TTools for MSFS Forum

Hey guys I just installed TTools and also I did the PAI installer with the airlines that I wanted. But whenever I start FS9 it gives me a thing that the modules might not be compatible, I click yes to run them anyway, but FS9 crashes. I know there is a way to put down an old modules title in the FS9 CFG file but I forgot the correct proccess into doing this any help would be greatly appreciated!Cheers!

Hello everyone:This might seem like a newbie ques. I own FS 2002, and had been using traffic generated by TTools for more than a year. Now I have a new computer, and have re-installed the FS 2002 on that machine (P4-3ghz, 128 Radeon 9800 Pro, 1 gig Ram, SATA drive 120 G), and after copying the old traffic.bgl to the new computer, I don't have the airport overlays available, and although the Airport list (after decompiling the traffic.bgl) shows the overlays, they are not available in the list when I go to change the airport. The aircraft are all transferred also.Any help would be appreciated. I have tried to recompile the traffic.bgl several times without success. Thanks.

I have two flight plans that I'd like to put together, but I can't figure out how. I'm just confused. If someone could put them together or guide me through the process. It would be greatly appreciated! Thanks!"AC#1,NUS32,50%,24Hr,IFR,12:05:00,13:18:29,110,F,5577,KPIT,17:10:00,18:23:29,100,F,5232,KRDGAC#1,NUS33,50%,24Hr,IFR,18:40:00,19:53:29,110,F,5578,KPIT,03:25:00,04:38:29,100,F,5236,KRDG"I just want one flight plan instead of two. Any help would be great! Thanks in advance.:-jumpyCheck out my work: http://library.avsim.net/search.php?Search...Weik&CatID=Roothttp://vatsim.pilotmedia.fi/statusindicato...tor=OD1&a=a.jpg------------------Kenneth WeikTWVA395 / HRDw…

Hello All,In TTOOLS i never quite got what the repeat period was. Does it meen the acft will fgly the flight you program, come back and fly it again 6 hours later(if i slect 6). Im stuck with this as i noly had a very small scedual for certain airports which filled all the gates up until the dep time.Help PleaseBlake Beattie

HiI have not started playing with AFCAD2 in earnest yet since I have just bought a new computer and I'm trying to get FS9 up to date on it - reinstalling everything etc, but I have noticed the following:At Manchester, EGCC, I have a the 'Stock' BGL and a 'MOD' BGL installed. The latter is a higher 'layer' than the former. The latter has runways 24L and 6R noted as being closed for landing and takeoff respectively. However, when viewing traffic I see landings taking place on 24L. The other runway, BTW, is open for all movemements.Can anyone explain why this might be case?Thanks in advance.M

Guys, first thank you all for your great works with AFCAD2. Im enjoying these very detailed airport schemes tremendously. I do however have a request. I think its simple, but its basic quality control really. Please be consistent with your material selection in the taxi ways and tarmac. I see lots of fabulous gate activity with mixed asphalt and concrete taxi ways that dont look right. Please choose a particular material and stay consistent with it. I spend a couple hours fixing somebodys excellent KLAX and KPHX airports to make the taxiways a single material where consistent to apply it.This means...a segment of concrete with a small segment of asphalt..then more …

Hi everyone!Im preparing my airport

After glancing through it I think Lee will be making BIG strides in AFCAD! It has all the info needed ILS, GS, Buildings. et al!

Hi guys I was wondering how to add an ils for rwy 27 at ksan can afcad do this or do I need another program for this. Thanks Dave.

is there a site or a way to find out a schedule for a plane rather than a specific flight? What i mean is, is there a way to see where a Delta or UNited plane started, where it ended for the day and all the flights in between? Right now i can only see that flight "441 i from KDTW-KORD" ect... is there a way?Brad Zimmer

HelloNewbi in AITM & TTools mattersInstalled AITM12SP1, AITMv2a272, TTools202I want to get Timetables. editing Flight Plans notintended.Studied ReadMe and Newbie TutorialProblem: dead buttons in AITM Timetable.Need precise helpG

Maybe this is a stupid ?. I havn't messed with AI traffic before, just started reading about it the last few days. But is there a way to get rid of the stock aircraft ie: Land mark, Orbit.... .Then use any AI aircraft that I may download, but use the same default flight plans that FS2004 uses. I want to see aircraft like Northwest or Delta, not the fake ones in FS2004. Was that a stupid question?Thanks in advanceBob

Heres my question...I have the newest ver. of both TTools and AITM...but when I go and try and compile...it gives me an error report saying that it can't find airport (ie... 2ORD, 3ORD) which were overlays for my airports in 2002. When I go in to find the airports they don't exist, yet AITM shows them in flight plans? Besides going in and changing each is there another way. By the way the airports also don't show up in "Move" so I can't just move them. :-hmmm Jeff

Hello,I face the following problem:When an AI aircraft performs a landing then it touches down the middle of the runway instead the first feets of it. As a result, it ends up straight out of the runway, turns back continue straight untill it reaches the end of the runway, taxiing/parking ok. The traffic works ok - despite this problem.This problem does not occur to all airports I have altered only at a few. I changed the approach speed/also different AI plane it didn't worked. Also increased the length of the runway didn't help also.Any idea?

