FS2CREW: PMDG 737 (FS9), WILCO FEELTHERE 737 PIC AND DEFAULT 737 VOICE COMMANDER

HiSince installing SP1, the radio panel stays open after FS2crew uses it - both the radio and throttle gauges stay open during after landing flow. Any ideas? No probs before the SP.CheersRich

Hello, I am trying to start a flight using the FS2Crew Voice Edition for the PMDG 737. I have the 600-900 and all model updates. However, when I click the voice button in main panel, the "ON" light flashes and then goes right off. I cannot get this to stay on and therefore voice will not work. I do have a headset/mic plugged in and nothing is muted. Does anyone have any ideas? Thanks Matt Elston

Hi Please be aware of the following "issue" with these headphones...Logitech G35 Gaming HeadphonesAfter just purchasing these top quality headphones i could not get them to recognise my voice on the 2010 default 737 Voice Edition.An email to support followed and numerous emails concluding in a remote session by Bryan trying to sort it out.After much pulling of out of hair by Bryan ,without success, it was left to mess around with the settings of my headset.Then.....i realised these headphones have a VOICE MORPHING option which was set to ON!!!!!Strangeley FS2Crew could not recognise my voice as it sounded like a "Troll"After disabling this feature alls well so be warned i…

Hello Brian,I downloaded the sp1 for default 737 but when trying to install i get an error message saying something like "unable to install , be sure to install main program before installing sp" .Now I'm lost cause the main prog is installed and working ok.Any suggestions?Regards...Marc

Hope someone can help. I just got the PIC737 version (thanks Bryan) after using the 737 default version for a while. After starting FS2Crew I put the left aft fuel switch on and start the APU but it fails shortly after starting. If I don't start FS2Crew I can start the APU succesfully. Its probably something I'm doing wrong :( but I'd appreciate any ideas. Thanks Richard Cooke

Hi Bryan,thanks for the great enhancement of FS2Crew with the new speech recognition functionality. I have tested this with the 737 PIC but it seems I am still having some problems which are:1. Before Start Procedure: The FO does not switch on the Anti Collision light. The other items in that area are working fine. Instead of switching on the anti collision, the FS is switching into the "bird perspective" (which is normally done by the keystroke CTRL-S). Is that intended to happen?2. After Enginge Start Flow: The Taxi light is not switched on, the other items are done fine.3. "Takeoff": The Landing Lights are not switched on.I have already made my mini overhead panel bigg…

hi, i am trying to start fs2crew2010 without the preflight events, i click on the flap gauge and fs2crew starts but the f/o does not start his preflight procedure. do i still have to open up the configuration and click on start, i thought you only do this if you want to run the preflight events which i normally do but i would like skip the preflight events. thanks,jim

HiYesterday I purchased and downloaded FS2Crew 2010 and installed it onto my system. I have all the required add ons such as direct x and my speech recognition is set to US, the file is located in my default 737 panel .cfg and I have activated my account. However, when I start up FSX it doesn't see FS2Crew and there is no panel in the flaps indicator. Help !!! have I missed something or do I need to add something on??ThanksChris :(

hi, ive noticed speech recognition is having a problem with the word auto, alt hold is displayed in the green bar, also during takeoff after the pnf announces positive rate i call for gear up but he doesnt do this. i also dont hear the fo telling the fas to be seated for departure. slowly but surely im getting to grips with this program. thanks,jim

Hello, sorry for my terrible english. =)The problem is:Today i bought a FS2CREW 2010 for PMDG 737. I received only 3 mails: 1. Thanks for Registering...2. Your Order From The FS2Crew Online Store.3. Your Order Has Been UpdatedAs i know, i need a 4th mail with Activation Code. I've already send a message with this problem via fs2crew.comAlso, I have an confirmation of payment mail from PayPal if it needs. My order number is: 9883.Best regards.

Attention FS2Crew FS9 PMDG 737 Voice Commander Owners:These panel.cfg files are to be used with the FS9 PMDG 737 and FS2Crew2010: PMDG 737 Voice Commander Edition.If you experience any problems with your PMDG 737 after installing FS2Crew2010 Voice for the FS9 PMDG 737 (such as black panels, error messages, etc), then you probably have corrupted Panel.CFG files for your PMDG 737 (namely, your windows and gauges are probably out of sequence.)The solution:Manually copy the included panel.cfg files over your pre-existing PMDG 737 panel.cfg files. The FS9 PMDG 737 panel.cfg files are located here:<root FS9 folder>\Aircraft\Important: Your PMDG 737 must have ALL the lat…

