Lorby-SI Freeware

Hi I have noticed in the last couple of days when I go to use set real weather I get an error message The remote server returned an error (308) Permanent Redirect. Anyone else getting this and is there a fix Regards Rhys

A couple of Months ago I built a Device for MSFS with an Arduino Nano V3 using the AAO's Arduino Bridge. Everything worked fine on that Device. After some Weeks of not using it, I plugged it in again and found it not working anymore with AAO. Long Story Short: I ended up with a brand new Arduino Nano plugged into a Prototyping Board with a single momentary Push Button connected to GND and D2. I wrote a short Test Sketch in the Arduino IDE, just to make sure everything worked, and it did. I then created a brand new Configuration in AAO and added the new Board to the Arduino Bridge. The COM Port of the Arduino was correctly identified bei AAO. I just added a single Inp…

I am having to replace the HDD that windows is installed on, and will have to reinstall P3D v5. I moved the Lorby Add On Organiser folder to another hard disk and it still seems to be working ok. I am hoping after installing the new HDD and reinstalling P3D it will still work, or work with something simple done like adding Lorby to P3D add ons. That would save me time in recreating scenery groups, and redoing my scenery order etc. Does it sound like that might work, or will I just need to start from scratch with Lorby once the nerw HDD is in, and P3D has been installed again? Thanks

Hi Oliver, I've just uninstalled P3Dv3 addon scenery and the sim itself. When I open AIO and select P3Dv3 tab the entries are still present. If I select multi-select the option to delete is disabled. Is there a quick way to remove P3Dv3 entries and the option along the top please?

Hi all, the latest updates for Windows 10 came on September 12th. This includes the .net Framework Update 3.5 / 4.8 (KB5030180) Since this update, the Addon Organizer can no longer write to the Documents folder. You get the error message: Access to the path "C:\users\name\Documents\prepar3d v5 Add-ons\Scenery-Name is denied. "Your User account doesn't have write access to the P3D config files." It doesn't matter whether you start as an administrator or not. Regards Dieter

Hi Oliver- I'm trying to extract 1.57 with LORBY as password and it's rejecting it. Has this changed? Thanks, Mark

Hi- I've installed V6 and was wondering if AO will bring in aircraft that aren't really supposed to be there :>) Anyway, I have 5.4 also installed and have the A2A Bonanza externally installed as an add on. Can AO do this? Thanks, Mark

I am using Addon Organizer v. 1.56 b09 with P3D v. 5.3 HF2, and am very happy with it. I have now started organizing my photosceneries into groups, and created one for my African sceneries. Then I moved my sceneries into the group with the --> as instructed by the manual, and (as far as I could see) deactivated the group. However, the sceneries are still in their "original" position, as well as in the group. Should I delete them from their "original" position (that is, where they were along with all the other sceneries) so they are only present in the group? That seems most logical to me, but I thought I better ask before I did something I would regret.... …

Hello @ll, unfortunately the free datasources that LLTX was using are no longer free. The RealTraffic subscription is currently the only datasource left for LLTX. Therefore I have decided to remove the app from the downloads options on the Lorby Site. to limit LLTX cost free operations to what is currently possible. In my latest devel version of LLTX I have implemented a new route planner for the planes in "Simulator AI" mode that doesn't require accessing the RouteFinder website. If LLTX users who also have RealTraffic wish to try it, please feel free to contact me. Best regards

Hi All, who stores the Addon Manager his settings. I have deinstalled P3Dv5. The Folder under Documents must be deleted. But Lorby Addon Manager has scenery data for P3Dv5. Which files can I delete or how can I reset it. The Reste function from lorby doesn't work Regards Dieter

I have problem with Addon organizer for MSFS 2020 after SU10 - content.xml error.

I have got a new sim pc, and I have installed P3dv5 as a clean install.I have for many years used Lorby addon organizer to install my scenery addons to the simulator. I have downloaded and installed it on my new pc, but only the upper half of the screen shows up when I start Lorby, and I dont know how to make the screen bigger. Can anyone help me? Tor Arild Danielsen

I have installed MASO 1_07_b04 and when I start it I get the following error message: "Error when reading config file:< C:Users\.....\Conten.xml> There is an error in XML document (2,2) . init. It is strongly advised not to continue with MASO. The content of the Content.xml is as follows: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <Priorities> <Package name="fs-base-nav" priority="1"/> <Package name="navigraph-navdata-base" priority="2"/> <Package name="navigraph-navdata" priority="3"/> </Priorities> What should I do to be able to use MASO? Thanks for the help Stefan Liebe

There is a virus, possibly ransomware, on the P3D4 Addon Organiser. I have tried to download the file several times over the past few days and on each occasion Windows Defender has flagged it as 'Severe'. I have suggested that it might be Ransomware because my computer was recently infected with a Ransomware virus at approximately the same time that I first downloaded and installed P4AO. Mike

It seems that the mooring tool is no longer working in SU 11. It would be highly appreciated if you could look into this. Thank you.

