FS2CREW: PMDG 737 (FS9), WILCO FEELTHERE 737 PIC AND DEFAULT 737 VOICE COMMANDER

Hi All, I'm having good success with voice recognition, but I'm experiencing a possible bug. When I call "start engine one" the FO turns the engine start switch right to CONT. If I call again he turns it further to the right (FLT). I have to select GND with the mouse. When I call "start engine two" he turns that one correctly to the left (GND). Anybody else have this issue? Thank you, Greg D.

Is anyone using Radar Contact with the new Voice Commander? I understand that with a headset you can have the FS2Crew audio come thru the headphones and all of the other FSX sounds (engines, cockpit, rain, etc.) come thru the speakers. If you use Radar Contact, does the audio come thru the headset or speakers? It would obviously be more realistic if there was way to get the Radar Contact audio to come thru headset also.

:( rafman925 I'm running once again my PMDG in FS9 and the FMC continues to say ICAO code is not in the FMC, is there something I need to do to get the codes into the FMC, like by a program? or get a freeware produce. Rafman925 :(

HiConfiguration Manager for FS2Crew 2010 tells me that a version 2 for FSX Default 737 is available. I logged in to my account and downloaded the file that was 150 808 kb. Interesting because my version 1 was 42 169 kb and version 1.1 was 42 554 kb.I followed the instructions to UNINSTALL the old version (panel.cfg, 2010 librarys and so on). Installed the new version 2, started Configuration Manager and inserted my serial number, that was accepted and the program activated.When I start FS2Crew 2010, it tells me it's licensed to me BUT in the lower left corner it says Version 1.1!!!! What have I done wrong?Jack J JacksonSpain

Dear Bryan,First let me say, I am very pleased thus far with the PIC737 Fs2Crew product.It really does make if feel real. Thus, far, (aside from learning curve, which is exciting too), all is working well.One thing though, I do not see a Green Display Bar that the instruction is indicating. The bar that tells you what words the speech system is recognizing. I do have the DSP on the main panel to ON, but where does the bar appear?The system is recognizing my voice 90% of the time.ThanksDennis

Hi Brian,Great stuff the 737PIC.Works loke a charm.But I have a question about DH.I fly to EDDF , so in the arr elev in cfg panel I enter 400 but what do I enter in DH if I put 200 in the airplanes DH panel?Since there are two "20" entries I'm not sure.In manual you talk barometric so maybe I have to enter 600 in DH (400 elev +200 DH)?And one last question ; also in manual you state to enter the arr elev in the presurazation panel.Is tha t the little bug on the aircraft's altitude gauge?Much appreciated.Regards...Marc

Bryan, you suggest using a quality microphone with FS2Crew 2010. Got any recommendations on a good microphone?

Dear sir, I have a few questions about the voice commander series of fs2crew for both the Wilco 737 PIC and PMDG 737 of which i own both.My first question is will the PMDG 737 version still require you to start in the default Cessna ? If so is it possible to make a gauge that shuts down all required switches which can be accesed by the FS2Crew panel to either Cold and dark startup or with just electrical power connected as the crew would usually find the aircraft ? Would it be possible to post a video on youtube of the WILCO 737 PIC in operation with FS2Crew ? Exactly which procedures are modeled ? Does the scope of procedures extend as much as those posted on the FSX PMD…

Good evening from The Netherlands,Great product you've made Bryan, It ads a new dimension to my flying experience.However there is still one major problem. Since I installed the PIC version of Fs2crew, my FSX crashes often. I enclosed a pic of what happens.As you can see I have FsPassengers and Radar Contact running as well as REX 2.0. This crash occured when I clicked the FsPassengers tab but I also have had it right after I took off. I would also like to add that this all occured when in windowed view, I haven't yet tried it in full screen.Hope you can help because this is a great product.Thanks in advanceMark

Hi Bryan,first off all - you are the best !!!Wonderful products - superb support :( Flightsimming is much more better since you releasd your first product.Pls confirm that this is no little buck:sometimes (1 from 3), after take off, my FO toggles between LNAV/VNAV, LNAV/VNAV.... (speeking and pushing the buttons)The only thing the helped is to push "off" voice. i all other phases, i have no problem and more than 95% recognitionlooking forward for the FS9 737NG PMDG Voice Commanderall the bestWerner

Hi guysi have the 2010 voice for the PIC 737 series.I was just wondering, how much of a performance hit do you think the add-ons gives.I certainly have noticed a slight hit, sometimes a large one, but my findings are inconclusive yet..Whats the views on this?CheersAlex

Hi,I was just wondering if the Wilco 737PIC version of FS2Crew has the traditional keyboard press option as per previous versions of FS2Crew, or is it voice-only?ThanksJonathan

good evening,Yesterday I bought the new FS2Crew for the 737 pic, however, since yesterday I am trying to solve a problem: when I start the first checklist (using the speech recognition) with the FO , the flight simulator simply closes (specifically crashing). Anyone have any idea what may be happening?Gabriel.