Hi, after FS2CREW 2010 new 737PMDG version was installed, a C button stop works. This button is used to open a clock. Have any suggestion or others experience? Thks to all

HiCan you tell me if I am missing something? - the attendants seem to do their cabin checks/announcement at about 2400 ft just as I'm lining up for landing...the maddog seems to do this at about 10,000 ftBrian,just to say a big "Thankyou" for offering FS9 add-ons. Shame others don't do the same...FS9 is far from dead! Wish I could just say that it is just their loss....RegardsRich

hii just bought the FS2CREW 737PIC 2010 version and was wondering if the key code information was sent to the purchaser manually or by automatic means. I receive confirm of my order by paypal , got a good link for the file, but don't see any key message in my email. Was there something i maybe missed?

HiFirst of all I must say that the product is great, keep up the good work.Now to my problem.I can't get checklists to start. No metter what I do it's the same. Speech recognition is working because I can talk to the ground crew or start the engines but when I come to the checklist part nothing happens. For instance I say "preflight chacklist" and nothing. No FO starting the checklist. Does anyone have the same problem?Thanks in advanceAles

hi just installed windows 7 and now using alt to get the menu up in fs9 the screen goes black, a work around is to use fs9 in windowed mode anyone found a solution and will running in windowed mode have any adverse affects when i reinstall and use fs2crew 2010 thanks, jim

hi the manual reads that netframework 3.5 should be installed, i have just installed windows 7 but on the microsoft website download page for netframework 3.5 windows 7 os is not listed as compatible, so does windows 7 not require this. thanks, jim

Hi guys, yes, unfortunately for me does not work ... I have XP and the speech recognition (set to English) works. The voice training test is also ok. But my co-pilot still does not respond ... may perhaps be due to my poor English, anyway this is my question (hope): Is there any possibility in the future to have a version for Pic737 (FSX) without speech recognition?Thanks in advancePatrizio

Some great news!While beta testing the Maddog version, a user with an older system experienced a performance hit while running FS2Crew.The Maddog and the 737 versions share much of the same core code.Based on this testers detailed descriptions, I was able to identify a section of code that caused the performance loss.After modifying this section of code, his performance issues went away!!!!It was odd because I could never reproduce this on my machine, but after looking at that section of code I could see how it could happen.The updated code will be incorporated in SP1 for the 737s, which will be released shortly after I release the Maddog this weekend.Best,

Hi Bryan Just a couple of ideas for when you update the PIC 737 & PMDG 737 voice.1. Call clear the left, FO clear the right2. Call altimeter, FO says passing FL100 for 190 like you used in the Airbus Crew.3. Call You have control, FO I have control.Apart from missing these calls your product works perfect, well done Bryan :( , just one thing I would have liked is the PMDG version to work the same way as the PIC that is even with the auto pilot in the FO will still change the heading speed and altitude. Maybe I am being lazy but now I fly the PIC more than the PMDG. However love it, gives a new dimension to the game. Jo…

hi bryan, used fs2crew for the first time today and i think its great, cant get the f/o to start engine one on the pmdg, he acknowledges the instruction and opens the mini panel but i cant see a increase in the n2 i ask him to start engine 2 an he starts that ok, probably missed something any help please. jim

Hello Bryan,First, I want to thank you for your great piece of software, it has increased the level of reality to a whole new level.Now, I have a logitech G940 Flight System, and the problem I'm having is that all buttons assignment which I have done previously are lost. The interesting part, prior to FS2Crew 2010 installation, when I try to map an FS9 command to a button, it displays the value button 01, button 02, and so forth, but now the buttons on my G940 are being mapped to combination of commands something like shift+ctrl+v, for example.Any ideas why it is doing this?Thanks for your help.

Bryan with all due respect, removing the post about the performance leak and locking you last post is totally rude, especially for us paying costumers. im of the view that the forum was for us to post our pro's and con's about the product. This would be benefical not only for those who have bought this product but for prospective buyers. I guess you are trying damage control, however when we post our recommendations or what we have been trying to tweak on our machines to make this great add on to work, im sure that many of the readers are getting something good.Before I got into FS2crew I spent a good amount of time reading through the posts trying to make up my mind whe…

Hello,I fly too much with Vatsim. But it isn't possible the voice commander and Atc from Vatsim simultaneously to use! Is it able to 'mute' the speech recognition system on the fly using a push-to-hold key?Cuni

A FS2Crew user just posted this video showing the Fs9 PMDG 737 version... I believe the guy who made the video is Japanese.Cheers,