FS2CREW: PMDG 737 (FS9), WILCO FEELTHERE 737 PIC AND DEFAULT 737 VOICE COMMANDER

I'm trying to find the time to make a demo video showing the PMDG 737 and 737 PIC version of FS2Crew in action.Is anyone else currently working on making a video showing the same thing?

Bryan,Super cool product... This is not fs2crew causing a problem, but when I'm at an airport, specifically Princess Julliana in St Maarten, when the crew pushes the aircraft back it can run into ground items and cause ground crashes. Do I have to set the pushback parameters exactly? I'm not sure in fsx what distances are and how far to push the plane back.The other big item not yours but wanted to see if you or anyone else here knows, my Wilco pic 737 will ground crash if an fsx airport tug tries to connect with the nose wheel. I tried searching for an answer, but have yet to get anything specific.ThanksNorman

why when i install my pmdg software it try to either repair it or remove my misosoft visual studio 2008, which already updata

Hi everybody, greetings from Spain.I'm a very happy and proud owner of FS2Crew 767 version, and without any doubt I've purchased PMDG 737 Voice Commander.I need you to recommend me a Flow Chart for FS2Crew for B737-800. I've seen just a few in Avsim library but not pretty sure if there are any better.Congratulations FS2Crew Team, you've just improved youselves again!!!!Thanks a lot and Happy HolidaysPaco

I just purchased, downloaded and installed the program however I have not recieved a license code. I have tried clicking the gauges as previously advised but nothing happens. Can I please get my code so I start using this? A second question is, I am with Delta Virtual Airlines and have aircraft from our fleet added in (not payware). Am I able to set this up to work on my 737-800 that I fly online? Thanks in advance. Jack

Hi I am a proud owne if the Wilco 737 PIC and the FS2Crew 2010 Wilco.It seems our flows are crossing paths somehow..Captain's flow...according to FS2Crew:1. Start APU2. Left Pump on <---wouldnt that be before starting the APU in real life?3. Set up Comm and Nav Radios and FMC...FO Flow...1. Battery on2. Fire test3. Confirm gear down4. Nav lights on5. IRS to NAV <-----why does he mess with my IRS!!! LOL and he goes from the off position to the ATT position then back to NAV when he goes to the ATT position it messes things up. According to Mike Rays "The UNNOFICIAL BOEING GLASS 737-300,400,500) SIMULATOR CHECKRIDE Survival Manual" The FO doesnt need to touch t…

Merry Xmas Everyone!Hope you all have a great Christmas!I'll be out of the office for the next couple days, but I'll be packing my notebook.I'll be checking my email and this forum intermittently over the next couple days when I have a free moment, so if I don't respond right away, it's because I'm probably eating Turkey.Best,

If you're a member of Delta VA, I've modded your panel.cfg files for your custom FSX and FS9 737 NG so they will work with FS2Crew Default 737 Voice Commander.Please email me to request the modded panel.cfg files for your [email protected],

The 737 PIC version is proving to be pretty popular.I know a lot of you wanted a "Voice Commander" for a complex 3rd party aircraft (like the 737 PIC) so I delivered one.We have a lot of 737 PIC users out there now - welcome to the FS2Crew club for the newbies!So what's does everyone think about it?Like it? Hate it? I'd appreciate feedback so I can make these things better.Cheers,

Hey Guys,first: I bought this programm and have to say, that is really cool - nice done by the team :( I

Hi,I have an issue with the Fs2crew 2010 737 PMDG Edition: when I announce "Starting sequence is engine 1 and 2", after this I call for "start engine one" and the overhead is displayed but nothing happens, the switch is not selected to GRD. But when I call for "start engine two" the switch is selected to GRD and the starting sequence is correctly iniciated. I don

Hey,just bought the PMDG 737 Voice Commander Set for FS9 via the FS2Crew online store system.After I was redirected to Paypal and I confirmed the payment, I received four mails:1. Your order from the FS2Crew online store (one with 'Download files')2. Your order has been updated3. Your order from the FS2Crew online store (a second one with download links)4. Your FS2Crew Activation CodeSo, the problem is, that using the download links does not work for some reason. Your site only says, that'Something Went Wrong...You have requested an invalid product download. Please try again.'Now, is this normal? My order has been confirmed and the mail states that the order has been comp…

I have Voicecommander and its fun!!! I have a question, is development from Voicecommander for another Addons for FSX such as Pmdg or Leveld in progress?Thanks...Cuni

