FS2CREW: ULTIMATE GROUND CREW X

Is it possible to turn up the volume for this can hardley hear it.

Hi Brian, Sorry to bother you, but I'm a bit stuck. I'm running P3DV4.5 HF3 on a newly upgraded PC. Reinstalled everything from scratch. When I initiate a pushback sequence at the Orbx YMML V3 addon airport, UGCX (V2.6) gives a message that my aircraft is not in a parking position. UGCX Airport viewer confirms that this is the case. But in the scenery my aircraft IS actually positioned at the gate. When I shut down P3D, disable Orbx YMML, restart P3D, and locate at the same gate at the P3D default YMML airport, UGCX pushback sequence starts OK and UGCX airport viewer confirms that my aircraft is indeed at the gate. The same issue occurs at the Orbx YBCS and YB…

So i thought id use the Emergency vehicle part of UGCX but when the fire truck arrived it just sat there. I remember it spraying foam last time used it. I was using V2.0 so updated to V2.6 and still no foam. Any ideas why ??? Thanks

HI, I have noticed that despite being compatible with several simulators, it seems there is only one install of the App data folder. Will this program work in multiple simulators at the same time? I currently have FSX, P3DV3 and P3DV4 installed, and I would like to use UGCX with them all. Is this possible. I installed in to all three and a folder is created in each sim folder, but there is only one App Data folder, and only one entry in Windows Programs in Control Panel. Cheers,

I recently installed UGCX fresh, and my aircraft is on the ground, but the menu wont open because it's saying "User is not on the ground" I am flying the PMDG 737 in P3Dv5.3

Hi, I'm experiencing some weird flickering every time I startup UGCX pushback. It's this black tile as shown in the screenshot and it's flickering like hell, especially when I move the camera and it will only stop when pushback is finished (or rather I'm out of the gate on the taxiway). I already reinstalled UGCX but it still happens unfortunately. And it only happens when using UGCX. I'm running P3D V5.2HF1 (yes, not the latest version, but 5.3 is unusable for me) and UGCX version 2.6. Do you maybe have an idea how to fix this issue? Is it related to some textures? Thanks! Best regards, Martin

UGCX is recognizing add-on airport Athens LGAT But in log says airport has no runway-taxiways-parking. The airport has all 3 I have no problem with GSX or MyTraffic ect they work fine. Maybe it is reading LGAT afcad from default scenery and not addon LGAT afcad. Any solution appreciated thanks

I use P3d ver4. After last P3d update the ultimate ground crew will not work. I see it under addons in P3D but when I click it only two options are displayed. 1 Pushback sequence and 2 user define route and 3 main menu. If I click main menu the menu disapper. So almost the whol emenu is missing. What can be wrong? I have tried to reinstall UGX several times but that did not help... Here is the log file: It's a supported Flight Simulator: [11]... Hooking to the Flight Simulator's MAIN window procedure... Registering CUSTOM windows messages... Reading the INITIALIZATION file... Getting the FSX.…

Is there a way in UGCX for the tug to tow the aircraft from behind rather than push. I fly the Douglas DC3 and right now the tug drives completely under the aircraft to connect to the tail wheel and then pushes back. It really looks silly. I have been starting without the tug but I hope there is a way to do this realistically.

Hello everyone here. I'm new on the forum. I've purchased the UGCX to add some realism to my FSX. But i am facing somme issues while using it. This is why i need your help. 1. I would like to know if UGCX is fully compatible with FSX Acceleration Edition? 2 Secondly i'm getting some problem to use the "User Define Pushback Menu". The reason is that I don't have access to the "Add Waypoints". I don't know why. 3. Is UGCX compatible with default aircrafts as well as payware in FSX ? 4. I tried to run the "computer defined pushback routes" and i witnessed the ramps agents slide instead walking. How to solve this issue???? Your help would be most app…

In P3Dv5.3 I cannot get from the airport diagram viewer into the top-down view. If I click on a parking circle, as per the user manual, nothing happens.I cannot enable editing mode by right clicking anywhere in this view, because if I right click the following menu appears, there is no option to enable editing mode https://1drv.ms/u/s!AhFM6YrZMxlq1iWR7lsJ0WXNuxKa?e=F4abDJ The option "open map view in the simulation" also does nothing, it just returns me to my normal cockpit view Regards Charles

