FS2CREW: LEVEL-D 767 (FSX Voice Control)

Service Pack 1 for FS2Crew: Level-D 767 'Voice Commander' Edition-Click here to download-Important Notes:1. This update is NOT built into the Main Installer. Everyone will need to install SP1 AFTER installing the Main FS2Crew 767 Voice Program.Change Log:1. Locking 'Check-Check' scenario identified and fixed.2. 'Wipers Off' voice command now works at any speed.

767 Captains,We have a new demo video showing what a typical flight using FS2Crew 767 Voice Commander looks like.Obviously we can't show everything, so the video is highly snipped in order to get a full flight down into about 4 minutes. A lot of the checklists shown, for example, are abridged, so do not use this video as a training video!Also, the file is heavily compressed to meet YouTube limits, so the audio and video aren't as good as they are in the actual product.But it gives you a sense of what the product looks like in action.The crew accent region is set to United States and the flight starts in KLAS.Remember that in the actual product you can also select from Eu…

767 Captains,I'm proud to announce that FS2Crew: Level-D 767 Voice Commander Edition has been released and is now available for download!This is an exciting product that adds a full "Voice Controlled" flight, cabin and ground crew to your Level-D 767.Standard Operating Procedures (SOPs) are derived from a UK based airline, however, I've made numerous changes to them to make things "easier" for our users.It works with both the FS9 and FSX versions of the LDS 767.It ships with three voices sets: -United States-United Kingdom-EurozoneWe use real-human voices, not computer generated synthetic voices as in my view human recorded voices will always sound 100 percent better tha…

Hi there, I am a very keen Level D 767 user. It still remains one of the best versions of this superb plane. My question is will this voice commander edition install into my Win 10 ( latest version ) 64 bit OS and the Steam edition of FSX ? My Level D is installed into the Steam version and is the 1.50 winglet version. It runs fine on Steam.

The great folks at Level-D have just released the 767 for P3D, and for FSX DX10. I wanted to know if FS2Crew2010 LDS767 would also work for P3D, or is that a whole different animal to tackle?

I started using the Level-D 767 with FS2Crew. The Problem is that the check issue appears every time I fly. I've reinstalled several time both the LVD-767 and FS2Crew with the SP1(I redownloaded it). But the issue still exists. It always happens after the "Set 60 Percent" command. The FO calls 80 knots and after takeoff FS2Crew only recognizes "Check". I also tried to deactivate/activate the Voice Button of FS2Crew several times without any result. I hope you can help me.

I am a long time FS2 customer and have many of these products however, this one I am going to have to put back in the box (figure of speech) I am afraid.I have a somewhat complex systems, multi servers etc and I guess too many programs running. I use FsP and I does not work well with this product. I have a CTD on every setup today and I have tried several times, systems errors seem to come in conflict with activities (which I limited) such as FsP.Anyway, back in the box, I am quite saddened :( by this. I love Bryan's work. But I fly a lot and the CTD just is not acceptable . . Thanks, wish someone had a clue what this might be.Joe

Hi Bryan I am using FS2crew voice for some years now and it worked fine, but in the last days something wired happened: When using the “SET HDG XXX”, “SET FL XXX” commands the numbers go on running. In general I know about this issue. it happened from time to time in the past and a solution is also mentioned in the manual (switch “voice” off and on again). But now it happens every time. Switching “Voice” off and on helps at first. The running stoppes, but with the next command it runs away again. Often I have to do it 3, 4 times till it works normally again and the numbers don’t run away anymore... Maybe not important but I recognized one thing: Normall…

I have fsx with leveld winglets aircraft. I had the push button fs2crew for years and working just fine. I upgraded to the voice commander and can't get it to work. If I start fsx with the new fs2crew configuration manager and select any of my leveld aircraft. I get a panel initiation failure pop up and fsx crashes. With many pop up windows flashing. I think they are the gauge approval windows on first install. They come up and go so fast that I can't read them. If I start fsx with the fsx.exe icon and choose any leveld aircraft, they load just fine. I only get one menu for the fs2crew, I guess it's the main one once I click in the alt gauge. Does not see my headset, U…

Hello there. I just watched the Demo Video and find that the "Before start checklist" "Before take off Checklist" and "approach Checklist" seems something "Old" As I know,based on some AFMs and QRHs from different Airliners and ages, Boeing and many Airliners changed their SOP at about 2005, for the entire Boeing fleet. One of the most obvious modification are the checklist was reformed. So the Checklist along with the SOP from the demo video is not the same as what I know, the new SOP is more like something FS2Crew using in 737NG.....anyway,I think you can get more information about this than I do. Since I also fly the IFLY 737NG, I do want the new SOP for 767 …

Hi, We currently have cabin crew seats for departure....' But we don't have seats for landing. Was that left out deliberately or was it z challenge to code that in..? Thanks Hari

Hi there. I've installed FS2 Crew LDS 767 and the update and even though It confirms the installation is successful I do not get any messages when starting up FSX (gauge etc(and this is after trying all of the below)). When in a flight after selecting the FS2 Crew panel in the LD menu, clicking the vertical speed indicator doesn't bring up the FS2 Crew menu. The only way i can do it is if I select it through the views menu and even then all the panels appear black. I have tried: deleting the FSX.CFG file, reinstalling visual C++ 2008 redistribute package reinstalling FS2crew several times using registry fix I have also tried following the manual to no avail. I…

