LINDA Support

Hello I am sending the information as I am having problems connecting to MCP2. 1 LINDA 3.3.4.1360 2 FSLABS A320 3 p3d v4.5 4 FSLABSv5.0.1.126 5 Connect to com3 6 FSUIPC:Something is wrong 1 [VRINSIGHT] not found 2 X=com3 found ok 3 not set action required *********

Hello dear friends, first of all, let me introduce myself. I am Spanish and I have been building an MD80 cockpit for Leonardo MADDOGX for a few years. Simulation is my hobby and aviation is my profession. At the moment I am trying to make the connections between the simulator and the Output indicator lights. I am using the following elements: PREPAR 3D5V + MADDOG X + FSUIPC6 + MOBIFLIGHT……….and LINDA 3 . 3 . 5 Download LINDA with the intention of being able to trace the scripts and actions that the simulator performs. Worse when I try to select ( setup LINDA ---- developer mode ---- and finally LINDA TRACER) The following message appears in the cons…

Dear Everyone, Hope you are doing well. I've a issue with Linda, as is not saving the the keys that I set at the system, however... looking at the files everything looks okay. I've the lastest version of Linda, FSUIPC also the lastet version and I'm testing with the A320 FlyByWire, lastest version too. In P3D this never had happened to me. If you can bring me some info at the end of the this tunnel, I'll be so happy. Kind Regards Roberto

A beta module has been released for the newly released Fenix A320 to run under MSFS 2020. Users should be aware that due to decisions by Fenix not all FCU data is accessible. The result is that functions are provided for all VRInsight MCP Combo 2 buttons and knobs but it has not been possible to display the Speed, Heading, Altitude or Vertical Speed data on the panel. Also it has not been possible to animate the knob push and pull. Users are requested to report any comments or faults under this thread. Enjoy.

I have installed the DC-6 module, and I'm having problems with the aircraft specific functions. The dc-6 is detected and synced by LINDA. I've noticed that all of the default FSX controls that I've assigned in the fsx default profile show up as Black instead of the slightly grayed out green that is typical in the aircraft specific modules (even though I have not assigned them individually in the DC-6 profile itself). Some of those functions that are assigned to the default fsx profile appear to work on the DC-6, however none of the specific DC-6 functions seem to work (for example landing lights extend or retract). As far as I can tell all of the other modules I have ins…

Sorry, 9 days ago I had this working well and was so impressed, then I went on Holiday. I returned today and tried a quick flight, EGPH-EGBB, brilliant, then I thought, I know, Now I've got the FCU working, I'll lower everything (it rests on an MDF shelf with an X Touch Mini) I also thought I should move my SAITEK radio panel. Big mistake, after unplugging USB cables etc I did a bit of woodwork and plugged it all in. Sadly it no longer works. Initially on starting Linda, I had a message about 4 unknown USB devices. I have Saitek Rafio Panel, TCA throttle and Sidestick and rudder pedals. I ensured nothing was checked as enabled and pressed save. Us…

I use MSFS2020 +Linda V.4.1.5 +FSUIPC7+VRinsight MCP2 Combo Boeing+Saitek switch Panel+Saitek Throttle.I assign button in Linda but it not happen after I saved and reload .And when restart Linda command button in setting page is not appear it blank.How can I fix it?

I have the VRinsifht combo and I just updated LINDA to version 4.1.5. Als the knobs and buttons work fine, just not the display. It shows "Chk Lvar". The HDG, ALT and V/S display doesn't work on the combo. Any idea how to fix this? (PMDG B737, latest version 3.0.25, MSFS2020) Thanks, EDIT: My bad, I quit and restarted LINDA again, waited 30 seconds and now it all works again. Thanks! Jaap.

Just want to say a big thanks for the work you do. My Fenix A320 is now working with the VrInsight FCU for Airbus

Hi, I'm a newbee here, just got the VRInsight combo and installed everything according to the instructions on this forum. (MSFS2020 and the new PMDG 737-700). I got everything to work, all buttons and knobs work but the screen on the VRInsight does not work. No matter what I try. It does load the right plane but all values are on 0000 or -----. Any suggestions on how to fix this? Thanks! Jaap.

Hi! I'm an old Linda user (MCP Combo original with PMDG737 on FSX). Now i'm tryng on MSFS, but i have a problem : the VRisim sfw find the device, the test is ok; in the Fsuipc.ini i have 1=Com3 and 2=Com4 anf the other in fsuipc.ini settings ; after load MSFS, i wait 2 minutes, then launch Fsuipc7 (registered version), then Linda; the configuration checklist is ok (everything is ok!); i have speed, hdg and alt displayed on MCP and working fine, but nothing happens on PMDG cockpit...please, help me!! Tnks in advance

Hi, I have Linda 4.1.5.289 and FSUIPC 7.7.3 installed, and everything shows green and sync'd to sim. But Linda does not control anything in the aircraft. I started Linda well after starting the flight. Do I need to edit fsuipc.ini as described in the topic in the download forum? And if so, do I also need the WASM module for FSUIPC? Or should it also work without the edit and something else is missing? Regards Boris

