The Multi-Crew Experience (MCE) Support Forum

I upgraded to the new version 2.8.6.0. When I start it with P3d running I get windows opening setting up audio in windows, the main loading screen. Then along the top left and right wording in red. Program says its looking for the plane. Then on the right the P3d ATC window opens and closes. The MCE loading screen keeps display waiting for the copilot to get on board and nothing happens. I have uninstalled and reinstalled several times. I have reset the config file and started from scratch. Nothing works. Help. Doug

So soon (19th Jan) Asobo will get the Aerosoft Twotter. Now the question is, will Aerosoft recreate our Twotter? A lovely aircraft! Below is my 5 year old video. Now compare this with the release (when it happens) No doubt MCE will be there to cover it, as its a well known aircraft! ( I assume?) But after the debacle of the CRJ, which could not follow a ILS or a RNav LNav route properly (which Aerosoft wouldnt acknowledge, yet my install was aweful...hence I abandinded it...who really cared, Aerosoft DIDNT!) Anyway, there is light at the end of the runway if the Twotter is good? We may yet have a 75% authentic aircraft in MSFS! I pe…

I really enjoy the MCE interface and have mastered most of the ATC commands using NATIVE ATC in MSFS 2020. However, I have some issues with the ATC command 'Cleared to (ILS, VOR, VOR DME, etc) runway (xx) approach..." command. Basically, I only have so many chances to get it right before I'm too close and use the 'option one' command. I'm trying to figure out how I can set up MSFS 2020 to practice this ATC command over and over so that I get it right without the need to reload the flight from the beginning and completely fly the entire flight. I'm hoping for some suggestions...

Hi Gerald, i´am writing these words down, because i can´t believe MCE will not be the same as it was before the PF3 major update this year. Before the PF3 Team provided it´s last major update MCE+PF3 worked perfectly together for me. But after the update this is not the case anymore. Well, after several small hotfixes by PF3 and MCE it´s better, but there are still some major issues. 1. the most anoying issue is the ATC call by FO seems not been "heard" by PF3. This happens on almost every flight at least once. It doesn´t matter at which phase of flight, though it happens with departure, Centers and Approach. Sometimes it takes 2nd contact by FO after "Tra…

Anone using P3d V5+? How do you find it? I am on P3d V4.5 and its got 100% functionality. GSX2, Chaseplane...etc! Just wondering what 5....+ gives us? I ask because I am starved of high quality, aircraft in MSFS...Ya know? INOP INOP INOP? LOL! Thanks!

Good afternoon! I added a more generic topic, to limit the amount of topics to start. Hope that is OK. First off a big thanks to mr. Herky for the massive amount of procedures he already created for A320, which makes achhieving my goal a lot easier! I came acros those by accident while reading in this forum. Here is a link for those searching: https://library.avsim.net/search.php?SearchTerm=msfs+neo&CatID=root&Go=Search Problem: The official Preliminary Cockpit Preparation procedure starts with Master 1,2...........Off. I have tried many things, but could not find if a command for this does exist or not and if it does, what the command would be…

Hello, I am not sure if I am mixing things up with something else, but for some reason I believe, that in some MCE file I was reading that you can handle the flying to FO. Phrases sit in my head like "you have controls" or "you fly the aircraft". I scrolled through all command files and associated PMDG 737 NGX files (I fly mostly it now in P3D4), but can't find it anymore. Only that you can handle the radios to him. So is this my imagination because I've seen it somewhere else or MCE has such a function? If so could someone please remind me in which file I could read about that? Regards, Viktor.

Festive greetings! Just a quick question - I know the LES Saab isn't fully integrated, however I thought it should still set/retract flaps, retract the gear, etc.. but for some reason it does not. I created a 'ref' file but admit I'm unsure what to name it. Could you give me some pointers please? Thanks, James

Yesterday, i ran the update to PF3 V3.13.0. Right after that MCE doesn´t connect to PF3 anymore or it´s disconnecting after first contact with delivery. In MCE in the ATC Tab it says "PF3 not connected" After a restart of PF3 and MCE and after loading and connecting the FP again to P3D, the FP is connected to MCE, but if the FO reqest ATC clearance from Delivery the transmission by the FO is interrupted immediatly and the FP is lost in MCE. Do we need an update of the FSInsider or something?

Hi, unfortunately I have huge problems with the checklist for the 737 NGXu. Example given... _____________________________________________________________________________ PREFLIGHT [ ] Oxygen -- Tested [ ] Navigation transfer and display switches -- NORMAL [ ] display switches -- AUTO [ ] Window heat -- ON [ ] Pressurization mode selector -- AUTO [ ] Flight instruments -- checked [ ] Parking brake -- on [ ] Engine start levers -- CUTOFF It is nearly impossible to just answer "Normal" for "Navigation trans…

Hi, I used to download latest versions from the download page of the main site, but it appears the links are gone now. I own both Xplane and P3D/MSFS versions, how do I get to a download link now please? Regards, James

Exceptional deal (10 bucks all products) for a few hours only: https://www.captainsim.com/store/ Multi Crew Experience has them almost all covered. As a registeed MCE user, you can expect a co-pilot and flight engineer to assist you with their. 777, 767, 757, 737, 727, 707, 727, L1011 Tristar the whole fleet. across MSFS, Prepar3D and FSX and FS9

