Fulcrum Simulator Controls

Hello, I tried to send a message to [email protected] the other day, but I got a bounce-back today with this message: Is the inbox not working?

I have a joystick option taken care of already. But I think I'd be interested in a yoke joystick conversion - Vulcan bomber style. I don't know my aircraft like other people - are there many aircraft with joysticks-like-yokes? Oh, the Cirrus side stick too! Is this an add-on that @tutmeister may consider?

I just wanted to share my recent experience I had with Fulcrum support.... I originally purchased my Fulcrum One Yoke almost two years ago. It had worked flawlessly without issue for many flight hours until recently when out of the blue one of the buttons stopped working. So I reached out to Chris via [email protected] to see he could suggest anything to resolve the issue. To cut a long story short we batted some diagnostic emails back and forth but alas it turned out that unfortunately my problem seemed to be something a bit out of the ordinary. With that Chris arranged for my Yoke to be picked up by Fedex so it could be taken back to base for repai…

This post is probably for the developer :- I own a Fulcrum yoke and I am very pleased with it, makes such a difference to simming and would highly recommend it. Right, my question I am in the slow process of developing a permanent instrument panel as I have lots of other hardware. Is it possible to get an extended shaft on the yoke?... Reason is I would like to set it back about 5 cm so that I can mount a Saitek FIP just in front of it, as depicted in the real aircraft (Cessna 172) Obviously this would involve me returning my existing yoke for the modification and paying for whatever cost was involved …

What an amazing piece of kit. Very interesting to fly circuits and adapt new muscle memory after so many years flying everything with a stick. It is so smooth! Flying the King Air it is as if I can 'feel' the aircraft in finer detail.

My order number is #3080 , I placed an order on January 31st, As far as I know, a lot of orders have been pushed back. I understand, it's fine, but I want to know how far it's going. And How much longer do I have to wait? Expect

Hey all, probably more of a MSFS question, but just in case it's related to Fulcrum. . . The January 31 MSFS update is great, except that now every time I shut the sim down and restart, it forgets all bindings to the Fulcrum Yoke and I have to set up both axes and all buttons again. I've been looking for the yoke configuration file in the MSFS folders and I havn't found it. 1) anybody but me having this issue? 2) anybody know where the yoke config file is located, so I can just save a copy of it to drop back in the next time I boot up?

My order number is #3080 , I placed an order on January 31st, and when I looked at the order sheet again, I saw that apartment name was missing. Can I change it from " Haechanvill " to " 204, Haechanvill " All you have to do is add the number 204, in front of Haechanvill Thank you.

Just a quick question for Chris or anyone else who might happen to know, I find myself in need of a retaining screw to hold the yoke handle on the shaft, what size is it and where might I find one quickly?

Our site was hacked and malware was injected into it. The purpose of the code it seems was to redirect users to a different website. Fortunately it was flagged very early and jumped on. Google marked the page as unsafe in bright red, our web team got alerts and plenty of customers email in about it. Also anyone who has used our link in a review video on YouTube video will have had their video suspended as it is against their policy to have videos linking to sites with malware. The site was cleaned very quickly and files replaced from the back ups. The site is up and running with no data loss or breaches in user data. We are changing our firewall and also implementing…

It's been two weeks since I sent a reply to the discussion about product delay, and I'm looking for a response to the refund policy. Please reply via email or site!

I've been noticing random, split-second spikes in the pitch and roll axis while using the Fulcrum Yoke. When I first received the yoke in March 2021, I had just purchased the Just Flight Arrow for MSFS. Every once in a while, I noticed the yoke in the Arrow's virtual cockpit would spike for a split-second -- moving to a different position and instantly moving back. For several months, I assumed this was a graphical glitch. I've never had any trouble controlling the plane because of these random spikes. Recently, I've been learning the FlyByWire A32NX, and the random spikes are causing the autopilot to disengage multiple times during each flight. This is the first ti…

Can use CCard without Paypal? P

Hello Chris, It's been a long time since you announced the 737 handle work.., do you have any new information on when we can expect it? brds Martin

I received an e-mail and sent a reply. I'm wondering if this message always pops up and it's sent because it says delivery failed. "Sorry, I wasn't able to establish an SMTP connection" I wonder if the email was sent successfully.

Greetings, I'm curious as to FS 2020 sensitivity settings for Fulcrum users with the -310. Trying to obtain much heavier flight control feel and less sensitive pitch/roll. My settings are -65 but still not enough.

