Piper9t3

Thanks for posting this video. Very informative. Great job explaining the Turbine Duke's systems.

Ok I am running P3Dv3 so must be within the settings. On another note, I get flashing ISFD when loading up the NGX but when I untick the mipmap setting in P3Dv3 the flashing ISFD stops. Is this normal behaviour?

Is there any way to adjust the transparency of the CDU?

Well Bobsk8 I got my traffic set at 0%....thanks to the wonderful people in this community I was able to install UT2 into P3Dv3.1 hehe

I installed it into P3Dv3.1 but found it very demanding on fps. You should also consider the freeware traffic optimizer utility as well with MT6.

Not happy with it. Likely wont be travelling anytime soon but wont stop me from purchasing future addons....hopefully there will be some recovery in the loonie in the short term.

Can anyone confirm if OBS records any third party special effects on the aircraft (ie. PrecipitFX or 737 Immersion)

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks

I am experiencing this annoying problem with my default views that I am hoping someone here can help me out with. I an running P3Dv3.1 with TrackIR5 and EZCA 1.187 all installed. My viewing problem occurs when I select an exterior default view like Locked Spot. While in Locked Spot view, I temporarily disable TrackIR because I like to control the view using my mouse for which I have assigned the Space bar in the P3Dv3 view control settings Mouse - Control view direction (on/off). The issue I have is when I press space bar in Locked Spot, I can control the view direction with my mouse as expected but the darn view keeps snapping back to the default view position which makes for an annoying viewing experience while panning around the aircraft! I have checked all the other default view settings but not sure what may be causing this. Any help would be much appreciated. Thanks Sorry for the multiple posts...not sure how that happened! I hope a Forum Adminstrator can remove the repeated posts.

That's exactly what I just did. Got a 34" Samsung curved display. I am running it with an AMD Radeon R9 Fury X GPU. I am still experimenting with P3Dv3 settings but seeing a consistent 20-25 FPS in PMDG737 VC with various addons running.

No Saitek for me. I am using CH Products for my flight controls. You should try posting this in the PMDG737NGX forum...

Strange, I have updated to 3.1 and have no issues at all in the PMDG737? The wave animations are so worth the update and LM have made it simpler than ever this time around in my opinion.

Can someone confirm if REX4 TD wave animation and 3.1 wave animation are compatible? I am somewhat confused reading post#226 about having to delete the waterconstants.xml file that REX generates. Is this really necessary?

Thanks for the clarification.

I purchased 737 Immersion and after install, VFXCentral Your Products page shows it in green with caption "Modify/Uninstall". I subsequently purchased PrecipitFX and after install, there is a separate PrecipitFX shortcut created which enables the effects however in VFXCentral Your Products page, PrecipitFX shows up in teal with caption "Download". Why does it not show up in green as this product has been installed? I would imagine VFXCentral is the place to consolidate all FSFX package products?

I had UT2 jimmied into P3Dv3 and installed the client.msi....did not break UT2...it works just fine in P3Dv3.1

My ISFD is flashing in the VC and not sure how to correct this? Happening in P3Dv3 and 3.1. I have tried cycling through the texture resolutions in the display settings but the problem persists. Anyone else having this issue?

For those using UT2....does it still work in P3Dv3.1?

Uninstalled the P3D v3.0 Client and v3.0 Content modules from Add/Remove Programs. Installed the P3D v3.1 Client and v3.1 Content modules. What about the scenery module? Why have you left that out? ​

I don't mind re-installing my addons just unsure if I need to uninstall each addon individually using the Win 10 control panel feature or do I just re-run all the addon installers overtop the existing ones once P3Dv3.1 has been installed??