The lower part of the UI is missing. I have checked the settings as per the embedded screenshots in an earlier post and I have been through the application's compatibility settings, changing DPI and scaling one by one, but to no avail. Until I can get assistance on this the application will remain unusable. The fact that I cannot access the lower buttons of the UI is believed to be the cause of damage to my scenery config file necessitating in a re-installation of my FS Global Ultimate files. An early solution will therefore be appreciated. I am using P3Dv4.5 on W10 Pro v 21H2 with a Sony 1360-768 res monitor. Thanks Mike

Hello everyone, I hope you are very well. Currently I am having a problem with add on organizer, the problem is that the bottom bar does not appear where I can save the progress of the changes I made and I really don't know why it happens, below I leave you the graphic sample so that you understand me a little better and I hope you can help me. Thank you all

Hallo, leider wird der Addon Organizer bei mir nicht richtig dargestellt, da fehlt am unteren Rand etwas. Weiß jemand woran das liegen kann. Danke Gruß Lille

Hello Oliver. I stil continue to use LLTX often, but recently noticed that Opensky now only allows a very limited usage time for the app. Is there a way to give the app the parameters to log into opensky-network.org? I don´t really use realtraffic source. Thank you. (I sent you a PM of the same request.)

Hi all Just out of interest how long should the pause screen be on after connected LLTX I have noticed that on some occasions I have to use task manager to shut down LLYX as nothing seems to be happening Cheers Rhys

Hi all I have recently found and downloaded live traffic and its a great free addon. I do have a little issue that I can't explain I have a Helicopter cockpit and have a starter on my collective. when using live traffic when I start my heli for some reason the N2 needle doesn't want to move pass the 20% and I have to twist the collective throttle to almost max to get the engine going. WIth live traffic not active I can push and hold the collective start and the needle slowly moves pass 20% to 63% and then I twist the throttle to reach 103% as it should I know live traffic is a independent program but I am scratching my head as to why it would ca…

I have had an unfortunate event attempting to install scenery that I deduce has ‘scrambled’ my scenery set-up in P3D v5. P3D will not now load. I am a new user of Lorby Addon and still learning, so to speak. I could see that at least 8 of my sceneries were missing, all previously installed via the ‘add to scenery cfg’ method, not using Lorby. I have gone about reinstalling these sceneries using Lorby, synched the simulator in ORBX and ensured that the order is correct at the Lorby ‘Scenery’ tab. I still can’t get a load with P3D. I suspect much is array with cfg files, Indexes etc., and I am unsure how to go about fixing. …

I have used Lorby Live Traffic for a long time now, to inject AI helicopters in to P3D v4.5 (with HF3). It has been wonderful. However, in the last three days, it has become very slow to run/load. Double clicking the program icon, with the sim running, means having to wait up to a minute (sometimes even longer) for it to run/load. Once running, I do see AI helicopters in my sim and they do work. However, after a period of time (random), the globe icon at the top centre of the program stops rotating, all helicopter activity in the sim "freezes", and there is a long delay before it all starts going again. Worse, sometimes when this happens, activity doesn't "r…

Hello, May I start by saying that I am a very happy (and long time) user of your app. I recently changed PCs and upgraded to a Ryzen 5900X with SSD drives, etc to run MSFS2020 with power to spare. I have installed MSFS2020 in one drive and P3Dv5 in another. When I tried running the latest version of the app today after the install, the program won't start and eventually crashes out with no message, just unloads from memory. I have installed in with no AV and run it with no AV, with the same result. The net frame is installed so I don't understand why the program will launch but not run. Weird. Is there a known issue with the program running windows 11 or with du…

Hello Oliver, RealTraffic has just released a new version 9 build and Lorby Live Traffic 3.03 b05_P3D_V5 does not seem to be able to read the data from the new version. Unfortunately RealTraffic auto updates and I can’t revert back to the previous version to check whether the new version 9 is definitely the issue. It seems the issue is RealTraffic is sending the two digit airline code i.e JQ when Lorby Live Traffic uses the three digit ICAO code i.e JST. It was only when I selected Fill in traffic was I able to get a stream and the flight number column was showing JQ460 not JST460. I hope you are keeping well? Kind regards, Mark