Hi Chris, Now that the yokes are about to begin moving out the door, I'm already starting to look forward to your Hall effect Throttle Quadrant. Although I have no idea if the TQ design has already been finalized or not, I wanted to pass on some thoughts for your consideration: 1. The less bulky the TQ, the better. Desk ('cockpit') space if typically at a premium, so smaller is usually better. 2. With just a few exceptions (C152/172, etc) most flightsim a/c use electric pitch trim, so no need for a trim wheel that adds to the size of the TQ. 3. A Gear handle is good, and also a Flap handle, although button actuated flaps are OK too. 4. Having an …

Rather than posting the moment I pulled it out of the box as folks tend to do, I wanted to spend time with it. I am an inactive private pilot, and been a simmer for 35 years. So not my first rodeo. The Fulcrum One yoke is easily the best quality flight control device I've used (well, maybe a tie with my Virpil pedals). I have primarily been flying on an old CH stick and pro throttle since about 2000, as nothing has really improved on that. I have owned a CH Yoke, and the old Saitek (Logi) yoke as well and those were both simply horrible, sticky weird disasters. I've never understood why those stayed in production for so long. The Fulcrum yoke is SMOOTH. …

Hi everyone, I received my yoke a couple of days ago. It for 2 days worked perfectly fine, Last night I finished my flight everything ok. . Today I was going to use it and the view was stucked of the right look... Aileron and elevator work fine in Windows but shows ALL the buttons stuck in the ON position and the hihat stuck in the 45 degrees angle. No buttons works. I think the hihat switch went bad... all positions sound with the click and the right 45 when pressed there is no sound.. Any help? Jose

Not sure if any of you guys have seen it... The Fulcrum yoke has been reviewed in the hardware section of the current PC Pilot... It comes out with a superb review, in all departments...overall a resounding 96/100... I own a winner!! Dave

Major update! See the new video and Kickstarter page! https://youtu.be/XGdb2n5CW_8 After listening to feedback from customers we are now including our Pro Jetliner series of thrust levers in the base Kickstarter package! Our throttle system is now unique in that it is the only metal versatile throttle system that can be angle to match configurations of different aircraft. It also comes with working reverse levers and toga and AT disconnect buttons. Of course it still comes with the standard twin propeller setup as before. This is a significant saving over the retail price as these were scheduled to launch…

Installed and calibrated my Fulcrum but despite the buttons working and the calibration being successful, I am not getting any aileron or elevator deflection on the sim. The standard X plane test for this is to show the data refs on screen and they are stubbornly at zero. i have a dual yoke set up. The other Saitek yoke works fine. it seems the Fulcrum is not setting itself any axis numbers at start up because the initial assignments file that’s written at the start up has no pitch or roll for the L_Pitch_Axis or L_Roll_Axis which corresponds to the Fulcrum device. Thanks for any suggestions how I can take this further?

Is there any way to assign a short cut (combination of keys) to a button for the Yoke One ? I am trying to apply the short cut for the FSKneeboard app but that of course isn't a function within MSFS so I cannot map it to the yoke in MSFS - and outside of MSFS the yoke is just considered a regular game controller which I can test or calibrate but afaik not map buttons for. Any good advice on how to get this done ? If nothing helps I guess i will need to use VoiceAttack, but I would prefer to map it to a button (one program less to run when simflying)

Hi, I have received my Fulcrum Yoke already a while ago, but due to various issues (SSD malfunctioned and I waited for warranty replacement for ages, etc.) and advice from my flight instructor to not mix real and virtual flight experiences too soon, I only turn to install it now. At this stage I would want to mount it on a Wheel Stand Pro Deluxe V2 (Wheel Stand Pro Deluxe V2 - game console accessories (Black, Stainless steel) : Amazon.de: PC & Video Games) but unfortunately the plate is just a bit too narrow to accommodate for the holes I should drill for my Fulcrum yoke. Does anybody know where I could purchase fitting mounting plates ? Or who would offer to produce …

Just got my Fulcrum Yoke and set it up. Did a test flight with my Zibo737-800, in Xplane 11.55. I set the sensitivity curves to linear for pitch and roll, and set up the switches I prefer. Excellent behavior - pitch and roll are smooth and the longer travel distance/angle and higher resolution makes for a much more realistic feel and behavior. It will take some getting used to, as my muscle memory has 700+ hours using the old CH Yoke - with significantly less travel and lower res - which required customized sensitivity curves to approximate correct behavior. Overall, great product so far. I have a query that is so hard to get a straight answer from Xplane people…