Lorby-SI Payware

Hello, I tried to use FBW A320 profile for streamdeck. AxisAndOHs and its StreamDeck plugin installed. ndp48 & vcredist installed. AAO connected, FBW A320 identified. The profile is clearly identified by stream deck but whenever I press a button (such as strobe, wing ice, spoiler arm), I do not observe any effect on my A320 overhead. What did I miss? Thanks for your help. Alain

I have installed AAO in several P3D versions. When I open AAO in Prepar3D v3, no AAO window is visible; if I hover the mouse over the taskbar icon, there is a "white screen." Again, in WIN10. Thanks, I appreciate your help--

I am trying to use x-touch mini to increase/Decrease the panel lighting on the Just Flight PA28 Arrow 3 (3rd part addon aircraft) By using the Developer mode I can see 2 "variables" increase and decrease in the window when I rotate the panel light switch in the cockpit using the mouse. The 2 Variables are (L:Panel_light_scaler,·Number) which increases in steps of .1 (L:CENTRE_LOWER_panel_light,·Number) which increases in steps of 1 My original thought was do have a script run that increments both these variables (L:Panel_light_scaler,·Number)·.1·+·(>K:Panel_light_scaler,·Number)·(L:CENTRE_LOWER_panel_light,·Number)·1·+·(>K:CENTRE_LOWER_panel_ligh…

Hi, I'm trying to map ON variable and ON value fields of the TextGauge object. I wish them were able to check non only boolean A or L functions, but for example String ones. Those field work pretty good only with Boolean Vars. Is it true or I'm missing someting, the correct syntax on ON variable/ON value fields for example (I tried any kind of syntax combination without results). Thanks for your support. Regards Peppuzzo

Hi. I have two Saitek Switch Panels side by side. Had them set up with AAO as aircraft midi devices ok. I noticed the panels had suddenly stared to work with Saitek default assignments. Checking the AAO Saitek Configuration setup I found that there were four switch panels listed there with two of them set up for default assignments. I set those two to aircraft midi as well and things are back to normal but there are still four panels listed in the config. Any idea what's going on there. This is with 2.20 and the previous version. Thanks.

Hi there, Is there any way that i can use the behringer x-touch mini with AAO in P3dv5.2 FSlabs A320? The device works perfectly with AAO in my MFS2020 FBW320NX I just find a script for MFS on flightsim.to and apply a template by myselft to use but there is no script for P3d there. Can someone share their Script,Template or show me how to create a script for xtouch mini in P3dv5 FSlabs A320 please? Thank you guys!

Hello there, I made some gauges for the PMDG DC-6 (https://de.flightsim.to/file/21401/project-make-da-gauges-dc-6-gauges-for-the-pmdg-dc-6-wit-axis-and-ohs) and sometimes they won´t work or crash during the session (needles goes to zero). Then I have to reconnect with the simulator, sometimes two or three tries. Is this a known bug or might this be affected of my gauges or the number of gauges. At now I have around 25 single gauges created and one with the complete middle main panel - so 24 Gauges in one plus an indicator for the carb lever. Thanks, Michael.

Anyone know if it is possible to bring up these instruments with a keyboard shortcut? It would be mighty handy for my 2nd programmable keyboard. Many thanks in advance.

I use AAO in MSFS with almost no problems. In P3D has so far used FSUIPC. To get a more uniform handling, I plan to start using AAO for P3D as well. I started with A2A Bonanza. First I make sure that there are no settings in FSUIPC before I start setting AAO. Here I encounter a problem. When I have to set the axis for throttle, prop and mixture, it does not work. P3D does not respond at all. I have tried both with axis and event. In AAO there are the options Throttle 1, 2 and so on but not good Throtte as in FSUIPC. I have tried with A2A C172 and there I get it to work. /Thomas

I am trying to set up an xTouch to control some of the FCU controls on my airbus. Looked on here but most posts relate to the FBW A320. I have tried some of the options within AAO's but they do not work with the older airbus. Does anyone know if AAO's does actually work with the older Aerosoft bus, and whether there are any scripts available online. I have search but found nothing as yet. Andrew

I run FireFighterX_SE.exe and nothing happens (MSFS Steam Edition) Running Windows 10.0.19041.1 with Norton 360. I unzip the files and then a warning box comes up "windows protected your PC, prevented an unrecognized app from running". I run it anyway. Fire Fighter X License box pops up and press next. The FireFighterX_SE setup box appears. I press next, The FireFighterX_SE setup box appears (with the installation path). The Installation Completes. I press close. I run FireFighterX_SE.exe nothing happens. I Disable Norton 360 firewall and auto detect and tried again. Nothing happens. Help please.

