Voice Control Version

Hi All, I'm trying to get back into the J41 and wanted to fly a couple of times without the FS2CREW running to remind myself what the FO is doing - to that end are there any full checklists that show both the Captain and FO flows as part of the FS2CREW checklist? If anyone could help that'd be grand! Regards,

When I am using fs2crew NGX version, I really like the "hard mute" because the vatsim. So.. Is there this "hard mute" in js4100 version also?

Hi guys, I know you recently updated to 2.2. Thanks for that amazing. However, some suggestions I would love to see if there is an update. 1. Parking brake stays on during cold and dark checklist 2. The GPU is removed after engine stable left , by the FO. 3. Conformation of v speeds during taxi and the speed 4. Flight planning tool. Something very basic that will generate random payloads 5. Final approach fix call - on approach 6. FO - calls cabin be seated 7. Lights , continuing and runway call. I know the runway on sight call is there but the others 2 would be good Can we have an emergency pack like the one for ngx for js41?

Hi, Is there any reason why all the panels for fs2crew are blacked out on the 2.2 update? It works fine after fresh install , patch applied black boxes!

An informal poll here...How many of you are regularly using the free FS Video Marshaller that ships with FS2Crew Jetstream?Cheers,

I seem to remember that there was an ini-file for the Main Panel button setup somewhere but I cannot find it? :( I need the buttons 'initialised' for my need before start.

Bryan... I ended a Little confused after bought the J41 edition...I have v1.03 which I downloaded after bought, manual versión 1.02 and then finally install update to v2.2 from the updates at the web... Did I miss something??? Just in case you need it.. order #32059 Thanks!!!

Good afternoon, After installing update V2.2 for the J41 Jetstream(voice control version), i don't hear the crew & cabin voices anymore. My voice is clearly received since the green text in the top screen shows exactly what I'm saying. When I press the run pf button in the cfgmanager the aircraft is set to the cold and dark status. So what do i wrong here? your assistance is very welcome! Kind regards, Frans van der Meij

Hi guys, I wonder if any of you is flying online on IVAO/VATSIM in the J41. If so, how do you "soft mute" FS2Crew while talking to ATC? I understand that the SM button is assigned to "Propeller Sync on/off", and I doubt that it's a good idea to turn Prop Sync on and off whenever speaking to the controller... Any ideas? Thanks, Stefan

Hi Bryan Love your product and have been using it for both JS4100 and NGX. I'm starting to use sweet fx and notice that whenever I'm speaking, the text of the speech shows up onscreen. When it does this, it seems to toggle the sweet fx settings on/off. For this reason, I'm wondering if there is a way to disable the text from speech onscreen? Thanks, Alex

hello I just reinstall my fsx.. and I can't install fs2crew voice I try 7/8 time but nothing appears in panel.cfg. I of course do FSX registry intégrity a lot of time, but no change I reinstall PMDG jet stream but no change , I also re downlaod fs2crew what can I do i use window7 ultimate 64bit thank for your help

hello AT FIRST I supposed that have correctly do the key in fsx but when I pressed on button of my joystick nothing appear ! ??? I do exactly what is write on the manual , the to thing in FSX GENERAL COMMAND. ps: have French FSX SECOND I have see on vidéo youtube that there are announcement , I have none , just in, checklist Flight attendant advised that all. thank for you help Wasp

Hi Bryan! After nearly 2 years pause I came back to the J41 just to find out a major FS2Crew update has been released. Good timing I'm now running V2.1 of the voice control version. I have a small issue with the F/O voice volume levels. I fly with headset, and that's selected in the main FS2Crew menu. I've increased the F/O volume all the way to 10.0 and it's still kinda' low for my liking. The J41 is noisy plane, and even though I've lowered the engines sound from the FSX menu to about 30% I sill struggle to hear the F/O sometimes. Is there a way to go higher than the 10 mark? I'm running the NGX voice and I have no issues there. Thanks.