Hello Bryan,I hope you consider looking into supporting this aircraft someday with "Voice Command" Eaglesoft Citation Xv2I don't really want to fly anything without "Voice Command", so I've got to get you to support my favorite aircraft.Of course, I'm sure you will be more focused on upgrading all the ones that you previously covered with the standard versions, but maybe you can consider this one too for in the future.Thanks,Bob

Hi Before i buy this i would like to ask a few questions ..1) Is it possible to turn the speech off so it kind of reverts to the older stile FS2CREW ? ( cant see the wife being to happy with me talking to my self when shes about :) ) 2) I fly on Vatsim so wondered if talking to online ATC would interrupt with FS2CREW ? Thanks Rich

Hello,I have bought all your versions from the cesnna to the md11 and i must say, this new method of using fs2crew is very realistic.The only thing is that i have some small problems.1.) I have set the feelthere 737 config manager to start up cold and dark. When i load my 737 it is cold and dark, so that is working. the only think is that my FO is going wild on the switches which will result in the fact that i have to set all the switches for myself. For example:" the FO sets with the before engine start sequence the packs to on and the apu bleed to off. This is not the way it has to be for engine start so when i say : "Start engine number 2" the FO sets the …

I am very interested in this product especially after reading Chip Barber's review. I have on my wish list FSPassengers (currently playing with the demo). After watching the videos and reading different things, how does FS2crew work when FSpassengers is running? I know both programs will provide V speed call outs etc. What kind of conflicts or can I expect/what can be done to avoid them? Thanks.

Hello, I bought the Default 737 VC for FS9 last night...and i still haven't been able to figure out this problem.I was up until 4AM, just re-installing the latest Directx, and .net framework.When i load the FS2Crew main panel, i get a pop-up saying "error code 0x80070057 Please contact fs2crew"Hopefully this isn't because I'm using a different model with the 737 panel, so does FS2Crew use the default 737 model, along with the panel? (Hoping not to be true).Thanks in advance

Captains,The latest FS2Crew 737 News as of Oct 30th, 2009:FSX Version Updated to Version 2.0!Summary: This is a very minor update. If you're happy with your current version, there's is no real need to upgrade to V2.0.To upgrade to V2.0, you'll need to login to your FS2Crew account and re-download the main installer and do a re-install. Please give 3rd party vendors until the end of the first week of November to get V2.0 up on their servers.IMPORTANT: Please uninstall FS2Crew 737 first and double check that all FS2Crew window and gauge entries have been removed from the default 737's panel.cfg file prior to installing V2.0. That's very important.Your panel.cfg file ne…

Dear FS2Crew Drivers:I've just released the 737 Voice Commander product!!!Here's a direct link to the product page:FS2Crew2010: FSX 737 Voice CommanderPrice: 19.95 EURThis product represents a RADICAL change from the way FS2Crew has done things in the past. The only similarity between it and the old versions is that we model Airline/Flight Crew procedures; other than that, this one is totally different.I ask that you please support this product and help spread the word about it to your friends in the flight simulator community.The 737 voice commander product is a bit of a test for us. If enough people take to the concept and the idea, then we make more Voice Commander p…

Hello everyone, Im really pleased about this product but I have two problems:- when I save my flight in certain moment, when I come back to simulation I can't hear any response from PNF - but he's following my commnads like gear up, autopilot on etc..- when I enable autopilot my 737 trying to fly to moon (raising nose like crazy) no idea why... before fs2crew installation was fine.Can anyone could help me?

Hi, is there any trick to convince my copilot to follow my commands? He reads checklists but whenever in flight I use simple standard commands like GEAR UP than this command is properly recognized by the system and reproduced in the green text window but nothing happens. Same with any flaps setting, autopilot on/of etc.Phil

Hello,Since I updated to version 1.1, I have an odd side effect. Everything is normal until I click on the flaps gauge to bring up the fs2crew interface for the first time. As soon as I do, my cursor flickers from a normal pointer to a circle (equal to hourglass in older windows) and back. My frame rates drop a bit and I believe that my performance gets worse the longer my flight. Everything behaves normally otherwise with no problems with voice recognition or flight.Any ideas? I can't think of anything else that's changed but maybe I overlooked something. I'm hoping that this issue has come up in testing. I've tried uninstalling fs2crew and reinstalling. Unfortuna…

Dear Sir,I have had this product for a little while and with varying degrees of success am happy with it.However today i installed the version 1.1 and thats when it all went wrong.I cannot click on the flap gauge to call up the panels it will not allow i have checked thecfg with the one you have pinned for us to compare and it is the same.I then went back to the version 1 and all was ok.During all these events I uninstall and reinstall many times trying to get it to work fromversion 1 to version 1.1.I am now unable to use it because there is a licence problem error.Please can you help me to fix this and get it working again.To note I can get the gauge up from the fsx task…

Hi everyone,I need about 5 more testers for the FS9 version, which I hope to release very soon.I also need some testers to check over the FSX update for the 737 Voice Commander.Please email if you can do a couple flights to ensure I didn't accidentally introduce any new bugs.Cheers,