Voice Control Version

Dear FS2Crew PMDG J41 users: 24 April 2013 Version 2.2 is ready for Download! Download link: http://fs2crew.com/cart/Updates/FS2CrewJetstreamV2.zip VERY IMPORTANT: VERSION 2.2 IS "NOT" BUILT INTO THE FS2CREW JETSTREAM MAIN INSTALLER! YOU WILL NEED TO INSTALL THIS UPDATE EVERY TIME YOU INSTALL OR RE-INSTALL FS2CREW FOR THE J41. The Update 2.2 Installer includes options to install either the Button or Voice Control 2.2 Update for FS2Crew J41. To install the Voice Control version update, you must have the Voice Control version of FS2Crew J41 pre-installed. To install the Button Control version update, you must have the Button Co…

Avsim just published a great new review of FS2Crew for the PMDG Jetstream!http://www.avsim.com/pages/0910/FS2Crew/J41.htmlCheers,

Please, I have a question: is FS2Crew PMDG J41 Voice Commander Editior for FSX compatible with Windows 10 64 Bits ?? Thank you very much!!!

Hello! I know, the Jetstream and its fs2crew are now quite old and for me they work awesome together. But I just wanted to know if you plan any updates, voice packs or a ittle reboot version for it? I am just curious! Thanks

Hi, With the announcement that PMDG will be porting over a the JS41 to p3d (with a possible re-build) will you be looking to create a new p3d version of the voice control version? If so, can i apply to be a beta tester? If so, can yo inbox with with the application process? Thank you in advance.

Hi Bryan, Sorry me again!!!! LOL Since 2.2 the check list hold point on the dep check list now flows all they though. So before you would give the hold short and the check list would hold untill "cleared for takeoff" was spoken? Any change you could look at this? Also the "Abort Abort" does not work? Thanks

I'm really enjoying my flights lately, using VoxATC and FS2Crew. My problem is that I use my number 2 button on my joystick to push to talk with VoxATC. In order to avoid FS2Crew from reacting to anything I say while speaking VoxATC, I have to hit the hard mute button, because I have no way of assigning the same number 2 button to soft must. The idea is that if I push the number 2 button, I would like it to soft must FS2Crew while at the same time I'm actually speaking to VoxATC, and when I release the number 2 button, I would like to finish my transmission with VoxATC, and at the same time deactivate soft mute, so that I can continue to speak to my co-pilot. Is there any…

So it has taken me a few tries to "get" it, and I still need some practice, but WOW, what an awesome application this is! Well done, FS2Crew crew! The JS41 is one of the coolest addon aircraft out there, and this makes it even cooler. And thanks to Andreas, Pawel, and Richard for your very helpful flow and check docs!

How do you set decision height on a precision approach? On a non-precision approach - I am able to set the approach using the CFG popup and my mouse wheel. Yes I was under 14000 feet when I tried. Haven't flown the JS41 much lately. Love your products and the JS41. Franklin Duncan

Hi, I have installed the voice fs2 for the js41 and nothing is working. I've checked the reg with the tool supplied and it came up ok. I've checked the batteries and power are ok, deleted cfg and started again, made sure i have total admin rights still nothing, help me please!!

Hello, I was able to install the old version with no problems. After I run the 2.2 update the Voice FS2Crew No longer works. I made sure the batteries were on in the aircraft. I made sure I ran the config for the J41 again and looked at the Config, everything is where it should be. I even ran the update 2.2 as administrator. Still cannot get this to work. Am I missing something here? Any suggestions? This is really frustrating.

With the exception of the co-pilot reading back the wrong landing runway, this flight I made using FS2Crew along with VoxATC was flawless. Not sure why he said runway 21 when I said runway 04, or should I have said runway 4? Be warned, might bored you to death by watching this approach video. FYI, set view to 1080p for better dark view lol... https://youtu.be/UkEKJ3nqxQs

Hi, Version 2.2 (I suppose) Blue interface is open (1.0)> check for update> error message> unable to contact the server. With FsCrew 777: no problem to contact the server??? Thanks

Not sure what is going on. Nothing has changed with my headset or speaker settings but, when the cabin crew ask about permission to board, or I call for coffee or snacks, that all works well. However, for some reason my co-pilot begins his cockpit prep and all, but does not respond to any of my commands.