Ive tried to find AITM for 2004, but have been unable to find it. Does it exsist? Any help would be appreciated. Thanks Jeff

When opening an airport in AFCAD 2.11, ALL the airports, including the original ones, are marked as MOD, and none are marked as STOCK. I had expected the untouched ones to be STOCK. Is this correct?Joe

I have noticed that I can not see the flight numbers of the AI planes far beyond 11 miles. In other words, the sky is clear blue most of the time allthough there are plenty of flights around me ! The flights work ok - i have tested them. Ctrl+W - following the planes also. But I would like to alter this 11 miles limit. Any suggestion? Visibility -if this has to do with it- already to unlimited.Have a good day, nikolas.

I'm a devotee of AIView -a great little program frequently mentioned here. I'd like to run AIView on a second monitor so that I dont have to break into my flying to view the other aircraft. I have a network with two PCs and could run a second version of FS2002. Has anyone tried running AIview on a second screen?

I have activated a number of the default FS2004 airfields in my local area using AFCAD2, adding parking, taxiways etc to enable AI activity. No problems with the majority of airfields but with a few, the aircraft disappear as soon as they begin pushback. An IFR flight will get clearance and acknowledge this then vanishes as soon as pushback is initated - with VFR flights the aircraft disappears at the pushback time. The effect is exactly the same as if a parking connector to a parking space that an aircraft is trying to depart from is missing. There is no problem with arriving aircraft - they land, taxi and park as normal, it is when they come to depart that the problem o…

Hi AllI have made my first traffic modifications in FS2004. It's my first experience with TT and AFCAD/AFCAD2 both.I added default AI traffic to an airport that didn't have any. The first thing I added was the parking spots. That went well and easier than I thought. All set for Ramp/Small and Ramp/Medium. Then added the flightplans. That was a disaster but I got it done after a week of trial and error with EXCEL and in the end, a good bit of typing.Compiled without event. Started FS, re-built the databases and voila!, the new parking spots have airplanes sitting in them. I was proud of myself...until I realized, none of them ever moved. I removed the default traf…

Hi,After a reasonable reaction to my touch and go plans for the UK I thought I would try one for all the worlds airports.I wanted to get the correct registration prefixes but cant seemed to get that to work when a random process (didnt want to type 23000 plus reggies in!!!)Tried using AITM but all that did was to remove the plans.Can anyone suggest a way round this for me please. I'm using a default Lear Jet for each airfield where each flight plan line looks like this, where XXXX is the airfield ident.AC#25,G-,100%,1Hr,VFR,00:10:00,TNG00:40,10,R,0,XXXX,01:10:00,TNG0150,10,R,0,XXXXMTIARgds Ron

Has anyone used any FFX model for AI ?If affirmative, how frame rate friendly (or unfriendly) are they, compared to PAI, FSPainter or AI Aardvark models?ThanksStamatis

TrafficSim is a MS Access 2002 database that can be used in addition to TrafficTools and Microsoft Flight Simulator 2002 / 2004. It imports flight plans and displays the aircrafts positions on a map every 10 seconds. In addition you can analyze, correct and delete parts of your flight plans.You only need to test whether it works with Access 2002 (XP not 2003). It's a 5 minute task. If you are interested, send me a mail please.Daniel SchellhammerMail to: [email protected]

Help! I have established more than enough parking places at a small airport I am working on. I have created two flight plans for training touch and gos and two flight plans for Caravan departures and arrivals. Many of the arrivals go missed approach only to approach and missed again and again. Any suggestions are appreciated.>>AC#5001,CAT55,20%,2HR,IFR,18:00:00,18:42:31,050,R,1952,PANC,19:30:00,20:12:31,060,F,1954,PATKAC#5001,CAT66,20%,2HR,IFR,18:30:00,19:12:31,060,R,1953,PATK,20:00:00,20:42:31,050,F,1956,PANCAC#5002,N35599,20%,2HR,VFR,17:30:00,TNG18:30:00,011,R,0001,PATK,18:00:00,18:15:00,011,R,0002,PATKAC#5002,N70851,20%,2HR,VFR,17:50:00,TNG18:50:00,011,R,0005…

If I use the timetable in AITM2 and see that a plane arrives/departs at a certain time what time do I set in FS2004? The timetable says 10:55:43 and that the GMT is +4. What exact time should I set? Thanks, regards, Bob.