Hi, I have downloaded MCE yesterday for use with the NGXu under Prepar3d v5.3 and was wondering if the following is possible. First of all I do not want the FO to flip any switches, press buttons or do any other cockpit interactions since I want to do all that stuff on my hardware by myself. So im mainly looking for other things in MCE. Which of the following is possible and what would be the best way to do it? - Call Flight Attendants to start GSX Boarding process including playing own(?) boarding music. - Communicate with Ground Crew to initiate pushback via GSX. How do I tell him to use the GSX pushback e.g. with Nose to the left? - Have …

I've found that for some reason the F/O uses FMC one (Captain) to make his inputs even though I've programmed FMC two to be used in the scripts. The strange thing is that when I test scripts by clicking the button or test individual commands within the scripts, he uses his side's FMC (two) as he should. But when I set myself up like I normally do at the gate to do a normal flight he always uses FMC one despite what the scripts say. Any idea what is causing this? Another thing is the 60 kts callout during rollout occurs right after the F/O's confirmation that the reversers are normal when I'm still at around 130 kts. The "one thousand to go" callout also only works du…

Hi, I just started using MCE with the 737NGXu and P3Dv5.3 and already read through many manuals and watched some youtube windows. Understanding all of them I have some points left which I cannot get to work, but where I'm sure they should work! 1) I would like to do all actions in the cockpit on my own. However I want the copilot to say what I'm doing. E.g. I switch the Autobrake to RTO and I want to have the co pilot say "Autobrake set to RTO". I have "Call-Outs and monitoring" ticked and I have gone successfully through the checklists together with the FO until engine start. But whatever I do in the cockpit the copilot is saying nothing on my actions. No comm…

Did anyone see this 7 Years ago! LOL! No? and where were you? How about a flight engineer? What? whats that? Look it up! MCE can do this.....AS part of your flows! Oh yes, a third crew member on the flight deck! Operating all the relevant switches! Now think about a Concord Simulation???? Need a Flight Engineer on that Baby? OH Yea! Ohhh! 😉

Hi Lads Just a quick question.. I have latest MCE version 3.9.4 I think it is, and the latest GSX version running P3D 5.2, I've never had an issue when using MCE or GSX (by button), but Now I'm trying to get it working with MCE. If I say - Cockpit to Ground, I get "How can I help, what do you need" etc along those lines, but If I say "Start Boarding, Board Passengers etc" I get no response. I have a PTT button set on my yoke, which works perfectly when talking to ATC, no PTT to talk to Clive / FO, and GSX works with no PTT Am I missing ssomething? I've looked in the MCE guide for AES / GSX and tried just about every command but nothing happens

here is a flight in the Dash 8. You can not do this in MSFS after over a year! Why? Whats wrong? Why is MSFS so behind? I merely ask?

HI everyone, Its been a while since I have posted on here, I'm just getting back into flying again. I have just updated my dash to the latest version and also to the latest version of MCE. What I am finding is when I am using flows and my CO us working on different panels the view in the sim (P3Dv4.5) changes to that panel, so if I am looking at the centre pedestal and he does the fire test the view jumps to the overhead panel, after a while this causes the sim to crash as I am fighting with him to control the views. IS this normal or can I turn that function off so he does his stuff without the views changing? Regards Rob

The X-Plane version is not working well with SSG's newest Boeing 747-8. Several commands are not supported. So the flows aren't working too.

Hello pilots, Not so long ago, I have discovered such an amazing thing as MCE, that has brought up my flight experience to a higher level. So happy that I purchased it! But as many of us here, I am also sometimes having issues with it. I am flying CRJ700 in MSFS with PF3 and obviously MCE. I've set up PF3 and MCE to work together as per manuals and they do most of the things right. I want to practice some ATC talking, so I do some requests and read backs while on the ground and hand off radios to FO before take off, that I could concentrate on flying. And he handles all communications better, than I would do. However, the most recent issue th…

Hi. This may be contrary to what MCE is all about but I mostly fly GA aircraft and would like to control ATC and the radios myself. What do I have to do in the MSFS settings and MCE to make this work? You will gather I am very new to MCE. Thank you for any advice.

Hi to all, first of all: thanks again for this great piece of software :-) It brings a lot of variety and immersion to flight sim ! Actually I use p3dv4.2 witch MCE and PF3 - and all works fine as expected. Until now I was using the internal voices as Copilot... Yesterday I used an internal Windows TTS voice (ZELDA) ! Almost everything works well, flows, checklists, ATC contact.... ...BUT If TTS-voice is replying and confirming an ATC (PF3) command, The language is very choppy with many breaks between the words and digits !? Example: ATC:....fly heading 270 climb to 5000.... TTS-VOICE(Auto Replay): ....roger (Pause) climb (Pause) to (Pause) 5 (Pau…

I am using MCE Lite with FS9 and will likely purchase the FS2020 version but I would like this problem solved first please. I run FS9 followed by MCE Lite which work OK together well. I also want to run PF3 but get these error messages. I run PF3, load the same flight plan as for FS9 and MCE Lite (one of the tutorials) Press "Connect to FS" on PF3 and get this message - "IPC request contains bad data. Check FSUIPC Version (2.80 or later required)" Press OK "Problem connecting to Flight Sim or Flight Sim/FSUIPC not running." Press OK Run FSUIPC from its folder and see "There is a copy of FSUIPC already running. This process will now exit" So, what am I…

Hi, I owned MCE long before MSFS 2020 was released, and it worked great with FSX, but now I own MSFS 2020 and FBW A320 NX, and my MCE is not connect with the Aircraft am using version 2.8.79. Do I need to up grade or re-purchase MCE?