Hi There, I just purchased and installed FS2Crew for the PMDG J41. After making recommended changes outlined in the manual I started up FSX , loaded the Cessna on the runway and then tried to load the PMDG J41 but each time I suffer "Fatal Error" and FSX either restarts or quits. I have installed the latest version of DirectX. The only data from C:\Users\<---USER NAME--->\AppData\Roaming (if using Vista or Win 7) \FS2Crew2010\Versions\Jetstream\ Is in the folder Saved Data as follows: [FS2CrewData] Accent=0 Volume=3 USBDevice=0 AES=0 Doors=1 GateDep=1 GateArr=1 PbUnits=0 PbDist=4 Any assistance will be appreciated. Thanks. Ian Burston

Help. I can't figure out who does what. Who un feathers the prop so engines will not catch fire? Who sets FMS? If you do not run Pre - lights events than how do I activate the Fo? Is there so help from start to finish? Any help is much appreciated. Tim

Hi Brian, I know this has been asked ion the past, but with PMDG suggesting they are looking at revamping the JS41 for p3d 2.2. I wanted to know if you will be doing the same for your product? Also, would it be possible to look at the updated version 2.2. As the depature check list does not stop in flow after the hold short and completes though to takeoff can this be fixed?

Hi again,My new problem - I was fighting with this one yesterday. With FS2Crew installed, I cant seem to remove the stop latches. Either with FS2Crew running or not, I go through the startup guide listed in the PMDG forum but the latches wont budge. I end up burning up my engines... When I uninstall FS2Crew and JS41, then re-install JS41 the problem goes away and I am able to remove the stop latches. I installed/uninstalled 3 times yesterday to ensure that was the problem and confirmed it every time.Appreciate any help getting this sorted.Thanks,Mike

Why every time I'm going through the checklist, the FO either doesn't answer the first time, I have to repeat myself twice, and sometimes it answers for me what I'm suppose to response in the checklist which is in blue, or if he doesn't understand me for some reason he says, OKAY! It's kind of annoying at times, and it all began more so when I used the last update. Any ideas, suggestions would be helpful. Thanks...

I'm tired of flying around with male voices as co-pilots, and I found no where in the forums that address an update to include a female pilot in the J41. Can I add my own actors voices, and where are the sound sets in the folders?

hello, I don't undestand why but it donst work.!!! I did FSX registry intefrity test The panel is ok , of course the battery is open . what I mis , and what can'i do to get this blady hand ....... thank for your help jef

I just recently installed FS2crew for the J41. It works great and no problem with the installation. I do, however, now have a problem with other FSX aircraft ( the ones that came with FSX). The displays for the radios, auto pilot, etc., do not display any information. The switches and buttons for on/off, dialing up the various frequencies and auto pilot altitudes all work ok and their indicating lights come on. It's just that I have no displays on the items I just mentioned. It's hard to set altitude (for instance) on the auto pilot if you have no display in that window to indicate the height or ft. per minute you are trying to set. Other than that the other aircraft w…

Hi all!I would like to share my flow/checklist for the awesome Jetstream.Many thanks to Bryan for the wonderful FS2CREW voice add-on.I printed these two pages out and laminated it.So I got all I need in a handy format.The flow/checklist starts at "turn-flow/check".All possible voice commands (marked with orange) and the "missed-approach checklist" are included. Just start with the (green) flow followed by the associated (blue) check.If someone would like to get a PDF, just ask me, so I will put in on AVSIM.

Problem as title. When I click on the voice box on the main FS2Crew panel, it says 'on' briefly before disappearing again. I am using the UK English speech recognition software in Windows 8.1 and cannot switch to US English since there simply is no option for it. I wonder if this is causing the problem?

Hi, No sure if this is possible. But, I have noticed there is very little support for cabin crews. For example , at gate, ground crew. Push back, taxi, per take off , climb, cruise, decent, approach , tubulane etc etc . This would be really good and also customisable sound files so the community can support and customisable.