LINDA Support

Hi Andrew the Course knop turn direction is twisted function PMDG_GLSD_MCP_AP_CRSL_inc () ipc.control(PMDG_EVT, 37607) ipc.sleep(20) PMDG_GLSD_MCP_AP_CRSL_show () end You have to change the PMDG_EVT, 37607 into 37308 and the 37308 into 37607 Didn't test it with the CRSR knob

hello, i have LINDA v3.3.4 installed, and i use P3Dv5.3 on a Windows 11 system. whatever i try, i can't get the Vrinsight MCP to work. when i scan with the program 'vrinsight.exe' it tells me that the device i found on COM3, and during the scan, i see movement on the MCP, and the lights lit up for a second witch tell me that the MCP is installed correct. however, when i start P3D, nothing happend. i see no error message in LINDA, and the com3 is selected, and offcourse MCP is enabled. i try to downgrade to version 3_2_6_1111, but no results. i try the UTF-8 trick as mentioned in this forum, but no results. what seems to be the problem? i do see errors …

Hi there i have MCP combo 2 running on MSFS PMDG 737 all the commands and rotaries work the only thing is the displays all sync but when i change the speed heading alt etc it does not show up on the displays it shows in the sim and works perfectly just does not show the change on the MCP. Any help would be great i must be doing something wrong im not that clever with things like this you guys all seem super smart even just to get this working like this. I have the latest version of fsuipc 7 paid full version and linda along with the latest msfs2020. I run windows 11 fully updated I have tried to start it the order provided and I am still not gett…

MCP 1, SPD HDG ALT knob, setup 'press': f.i. LVL CHG, HDG SEL, ALTHLD (or f.i. mode change) does not work? no effect

Hey erveryone, I have for a few days problem with my Vrinsight Combo Boeing II and the Linda Software. My PC had an update for my USB-Ports on the Mainboard few days ago. After the update and the Linda Software: LINDA_3_3_4_1360 The Linda Software found my Combo panel not any more! I re-install FSUIPC 6 and the Lindo software didn´t solve my problem. Only the downgrade to Version: LINDA_3_2_6_1111 Fix the Problem, that Linda find my Combo Panel. So, if I want to fly... I start the Linda Software and after my P3D. I select the PMDG 777 and load a Flight. When I sitting in the Cockpit... I res. a information-text: Linda is ready: After that: …

Hi, maybe it´s possible to show the trim in the mcp2 Display? Stefan

Hey together, Wuhu Pmdg 737 is out. I know its very early, but iam sure some of u just started testing to get the McP Combo Panel running. I have the McP1 Combo Panel and tryed my old Templates, no Luck. With Fsuipc i can get some Rotarys like the HDG, SPD, ALT Knob working, but the displays still not Synced. In Linda the only thing that works is the Radio Part. I know that Scot wont do a new Module for the PMDG 737, but maybe some of u had more luck than me and get the thing running. Please let us know, if someone of u get the things running and could share the Template and Modules. I actually use this template, The Display is now Synced, but no…

Hi, I have tried several options but am at lost so any help appreciated. So I have a registed version of FSCUIP and have downloaded both the current versions of FSCUIP and Linda. When I open Linda it indicates that everything is ok and when I check the VRI tab is states that its all and found ok. I let MSFS boot up and wait until I am in the cockpit of my PMDG 737 before anything else (I have downloaded the PMDG module for Linda). I will then click connect for FSCUIP and press connect to sim, I then get an error message which states Linda not synced to Flt Sim I then check the CRI tab in Linda and it now states FSCUIP7.ini SOmething is wrong, also …

I could map most all commands to my TM TCM Quadrant without a problem, except for TCAS's TARA / TA / XPDR / OFF / STBY. Whenever I mapped this commands to rotary knobs or switches. FSUIPC would be then terminated after I saved the settings and tested the functions

My VRInsight MCP Combo & FSUIPC, SPD HDG ALT Lights etc works with MS default Beech Baron, Bredok 737, 747, 787 etc but nothing moving (ALT SPD HDG) with the PMDG 737? In FSuipc ini: [VRInsight] 1=COM3 MCP=COM3 FSuipc Log show no errors at startup 94 VRI port 1 "COM3" opened 1656 VRI FMER ("MCP Combi") detected on port COM3 18875 User Aircraft ID not supplied -- trying default (??????) 19390 Aircraft="PMDG 737-700BDSF FedEx OE-IWE" LINDA log shows no errors at startup With PMDG 737 on runway turning ALT HDG SPD knobs of MPC COMBO fsuipc.log appears: 185969 *** LUA Error: K:\FSUIPC7\linda/libs/lib-msfs-extra.lua:143: attempt to con…

I just start working with LINDA with my VRInsight combo and I must say that working with LINDA is great, not difficult at all. Is it possible to also work with other (self made) panels and, for example, a FMC in combination with hardware like an Arduino? Or is it restricted to the VRInsight products?

I've tried mapping the autobrake functions (RTO, off, 1, 2, 3) to switches and haven't been able to get them to work in sim. Gear up also seems to map the gear handle to off rather than up.

Hi, FSUIPC is killed after seconds. There seems to be a problem in the action.lua. here the last entry in the FSUIPC7.log 20656 LUA.4: [START] file_exists linda/system/init.lua 20938 LUA: "C:\Users\MSFS2020\Documents\FSUIPC7\linda/system/init.lua": killed 38031 *** LUA Error: ...cuments\FSUIPC7\linda/aircrafts/PMDG 737/actions.lua:3640: attempt to call global 'PMDG_LOGO_off' (a nil value) any advice for me? THX.