Dear Bryan,I am having a good time with my FScrew PIC737 and would defiinitely want to pursue the PMDG 737 as well, but I have to dread the fact about reinstalling my pMDG 737I recall that the proper installation for PMDG is 737-600/700,FIRST then PMDG 737-800/900, THEN PMDG 747 and MD11. I already have 747 and MD11 installed with addons already. I do dread un installing and reinstalling again. :( I know this is mostly a PMDG question, but do you recall this procedure and is it accurate. If so, It does require alot of work before I can work with the FS2crew PMDG737.Your thoughts!Dennis

Hi all,I just tried to start my first flight with FS2Crew 2010 and the PIC737.Unfortunately I cannot enable the VOICE-Button at the FS2Crew-panel. When I try to enable it by left mouse-klick, the "ON"-Sign of the VOICE-Button flashes only short time and disapears; I can't lock it.There is no note message and no Green text bar. My microphone works well at Microsoft Speech Training.Has anyone any idea, what could be wrong at my system? (FSX at Win7 64bit)Regards,Dietmar

I hav installed FS2 crew 2010 default 737 and have installed Microsoft DirectX redistributable (March 2009 or later). NET Framework 3.5 andMicrosoft Speech Recognition i have also said yes and activated the product but i am still unable to open the main panels by pressing the flap indicator, i have version 1.0 and unsure if this is the problem, if so how can i update as i cant find an update, also i cant see any FS2crew in the default 737 cfgcheers.sry if in wrong forum section

What does everyone think of the new PMDG 737 Voice Commander version?I'd be interested to know how you like it compared to the original version that was released back in 2004.It's very different from the original version.

Hi,I am interested in the new version of FS2Crew for the PMDG 737. However I am using the German version of Windows 7 Home Premium and don't want to fiddle around with Vistalization and change the display language in my Windows. Is it possible to use the new FS2Crew without voice recognition (similar to the old FS2Crew version)? Is voice recognition just a feature or an essential part of FS2Crew?The features of the new version contain AES and FSPassenger integration. How are these programms integrated? Is it possible to start a push back in FS2Crew and the push back being performed by AES? And what are the features of the FSPassenger integration?All the bestUli

Hi, I am currently doing my third flight. I still have some issue due to my english speaking LOL.I have a few questions :1

Having recently purchased voice recognition wilco feethere 737 pic I can not get the button to click on yes for voice recognition. I have activated the voice recognition on my pc and have purchased a high spec microphone.The panel loads ok and i can alter the other commands ie cabin lights and cfg panel. But I can not get the voice recognition button to stay on? Can anyone help?Tagheuer66

Hello,I was wondering if someone could help. I downloaded and installed the 2.0 version of 737 commander. The download went smoothly and I put in my code key. I recieved a message saying it worked as it always has. I then booted up my fsx and click on the flaps button. The screen came up but when I clicked on the voice recog. button it said my authentication was not valid. I entered it into the license manager and it accepted. Can anyone shed light on my problem. Flying w/o my co pilot is not fun!

Still getting to know the product and have hit a couple of minor snags...mostly me not knowing what the logic is.1. Engine Anti-Ice - Is there logic around this, or does the FO always just turn it on?2. Taxi Light - After touchdown it is always turned off by the FO during rollout (with the landing lights). I think it may not be being turned off after takeoff, but I'm not sure3. Center Fuel Pumps - Anyway to have the FO not switch them on when the tanks are below a certain level (i.e. 1000lbs)? Or perhaps a way to just avoid getting them out of sync?Thanks!

Bryan,I'm having an issue that has occured on my first two (and only) flights with the new 737 version. All is well until just after gear up....I call Heading Select which is acknowledged, and then Heading <180 - or any other heading>. When I do this, the IAS windows gets commanded to maximum value (i.e. 450), voice commander quits responding to any commands (although I see they are appropriately recognized in the green box), and when I can't use any additional values on the MCP.I was able to complete a flight without issue without using fs2crew -- still installed, just not issuing voice commands.Any thoughts?

I recently bought the fs2crew for my PIC737 in fs9. After installing it I experienced some big problems. When I click on the MRI to start fs2crew, It starts loading and I hear a pling in the background so I minimise fs9 and go to the desktop. There I find a little screen saying "invalid xgs path" please contact fs2crew error code 0x80070057. However I continued in the sim to the cfg panel where you set languages and departure preferences. And when everything is set I click on start and fs crashes.I contacted fs2crew about this and thai said that I should install a few thing wich I have done. Net 3.5 latest Direct X, SAPI wich I

Hey Bryan,I'm still trying to find my way around the PMDG 737 voice FS2Crew (thanks for the manual, BTW). One feature request for future voice commander products...Any chance of putting a voice command to tune Comm frequencies? I ask, because this is quite difficult to do when hand flying on Vatsim...it's nice to have a facility to tune freqs without taking my eyes off the proverbial road.