Hi, UCGX with voice working perfectly except at this stand 102 at EGKK, and only when facing West, facing East is fine. We go through the whole pushback procedure fine up to parking brakes set and then that is it, I don't get a call back that the pin has been removed and the pushback vehicle just sits there connected Here is the text file

In UGCX the follow me car and its shadow are off the ground! And it happens at all airports. Regards, Hans

I can´t figure out why my voice control isn´t working. I have read all setup guides for UGCZ voice and assigned CTRL+A in INI file, I have setup speech on PC and gone through training sessions for speech req. Interface is set to "Voice control" in Aircraft profile Settings, and since I was able to go through training sessions, I know the microfone is working and is active. I´m sure I miss something but is now blind after several hours of investigation 🙂 Are any able to give me a hint ?? Aircraft FSLABS A321 Sharklets Headset Arctis Nova Pro Wireless

Latest versions of FSL A320, P3d v5, UGCX. After a long time with no problems, once again the aircraft rears up during pushback resulting in a tail strike. This happended quite a while ago, then stopped. Now it has started again.

Has latest version 2.4, but it does not load. It does not load database, at first start Has uninstalled previous version. P3d v5.3. It is also not in the menu in p3d

Hi, I have all my voice comms set up on a 2nd client pc on the network, I have UGCX on my main sim PC. Are there any ideas how to get voice input on the client PC to be picked up by UGCX on the main PC? I have this working with Vpilot for vatsim. They have a remote and host version of their software. Thx Charles

This happens to me quite few time, when I told my ground crew "Clear for pushback, facing West", he response as: "roger, facing Northeast..." I couldn't find a way to correct him, only kill all action and wait for tractor connect again and try it again. that takes time and breaks immersion... It there anyway to just correct him before I release brakes and carry on, or I have to start it all over again?

Hi, I’ve gone back to UGCX and have a few questions. 1. I have just created a custom pushback at LIRP, Facing East. Is there a way i can just select that pushback route without the route map chart popping up? Because if i select user defined that map keeps coming up on my screen. I use a 737 Homecockpit so i just want to press a key to active my user defined pushback 2. Is it possible like i mentioned above to assign a key to my user defined pushback route without the map coming up? Thanks

Hey guys, Thanks for the release, great to see the hard work has paid off. I'm just playing around with pushback at the moment and was wondering if it was possible to tow forward during the pushback? Thanks. :)

Hi there! Have used UGCX for a long time, and recently have ran into an issue with a few airports. FlyTampa KTPA and LVFR KRDU. Both are reading a file that has a Z for airport codes (ZRDU and ZTPA). I have attempted to exclude but also excluded the main airport codes. I tried to remove the KTPA and KRDU exclusion but they repopulate in the INI. Any suggestions?

I have Version 2.4 of UGCX which I use with: P3D 5.3.17.28160 PMDG 737u FS2Crew of course AI Lights Reborn Professional V1.36.0 Recently RD Presets, although the lights came through the cockpit before I installed that. When I call for pushback, the tug appears and hooks up. Whether in daylight or the dark, the tug headlights penetrate the cockpit. They don't seem to illuminate the main panel but they do the throttles and the pedestal. Any ideas why that might be happening? I have looked through AI Lights and I can't see any evidence it's treating UGCX tugs as aircraft and so replaced your lights. In P3D, I hav…

Hello Everybody. I like sometimes use tow to parking option but in some airports is not able to find the route to the destination gate, what could be the cause? Best regards.

I recently bought UGCX and read the manuals. The manual Part 4 says to use the "OpenMainMenuKey" event to open the main menu. I cannot open any UGCX menu using that event. (Note: I don't know what version of UGCX that I am running. I can't find that information anywhere.)

Hi Bryan, is it still possible to get V2.3. Or could you provide a download link ? Too many issues in 2.4, e.g. the sparks issue. Also "Customize aircraft offsets" does not work, the X/Y/Z bars do not move in 2.4. Would like to go back to 2.3. Best regards Mike