Hello, I am having trouble getting my MCP-II Boeing MCP to LCD display anything using even just the default MSFS2020 aircraft profile. Relevant info: Linda version 4.1.4a (tried a "reinstall" of the file structure) FUSIPC version 7 (tried an uninstall and reinstall. It is installed directly on my main drive eg. C:\FSUIPC7 I confirmed my com port using VRi.exe and used the automatic setup function to add the relevant lines to the fsuipc ini file (and checked manually its there) Linda Configuration checklist says Everything is OK Linda is set to run in admin mode for windows I have tried reloading the LUA engine whilst in cockpit. I am able to click …

Hi all, I've got the MCP Combo and I've had a problem since I got it with the knobs jumping values...especially when making small adjustments. Sometimes it's 5-10 digits...sometimes more. I decided to take a look at FSUIPC to see what commands the knob was sending. Using the HDG knob as an example, I found that it was sending 16 and 17...mostly 17 but when I made small adjustments it would, sort of, alternate. Clearly, my goal is to have it stop jumping around. But I'm wondering if this could have something to do with it. BTW, this is the second board I've had. The first did the same thing exactly. It's a new machine with both USB2 and 3 slots...I've tried …

Hi Andrew, 1. Downloaded Linda 4.1.4 2. Installed Maddogx via LInda UI 3. Leonardo MaddogX(orange) in LINDA Not sure how to do the 'IMPORTANT INFORMATION FOR VRINSIGHT USERS' about assigning DSPmode functions to switch between INFO and AP. How.where do you do that? Thanks Clive

Hello, I am unfortunately having major problems getting the VRInsight MCP Panel Version 1 Boing Style to work with the latest LINDA 4.1.4.281a and the FBW A320. My problem is that the LCD displays on the MCP panel and in the Airbus do not match. The speed with which the SPD display in the sim counts up or down is much too slow when I adjust the values on the VRInsight panel. The values are not synchronized, so they do not match after the first turn of a knob. The only value that is synchronized is ALT. But also here the speed of changing the values in the sim is very slow. But at least the values are synchronized. I will send the logfiles by mail, but maybe this hel…

Hope you can help. LINDA was working fine as I was getting to know it. Maybe I've caused this, but when I want to view the console I see it shows as open on the task bar but when I hover down there with the mouse I see a blank page and I cannot anyway get it to appear maximised next to the main LINDA page as normal. It did work before. I am using FSX Steam and the latest LINDA version for that with FSUIPC4. It's probably something basic but I can't see how to sort it out, so any further info needed, please ask. Thanks.

Hello, I am windows 11 user from two months ago and I have problems with VRInsght Combo 2 with some rotary buttons: ALT, HDG, Radios. VS and Rotary from EFIS no has problem. When turn the rotary for example to up, the value goes up and down and is impossible to set any value. LINDA 3.3.4, FSIPC 6 bought, P3Dv5 HF2 Any idea? Thanks and best regards

Hello, I would really appreciate some assistance getting LINDA up and running. I recently purchased a Bravo Throttle Quadrant and am hoping to set it up in the FBW A320. I have the most recent version of LINDA downloaded as well as the most recent version of FSUIPC7. This is my installation folder: https://imgur.com/1aWrHxc I moved the files from the LINDA folder into the FSUIPC7 root folder. I believe I followed the directions properly, but I may have made a mistake. When I have LINDA open while FSUIPC7 is running, I get this warning that FSUIPC files are not found: https://imgur.com/v7iKCPy When I click the "action required" button, I get taken…

Hello there, I recently got the Honeycomb Bravo and I have problems with the throttles in den Leonardo MD-82. Obviously there are several options with the Linda Module for the reversers but they don't work for me. I would be very glad if somebody could outline how to set up the throttles correctly for the reversers to work. Thanks Adrian

Sorry if this is a bit long; I hope you have the patience to read it. I’m about to put my foot in the waters of Linda (if that’s mixing of metaphors, well…). I’ve been footling around with FS (FSX for good reasons), Air Manager and FSUIPC4 for a year or so and eventually choosing a main-to-be-used aircraft (Carenado Saab 340B) and want to add a couple of panels which I’m in the process of making using great advice from Mark Hurst’s super little book. LINDA’s Grandad (Brian) tells us to plan ahead and guess what, I find I’m in a Catch 22 situation. I find myself trying to plan what the panels (and therefore LINDA) will do, but increasingly find I suspect I m…

I have had several reports from users that say LINDA is no longer working. A LUA error occurs which stops LINDA dead. Checking the FSUIPC7.log shows: 17485 *** LUA Error: error loading module 'linda-cfg/system/config-sys' from file 'D:\FSUIPC7\linda-cfg/system/config-sys.lua': D:\FSUIPC7\linda-cfg/system/config-sys.lua:1: unexpected symbol near 'Ô' The problem occurs when LUA tries to read the config-sys.lua file and is usually caused by the Windows Regional/Language settings being set to a language other than English and not using the UTF-8 encoding. There is a UTF-8 Beta check box that should be ticked. See YouTube. The problem is also been experien…

Hi Andrew, hi Joe, with the latest build of the experimental, the function regarding managed and selected Alt gives a error in line 175 of the action.lua. Seems, they change a variable. is there a solution for this? 19263125 *** LUA Error: C:\FSUIPC7\linda/aircrafts/FBW A320/actions.lua:175: attempt to perform arithmetic on global 'EvtPtr' (a nil value) 19448938 *** LUA Error: C:\FSUIPC7\linda/aircrafts/FBW A320/actions.lua:168: attempt to perform arithmetic on global 'EvtPtr' (a nil value)

Many thanks for the Linda Module for the FBW320 !!! But it seems that the landing light dont' illuminate the ground. The Switches moves to the right position, using ver 1.0.2 Taxi and other light works great