First of all I want to thank you for a great product.There is however one problem I've been having with it, (as I've also kind of had with other versions of the non-voice controlled FS2Crew), namely the poor keyboard/joystick mapping functionality.When flying online (on either IVAO or VATSIM) you frequently talk to online ATC, and the need to connect the soft-mute functionality to the same button as Push-to-talk in FSInn or TeamSpeak arises.However the choices for what buttons you are actually able to map is very limited for some reason. And even worse, in this version I was not successful in getting a joystick button to work at all, nor the backspace key. Only key that w…

I have level 767 installed it works great but i have both installed then it crashes . Don craft

It's driving me crazy. Where/how do I activate the panel to bring up the departure and approach briefings? I have read the manual and just can't find it? Thanks! melcec

At least half of my flights have ended up with this issue at some point throughtout the trip. Exactly what the title says... Whenever I say absolutely anything, my F/O replies with "check".... the funny thing is that he also says it when I say "hello". This means that I can't carry on the flight anymore with FS2crew as I don't think there is a fix to it... I tried everything (even gone as far as disabling then re-enabling the mic and the voice recognition - still not resolved). I noticed there is another thread about this on this forum but there was never any resolution, and I've also heard many other people experiencing the same issue, so I was just wondering if …

Hi, I use fs2crew voice commander for level d 767 on fsx with fsdreamteam gsx. I want to use gsx push back, I have disbale push back required in fs2crew config menu but I still need to say disconnect to ground' to before I can get gsx to push back. Which doesn't sound right, is there anyway that step can be eliminated and I can continue calling push back via gsx menu ?. You have a great product, if it can interface with gsx better, it will be a great experience for flight simmers... Thank you.

Great product! Few questions though: 1. How do I turn on the PA Panel? I've tried to click on the PA button in the pedestal and around it and no luck. Any ideas? 2. Master Panel - how do I turn that on? When I put the mouse over the Captain's airspeed indicator a finger icon shows up, but when I click nothing happens? Any ideas? 3. FA/Cabin announcements. This has worked in the past, but since I reinstalled on new machine it doesn't work. I've tried to use the scroll with the mouse and it doesn't work. Again, any ideas? Love the product - have both the Wilco 737 and Level D. When I get the PMDG 737, I am def getting the FS2Crew version! All the best, …

When I contact the ground (external power, pushback, etc) while fs2crew is running, FSX crashes every time. Why is this? I searched the forum and didn't see anything unless I missed it. Joe

Good day! When I install the fs2crew voice again after i completely install the fs2004 again ... I recognize a serious problem. The FO ist not turning on the APU, Bleeds, Seatbealts etc. pp. when I´m on the Before Start Procedure or Runway Procedure. Even if I acclerate the aircraft on take off it says v1 and rotate at 60knots and other stupid things. Before that I did not have the Problem. I also install the SP1. My current version is the 1.5 Voice FS2Crew Level D. Greetings Dominik

Hi all, I'm having some problems that are probably very easy to fix but I can't find the answers.... 1) My FO voice is so low and muffled I have to turn off the FS sound, boost the FS2Crew FO volume to 10 just to make out what he's saying. If the engines are running I can't hear anything. It's like he's talking through a very big pillow. I've tried all 3 FOs, the USA, UK, and EUR and they all sound the same. 2) But ok, so I can mute the FS sounds and stumble my way through the preflight and even get off the ground. Here's where the big problems start, on wheels up.... a) The lower left EHSI never comes on. It just reads "Tcas fail" and does nothin…

Hello, I have a recently installed and fully updated version of FSX on Windows Vista Home Premium installed into it's default folder. I also have the LDS 767 for FSX with it's required updates and REX Essentials with it's updates. They all run perfectly. This morning I installed FS2Crew for the LDS767 Voice Commander Edition and it's SP1 update. I ensured that I waited until both installers completed, told me the product was installed, and the "Exit" button came up. I can start FSX, load up the LDS 767, and even import the FS2Crew panel state, but when I click on the VSI gaugue to start FS2Crew I instantly get a crash to desktop and Windows says the error i…

I was trying a flight today that started fine at the gate. Some of the timed interval call outs like fuel had shown up but no voice. I called before start checklist at the 8min interval and nothing. I hit pause and then all of a sudden all the delays came one after another. The FO asked windows and I said closed and locked. the green bar at the top of the screen showed the same but nothing happened. Just seconds ago I was typing this and the FO just called passenger signs. My FSX is paused so I have no clue what could be going on.

Hi Bryan, long time no hear from you ;-). I hope everything is running smoothly for you. Here is my problem: although I noticed another thread regarding the issue of the copilot always repeating "check" on every command, this thread was too old to reply to ;-). I have already downloaded SP1 but keep getting this problem. Is there any way to check that FS2CREW has indeed updated to SP1 and I have the correct files in place? Using Win7 btw. All the best, Benny

Hi everybody, I wanna ask for help. Last 2 months I have problem with my fs2crew voice commander in LevelD Boeing 767. After everyone checklist or every instruction during the flight copilot starts to repeat speed, speed, speed.......... Then, I can say any word, it stops. Have anyone had this or similar problem? Thanks for your answers.