Hi Guys, I am sure there is no offical support for P3d and this product. However, i wanted to know if anyone in the community got it working. I am in the process of moving over to P3D and it is the last product that i cannot get to work. For people that are intrested; i have seen a massive improvment in performance when moving over to P3D.

Hi, usually I get close to a 100% FO's correct response or reaction. Only with the above mentioned phrase nothing happens. I checked and I am in the roll out phase and below 60mph. I use the European crew. Thanks for the help Peter

Hello! I am using for first time any FS2Crew and must say that if at the beginning all is complicated, at the end is a pleasure fly with it! Even all is scripted. Anyway.. I am having a problem during the Taxi checklist. I say (have the voice one) "Taxi check" and the FO starts the check with an "standby" ok.. all good: FO: "FA prepare for departure" he says.. but when is supposed to say the first line of the checklist he says: "Start locks" and there he stays. I already released the start locks before and the FO called. Even I did that when he said in this situation again.. but nothing. Not continue. Any idea? By the way... how to announce to t…

Hi, up to 3 days ago everything was working fine. But now I do not hear any cabin announcement. I did not change anything,. Thanks for the help Peter Problem solved, somehow I did turn down the volume.

Hi Im currently setting up the Js41 (and 737) for extended vatsim use and have noticed there is no radio command? I just want to be sure Im not missing it

HI Guys, Brand new to FSX,PMDG J41 and FS2crew so apologies if these problems have been mentioned before.I have had FSX crash four times at same point whilst trying to get my head round FS2crew,everytime I start programming the FMS and as soon as I press VNAV button FSX crashes,it has only done this with FS2crew installed,no problems with FMS before,any ideas?Using windows XP by the way, Thanks

I have been using the NGX for quite some time now and neglected the JS41 which is a shame because its a fantastic aeroplane. Anyway I can't remember if the "Set Power" function was working before during takeoff. I have all the Departure Check flows complete and turn on ALL the external lights, then call "Cleared for takeoff" and my FO selects the Condition Levers to 'Flight'. Then when lined up I raise my Saitek X52 throttle to the 12 o/c position and call "Set Power" - he responds with "Power Set" but doesn't actually set the correct Torque figure I selected, which is normally 98%. After saying "Set Power" I always follow through with the X52 throttle but the a…

Hi Bryan does the voice version work in prepar3d Cheers Roy

Hi all! I'm trying to properly set up the voice control version of FS2crew of the J41 but I don't seem to be able to assign a joystick button to the soft mute function. I should point out that I am a long time user of the FS2crew voice version for the NGX and never had a problem. I assigned various keys through fsuipc to a joystick button and assigned the same key to the soft mute function but no success. Number one when I open the FS2crew config manager the soft mute assignement is always blank (even if I choose the save and close option) and I've tried several keys both in the pre loaded ones in the scroll down list of the config manager and assigning new ones…

I am a long time user of JS41 FS2Crew and know the operation fairly well. However I have just bought a new computer and trying to install FS2Crew. Installation went ok but I can't find the Configuration Manager ?? to select the high or normal panel resolutions etc. If I click on the Configuration Manager item in the All Programs - FS2Crew folder I get the Window with the picture of the Easy Fly JS41 on it where you can select the Manual or Website etc. Where do I find the Configuration Manager :blush: Glen

Hello Bryan, I had the button version on my hd. After installed the voice version (great program) it seems my button version has completely disappeared ! What's wrong ? Best Regards, Richard Portier

Hello, Another product that i've bought from the voice series. What a beauty!! Now my problem, I follow the comnplete flows en everything is working. Only after starting the left engine i can't start the right via fs2crew because my copilot is saying that the EGT is to high. He is right about that, after start my EGT is 461 but it needs to be below 200. Whatever i try to do, it is not getting lower. Are there any options left to do or is it a bug? Kindly regards, Rick Winkelman