everything on that platform and tried to use FS2Crew but I get that error. Somehow (and I didn't know how) I managed to make it work for a couple of times but after that no chance. I read on the internet where to copy that DLL file in the windows system32 or sysWOW64. I tried to copy them there but with no results. I am running Windows 10 latest update. Matteo Bezzu

Hi Byork, My latest voice edition works OK with Aerosoft Pro airbus and also with FSLabs airbus, altough i am a bit confused how to use GSX etc... Presume from cold and dark at the gate at LFMN: we let the pre-flight time run, OK, FO does external and comes back, etc... Best way is not to set anything in GSX menu ? as FS2crew system will activate all GSX phases ( boarding - catering - fuel - jetway). Just contact ground service for pushback as in the FSCrew manual ? gsx pushback will follow automatically then ? Is there some manual or YT movie about interaction between GSX and FS2Crew voice for all these services as: pushback - catering - fuel.…

Hi, I have been having some issues when using voice control with the A330. Mostly minor. Yesterday I was using the UK2 voice set, and today I was using the DE voice set, both in the same A330. Yesterday I did not use the pre flight events, today I did use the pre flight events. I noticed the same issues on both occasions. First, there is no contact with ground crew. I receive the initial contact from ground crew, but they do not respond again when I have replied with "Go Ahead". They also do not respond at all if I call them, so I can not ask them to do anything like remove ground equipment. I have UGCX installed, but I had not activated it prior …

An issue with FS2crew with the A330. I give my F/O the command to turn on the APU. He switches something and replies "set" but he does not turn on the APU. I have checked with the green bar and my command is being recognised. Cheers,

Hi, I have just recently changed my Gaming PC to a higher capacity one and started to reinstall all application for my Sim PD3v4.5. For the past couple of days I have being running and testing the Sim on the new PC with all vehicles PMDG & Airbus vehicles and was doing fine until today. Today an FSDT msg pop up on the screen that an Update was available to download and after downloading it now none of the FS2 Crew Application sound or panel so far for both PMDG 777 and Aerosoft Airbuses are not functioning correct. One error msg popped out with the following (FS2AUDIO.DLL Failed to Load with Error Code 0x7e). I am afraid that the same deficiency will take place with F…

Good evening: I've just installed Aerosoft's A318/319 for FSX SE. I also installed the FS2Crew Locked product bundled with it. When I use Aerosoft's configurator and try to set up FS2Crew I get the message: 'FS2Crew Voice Control does not appear to be installed for the Airbus X A320/321.' I did purchase and install this aircraft through Steam and uninstalled it via that platform before installing the A318/319. When I first saw this message I then found a folder for the A320/321in my FSX SE menu in the DLC folder. I deleted that then uninstalled the Aerosoft product and the FS2Crew. Finally after re-installing both products I then re-started the PC with the same resul…

Hi, i have the FS2 crew for my Aerosoft Airbus Professional on p3dv4. It's great but there is one thing i would like to do, I prefer the Cabin crew sounds that Aerosoft provide and not the Fs2crew ones, however FS2crew seems to disable it in the MCDU options and i have to keep manually turning it back on but sometimes i forget to do it. Is there a way to stop FS2crew from disabling it on start up? Thanks.

Since the last update of Airbus pro. When I proceed commands on flaps, like flaps 1 in climb procedure. Or proceed the after star procedures or call for flaps on the approach. FS2CREW set flaps full. Also doors open the front right door instead of the left back door. please check this we need an update.

Hi, I am using Aerosoft A320/321 in FSX which runs on Steam platform. I have just installed Fs2Crew. Everything looks OK but when i select VIEW--INSTRUMENT PANEL---MAIN PANAEL or any Fs2Crew Panel, it only displays in BALCK and does not show any content. Please help. Thanks

On my past couple of flights (which have required wiper use), I've noticed an apparent bug with the "set wipers to ___" command - they seem to work OK, but the wiper setting knobs (on the overhead panel) seem to get pegged into the far right (clockwise) position, and no amount of left-clicking them turns them back counterclockwise towards off - only a fast scroll of the middle mouse wheel seems to free them. I don't recall noticing this before, so I'm suspecting there may have been some change in the 1.2.2.x update pushed out by Aerosoft?

Hi,in the approach brief there is a setting for A.Brakes which I gather is set from the MCDU. Where in the MCDU do you set the A.Brake setting. Thank you for a Great Product. navyman51

Hello, When using pushback feature, it never ends. After saying "BRAKES RELEASED", I am cleared to start engines.. I execute, both engines are started. As pushback is still ongoing, I say "STOP PUSHBACK" and nothing happens. The green bar displays only "stop". Is there another way to stop the pushback? Thanks.

Hi, I hope you can help me with this. Voice control works fine for me as long as I start the flight at any airport. But when I load a saved flight with the Aerosoft Bus Pro and activate Voice control during the flight, all speach sounds are gone, just the clicking sounds works. Voice control is doing everything I want: I can give orders or work off a checklist or do a briefing but without any sounds coming from the PM or from the captain. with fsipanel: I bought fsipanel yesterday to do some training approaches. The first flight went well and voice controll did its work, also during the second flight. But at the third I had the same Sound Problems as descri…

Hi, after one of the last updates for the Aerosoft Airbus Professional the button for the oxygen Crew supply in the Overhead Panel is switched off in Cold and dark mode. Aerosoft says it's standard when C&D is loaded and will adjust their Bus checklist: http://forum.aerosoft.com/index.php?/topic/140182-crew-oxygen-enbale-manually-with-copilot/&tab=comments#comment-906716 Is there any oxygen test planned for voice control or any other way the copilot will turn on the crew supply button? Best wishes Ludwig

Hello all, I am really desperate... I would be grateful for any help: I know this topic is not really new, but all the latest fixes / problem descriptions did not help / fit to the observed issue I am having: I am using latest steam fsx version + steam airbus a320/321 addon + steam fs2crew: description of the problem: when changing in the aerosoft airbus configurator: 1. to FS2Crew Button control: --> FSCrew button control main panel opens and works perfectly fine (using suggested Key assignment to "autofeather") 2. to FS2Crew voice control: --> the key assignment to "autofeather" does not work anymore --> op…