New to AAO's and just experimenting with it and an xTouch Mini. Trying to program the AP controls in a default c172. I can get most settings in the AP set, but cannot get the AP Alt setting to work. The controller and AAO's are working OK as I can see the green light registering in AAO, but the control is not passing to the sim. Tried the obvious control options ie AP_ALT_VAR_INC and DEC along with others without success. Am I missing something really obvious here ? Andrew

Hello @ll, AxisAndOhs 2.20 has been released today. It should be available on SimMarket already, JustFlight should hopefully follow tomorrow. Changes in AxisAndOhs version 2.20 Main change: Offline mode. You don’t have to connect to the sim when working on templates or configs. Main change: AAO looks for the running sim process now before connecting or shutting down (this used to be problematic with MSFS for some users) Change: Exporting templates by controller Change: RPN: (SCRIPTFILE:) command Change: RPN: (CHECKLIST:) (CONVERSATION:) TextToSpeech checklist system, so you can create your own audio checklists. Change: RP…

I can't get AAO's tiller function to work with the AS CRJ in MSFS. Do I have everything set correctly here? https://imgur.com/a/ZCQTRoe

Hi Oliver, I'm trying to create a new Streamdeck profile for an aircraft. I've been able to copy buttons from e.g. the "Lorby Gauges" sample panel, and they work just fine in my new profile ... as long as I don't change anything other that the icons or title of the button. But whenever I attempt to modify the "Write event" and "Read variables" on the copied button, they're not getting saved (and yes, I'm clicking "Submit"). If I click on another button, then back to the button I wanted to modify, I can see that the "Write event" and "Read variable" have reverted to the original values. I've tried to create a Toggle button from scratch, and the same thing happens. In …

Any way to adjust Trim Speed if Im assiging it to a button?

Hopefully this is a simple question-In the "Change Axis Assignment" dialog window there is no "smoothness" setting only "filter strength." This occurs for all axes. I have the latest version of AAOs installed. I was trying to dampen the effects of the Rudder Axis--Thanks for any suggestions--

Hello @ll, if you experience the "10-degree-jump" problem with MSFS, AxisAndOhs may have a solution for that. For example the Autopilot Heading adjustment: By using RPN scripts instead of the simulator events (HEADING_BUG_INC / DEC) you can avoid the problem of the "controller acceleration" happening in MSFS: Script for incrementing the heading bug by 1 degree: (A:AUTOPILOT HEADING LOCK DIR, Degrees) 1 + (>K:HEADING_BUG_SET) Script for decrementing the heading bug by 1 degree (A:AUTOPILOT HEADING LOCK DIR, Degrees) 0 == if{ 359 } els{ (A:AUTOPILOT HEADING LOCK DIR, Degrees) 1 - } (>K:HEADING_BUG_SET) Hope this helps...

Downloaded (SimMarket/SimFlight) and installed WAMA. Fired up P3D v4 and next WAMA. I saw the new menu entry inside "Add-ons" menu. In the WAMA menu there are already set "Switch time machine" and "Movement control" both set to ON in the menu, so nothing to click here. I wanted to move now the parked aircraft on ground into a slightly different position using the appropriate keys like: Shift + Ctrl + NumPad 4 = Move left Shift + Ctrl + NumPad 6 = Move right Shift + Ctrl + NumPad 8 = Move forward Shift + Ctrl + NumPad 2 = Move back Shift + Ctrl + NumPad 7 = Rotate left Shift + Ctrl + NumPad 9 = Rotate right Nothing happened. Then I did it the old way…

I can't seem to get the Honeycomb Alpha yoke, split-trim to work using AAO. Setting it up in the software works fine, green lights when the 2 buttons are pushed simultaneously. The problem is it won't translate in MSFS for the Arrow III Turbo. When I remove the assignments in-sim, the trim no longer moves. Everything else seems to function but not the trim. Any ideas on what I may be doing wrong? thanks

AAO question. I want to apply another aircrafts config to my aircraft. But I only want to apply the assigned axis, not the buttons. Is this possible? /Thomas

AxisAndOhs version 2.12 has been sent to the shops today- Main change: Voice recognition. AAO can now use the Windows 10 voice assist system as an input device. You just type the phrase that you want to be recognized into a button assignment. PTT button option is available- Change: Added TextToSpeech capabilities to RPN scripts (you can make AAO read any text to you, using the Windows TTS system (SAPI))- Change: Improved very first left turn pickup of rotary MIDI controllers- Change: Axis can have custom labels- Change: RPN: documentation in the manual has been expanded, there are tables now, showing all commands and operations- Change: RPN: Added LISTEN_FOR_K…

I recently started using AITX, P3dv4. AITX version 3.01 b03. I really enjoy this program, there are so many things that can be done. I have not successfully generated any intercepts from the formations menu. I can add aircraft in formation immediately with no issues. The "intercept from location" is generating an aircraft where it should, but it stays in sleep mode and never initialized or moves. I have checked the constraints carefully (near an airport, fast interceptor, *.cfg file has max_mach setting). The "intercept from here" mode also generates an aircraft, but it just flies straight with no course deviation and no intercept. I have tried intercepting my …

It is possible to assign key assignments via button commands. I'm trying to map the Key Commands from PMDG DC-6 in MSFS2020--Thanks

Hello I am hoping someone can point me in the right direction to fix an issue with assigning the L/R brake axis. I just recently purchased AAO for Stream Deck functionality. Decided to assign aileron and elevator axis by AAO and liked it. Problem is when I assign the brake axis, when the aircraft reaches zero velocity I can’t move the aircraft again. By applying the park brake and releasing it the aircraft can now move once again until it reaches zero velocity. If I stop the aircraft with the parking brake and release the parking brake the aircraft can move. It is only when bringing the aircraft to a stop with the brakes that this is an issue. The brakes a…