Hi, Somebody please help. I simply can't get the FSUIPC/LINDA combination to work with neither FBW A320 or Fenix A320. Even the simplest binding of a switch to e.g. Beacon ON does not work. I have the latest version of both FSUIPC (7.3.6) and LINDA (4_1_5_289). FSUIPC.INI and FSUIPC_WASM.ini are modified as described in the LINDA downloads section. Also latest LINDA aircraft modules are installed. The fsuipc-lvar-module is in the Community folder. I am starting MSFS, LINDA & FSUIPC in the sequence also described here with LvarScanDelay=60 (FSUIPC_WASM.INI), as well as the other additions to FSUIPC.INI. In P3D is was a peace of cake - I kn…

Hello, I own the MCP combo VRinsight 1, I have no problem with FSX and P3D but I can't get it to work perfectly with FS 2020. I have installed the last version of FSUIPC and Linda, I sart FS2020, FSUIPC and Linda, I made the recommended changes in the fsuipc.ini file, When I load the plane (with PMDG 737 et Airbus Fenix or default plane, I can change with the rotary knob the heading, speed and altitude for a few second but then it doesn't work. In the console admin, it offers to me to roll back to an earlier version, where can I get it ? Thank you for your help.

Is there a way to make the CRS knobs work on my VRInsight Combo? Thanks, Jaap.

Hi Andrew, I missed a "Both LDG Lights on" and "Both LDG Lights Of"f function Can you add this in the next Update function PMDG_OVHD_EXTLTS_LAND_BOTH_On () PMDG_OVHD_EXTLTS_LAND_L_on() PMDG_OVHD_EXTLTS_LAND_R_on() end function PMDG_OVHD_EXTLTS_LAND_BOTH_Off () PMDG_OVHD_EXTLTS_LAND_L_off() PMDG_OVHD_EXTLTS_LAND_R_off() end And please have a look at the LDG-Light Installation Options. There is also a 3 Way switch (On, Pulse, Off) possible. The LDG-Light function in V0.5 don't work with this option.

Hello, Please may I get some help with a V/S display issue? With the setup listed below, I am seeing the VRI MCP Combo II (in A/P display mode) not follow the selected V/S if the V/S is negative. P3D, the VRI MCP2 and the PMDG aircraft track V/S together fine (when in V/S mode) if the V/S value is positive. If its negative the VRI display just shows zero. LINDA 3.3.5.1363 P3D 5.3.17.28160 PMDG NGXu 737-800 BCF FSUIPC 6.1.8 VRI MCP Boeing Combo II version 1.100 Scenario: CMD-A engaged, SPD mode engaged, level flight, then select a lower ALT, press V/S mode, turn V/S knob anti-clockwise. PMDG displayed V/S on the glareshield goes negative as expect…

Hey all im up and running cdu2 installed Linda and com activated now what, is there a setup guide am i supposed to pop out the instrument window resize etc. Any advise or where i can find, i googled so much and cant find one person setting it up Thank you

Hello, I would like to know if anyone knows how to program the hdg, ias and altitude selector in the thrustmaster throttles. I would like to use them with the pmdg 737 ngxu so that selecting ias and turning the small selector sets the cruising altitude, while placing the large selector on hdg turning the small selector sets the landing altitude. In practice, having a different function of the smaller central selector depending on the position set on the large selector. Thank you

I am having a major problem using the hot key to get the LINDA screen to 'pop up' when running MSFS. I did see somewhere that this could be problematic but I have tried various key combinations and some work for a while (lots of repeats) but when I re-launch the FS the hotkey doesn't work. I can see that in the cfg file for example the code is 32843 when I try to use Alt+K and this changes to 49227 when I try to use Ctl+Alt+K. Any suggestions will be appreciated. (Incidentally the Alt+F for FSUIPC7 works flawlessly.)

I had no problems with MSFS default aircraft and my Vrinsight M Panel, but with the new PDMG B737 it doesnt work. Is there any solution ? Thanks

Hello Pilots. Before, with my MFSX I used the Saitek panels and pedals and with LINDA and FSUIPC I could configure all the buttons and levers and other functionalities. I would like to know, if now with these new developments, I can use my SAITEK panels and levers with the MSFS2020 and PMDG 737-700? Thanks and best regards.

I have a great working MCPCombo-II with Linda/FSUIPC on MSFS2020. Using PMDG 737-700 I have a display-error. The knobs are working when looking in my cockpit. But that issue for now is ok. Now using the great new FENIX 320. Starting FSUIPC+Linda, after 1-2 minutes the software seems to start ok. On the display of the Combo everything looks great till the last seconds.. Then the display becomes rubbish (like with the 737) but that's for now. The screens of Linda-software don't give any errors. Now my problem ! There is no connection between the Combo and the Fenix 320. Not any reaction turning knobw in the cockpit. I do have connections …

Hello, is there a work around to find installed aircraft when MSFS is installed in a different location then default. Brian

hello, good morning, I was wondering if someone who knows how to program events with fsuipc and linda, could create a basic tutorial, for clumsy people, to show how some buttons or rotary are coded, we would have something to start with. not all of us are computer engineers and we would like to be able to use fsuipc and linda well, thanks