I know this subject has been brought up before but I could not fid an answer to solve this issue.

I can hear the lady asking " Can I take your coat please " in my left ear when FS2crew is running.

Any help would be much appreciated

regards

Brian Lavelle

Any help would be much appreciated

regards 

Brian

I installed fsx steam edition and downlded fs2 crew 737 default voice and nothing hasppens I have tried everything I can think of but its not working can you help me to figure out whats going on 

thanks Les     oh and I'm using windows 10 

I'm attempting to program where the FO's and ATC sounds comes through the headset, and the rest of the noises come through the PC speakers.  According to a few YouTube videos this is possible, but I can't seem to find the way.  My HS "on" or "off" does nothing.

Any help would be appreciated.

Can anyone tell me how to properly and fully uninstall FS2Crew 2010 default 737 voice commander? I know for a fact that upon installation, the FSX configuration is edited and the default 737 panel is changed to allow for the clicking of the flaps gauge. Upon uninstalling the last time, FSX became corrupted and had to be uninstalled and reinstalled again. This required me to reinstall all of my addons which took days to complete. I would love to reinstall FS2Crew again but would like to know how to uninstall it if need be. Obviously, just using the windows uninstall does not work. I would guess that is because of the editing of the FSX configuration. Please help. I can not go through another reinstall of my complete simulator and am reluctant to install FS2Crew again because of that.

Thank you in advance

I just purchased the wilco 737 voice version for fsx and did so thinking that the chances were good it might port over to p3d via the migration tool : ) What happens is that when I click on the rmi to activate it, p3d freezes and crashes. I also attempted to get the sp1 version to patch but it said it couldn't exe because it couldn't find the orignal fs 2crew program.

Is there any way it might be able to work in p3d or was this just wishful thinking on my part?

Please help!

Thanks

regards Steve

Can anyone tell me what is going wrong? All seems to work ok, but as soon as I start to taxi and the crew will make the anouncement, it does not. I mean, I hear the chime which means the crew will speak to the passengers. But after the chime, the crew does not speak. Is there a solution for this. Its a great program, but this is missing :-(

Thanks for any reply and regards,

Ed

      I recently bought a legitimate copy of FS2crew for the default 737 from the flight sim store. When I tried it out on the 737(default) it didn't obey almost all my commands. the only thing it actually did was the checklists. When I gave it autopilot commands (while airborne or not) like heading 250 and speed hold on, it said set but it never did any of it and also it doesn't set my com 1 or 2 or nav or anything when I tell it to and  when I click the flap gauge, the main panel doesn't open, so I have to get it from the views tab. I have don't the voice training about 3 times, I have uninstalled and installed (as administrator) and I have the sp1 for fs2crew but it still doesn't work and I have also read the manual.

Lastly, when the main panel displays a mode such as takeoff roll (yellow) is it supposed to change itself because it never does and how do I contact the start crew or ground management for pushback

Does this aircraft not have any?

I have been a long time user of FS2Crew voice for the wilco 737 on a windows 7 machine however, I have just upgraded my machine and unfortunately, it has windows 8 installed.  I was wondering if there are any issues as when I load the wilco 737, the sound button is off and nothing I do will allow me to switch it on.  I have gone through the setup in the instructions and I do not think I have missed anything?

Just wondering if people could help me on 2 little issues!

First is on takeoff, I arm the auto-throttle, spool to 40% N1, but cant or perhaps don't know how to engage TOGA mode. I have tried CTRL+SHIFT+G which i believe it is assigned to in FS9 but nothing happens. If there is one part of the FMC I am lacking knowledge in is setting speeds and climb speeds etc. Can anyone help or explain this to me!

Secondly, i see from posts made years ago that there is a British sound-pack for FS2Crew, can some re-upload it or send it to me? from what I've read it seems it was lost on the AVSIM library when it crash a few years ago. There are updates still on avsim library but the original file (fs2crew_british_767.zip) is not there!

Thanks and I really appreciate any help with this fantastic product!

I'm having some issues with my voice recognition.

To start with: I have done a lot of configuration and voice training. It works smoothly and I also recorded myself to check if there is something wrong with my mic. I also used several different mics.

My problem: At different moments my co-pilot constantly thinks he is gettting a command. Especially the LNAV. 

After take off it happens a lot (like 10 times or so) and it also happens during approach. 

During flight I switch off my microphone completely to prevent the copilot from switching off LNAV.

Furthermore, during approach (and sometimes in other stages as well), the copilot constantly says: check, check, check, check, etc... I played with the mic boost, but nothing is succesfull yet.

Furthermore I noticed some people having minor issues I like to report as well, like:

-Copilot switching on and off the landing lights sometimes up to 4 times before take off.

-Cabin crew, prepare for landing is only given when I have a high rate of descend through 10,000 feet. 

-At gate arrival, the copilot turns off all fuel pumps, while APU is still running.

Beside the above, I still enjoy the program to the fullest! That has to be said.

I hope you can help me.

Kind regards,

A. Papaioannou.

I try to use old instalation of FS9 under Win XP with PMDG FS2Crew VC under new installation of Windows 8 Pro 64 bit.

Everything works except audio of FS2Crew VC. When I activate Fs2crew in cockpit (on flaps gauge) comes error "fs2audio.dll failed to load error code 0x7e" (despide I made a copy into Windows/System32 directory (I'm not sure if it could be case sensitive problem as in XP installation it is named WINDOWS/system32 and in Win8 it is called Windows/System32). After it FS2Crew starts, but in audio setup Crew region is empty and in Headset is written "Could not be determinated".

Sound recognition and procedures works, just can't hear readbacks.

Any ideas if it is possible to fix without reinstall?

Kind regards

Arunas

Excuse my grammar and thanks for your help.

Best Regards.

I've purchased Fs2crew for the Evo version but I can't find what keys it uses.

For example:

During shutdown checklist it moves the start switches to GND... sometime it doesn't complete to full checklist.

Can someone please post the keymap ?

I've just purchased Fs2crew for 737 Evo just to discover it has many problems. (Evo 737 it self !)

I didn't do a test flight before and I discovered it in my first flight with FS2crew.

Fs2crew work perfect, and it might not be the right forum (the is no offical Evo forum out there...) but did anyone have any problems with the A/T ? It seems they don't function properly regarding VNAV Etc... When reaching cruise they won't decrease... it reaches OVERSPEED... this is only one example...

Did anyone encountered it ? Any solution ? :unsure: :unsure:

I am, to the very best of my knowledge running the lastest version and don't believe I have directly changed anything.

Anyone else had this or got any ideas what the cause may be.

Thanks

Chris

i enjoy the whole experience of the 737 default version,however,

the "can i take your coat"lady doesn't appear to finish saying "can i take your coat please"

either 1) there is alot of dam coats or

2) im doing something wrong

any help would be great

best

What is the command to set squawk code?