Phenom 100 FSX | P3D

With the AP engaged, APR mode selected, the localizer and glide slope actually tracking, the PFD indicator never turns green but stay white all the way down. Known problem, or is there a fix?

For anyone who may be interested in using Flight1's GTN 750 in the Phenom 100 here is my custom panel with Flight1's GTN 750. The 750 fits nice into the MFD bezel with a click spot on the left side of the bezel for a 2D popup window. The Instrument reflections should be off to use the 750 in the VC. Here is my panel.cfg mod [Window Titles] Window00=PFD Panel Window01=MFD Panel Window02=GFD Mode Controller Window03=Toggle_Control Window04=INFO Window05=ENGINE SETUP Window06=START Window07=EFIS Window08=Flight1 Garmin GTN750 U1 [VIEWS] VIEW_FORWARD_DIR=-1.000, 0.000, 0.000 //-------------------------------------------------------- [Window08] Background_…

Is there any way to adjust the "overspeed" msg? I´ve got the boring message at only 285kts and this airplane have a cruising speed much more then this, around 371 kts in the newer versions

In other AC I have no issues with my rudder pedals and symmetric braking, but for some reason the Phenom gets asymetrically squirrely on landing when applying the brakes. I wobble all over the runway until both brakes finally settle down and brake together. Does anyone else seem to have this issue? I'm running P3D v4.2 with this thing and it seems to only happen in Carenado AC.

Hi all, I had some strange behaviour on a Phenom flight today. Couldn't get the speed above 130knts, could access the altitudes in the loaded flight plan, and couldn't seem to change altitude via AP although autopilot was following the plan. Anyone got any ideas please and also good doc on learning to fly this baby. I thought I had it sussed. Cheers

Every time I select the Phenom 100, FSX crashes with a fatal error. I have uninstalled the aircraft using windows 7 uninstall program, then downloaded and reinstalled the aircraft. NO fix. I have tried starting FSX with a different FSX default aircraft, the when I switch to the Phenom 100 FSX crashes. Any ideas? Thanks, JIm

Repaint required ... (if that's the final colours REG reported to become ZM337)

uniforms to go

Hi everyone, I had a look at the Feelthere Phenom and noted down the N1 settings for T/O and CLB during a climb from sea level to fl 330. I then did the same takeoff and climb to FL330 using the same N1 settings in the Carenado and was very happy with the results. I flew the published speeds and after cleanup set CLB power and accelerated to 150kts. After I was stable in the climb I then accelerated to 180kts by 5,000 feet then accelerated to 200kts after 10,000 feet which I flew, using VS until getting to M.55. I then finished the climb at M.55. Here is the climb table if you would like to give it a try. I rounded off the N1 settings to make it a bit easier. …

Good day guys I've just purchased the navigraph pack for the Phenom 100 from secure simmarket... and now its telling me that my serial is not valid... 404 ERROR serial not valid... HELP!!!!!!!!!!!!!!!!!!!!!!

Problem fixed. I had assumed that when I downloaded the Phenom 100, I received all the required software. However, my problem went away when I re-downloaded the Carenado Navigraph extension pack. This was always a second download purchase from Carenado. I was wrong in thinking that by downloading the Phenom 100 I had everything I needed. So even though I reloaded Navigraph latest update I did not see a fix until I re-loaded the carenado extension pack!

Hello, Today I bought the Phenom 100 together with the navigraph expansion pack for P3Dv4. However, they are not working for me. I reinstalled them couple of times. First installing the Phenom 100 and then the navigraph pack. But i get greyed out buttons on the PROC page. http://prntscr.com/hnf2x9 What should I do? Gave full control permission to my Lockheed Martin and all its subfolders... It also says that the NAVIGATION expires in 2014...while I updated it with AIRAC 1713... http://prntscr.com/hnfed5 Greetings,

Somebody who can help me with the performance in the PHENOM 100 hi, I try to follow the performance documentation that comes with the phenom but its impossible that setting the N1 that comes in the chards I reach the correct Speed. Do you follow these chards? why is fuel calculation of the Phenom 100 always negative? waht are the best numbers of N1 to cruise at the normal cruise speed?

Hi, all, Some of you may have gotten the news that Carenado has released six planes with P3DV4 installers. One of these is the Phenom 100. If you try to create a flight plan from scratch in the Prodigy 1000 you may run into a problem. The first item in the flight plan should be your departure airport. If you fail to put that in the plan, the first leg will be missing. However, when I try to do that, the sim CTD's every time. The good news is that I found a work around. Simply enter all the waypoints in your plan except the departure airport. Then when you are done, move the cursor up to your first waypoint and enter the ident code of your departure. You will find…

Carenado just announced update 2.0 for Phenom 100. Compatible with FSX-SE and P3Dv3, now also includes Navigraph Extension Pack (optional, for one week at $ 4.95): I don't have it, but I hope they will soon release v2.0 for the Phenom 300 as well. Here is the changelog: UPDATED to VERSION 2.0 AND NAVIGRAPH EXTENSION PACK!!! CARENADO E50P PHENOM 100 HD SERIES FSX/P3D IMPORTANT: -Customers should retrieve a new serial entering to their accounts at www.carenado.com - "My Products" section (old serials are no longer valid). ... New Version (2.0) - P3Dv3 and Steam compatible - Improved Autopilot behavior - T.O. config implemented - G1000 improvements - XPDR different…

I just purchased the E50P Phenom, and the Navigraph extension pack. I have a Navigraph subscription, and I used the FMS Data Manager from Navigraph to install AIRAC cycle 1713 into what I hope is the right location. On my system for FSX-SE: E:\Program Files (x86)\Steam\steamapps\common\FSX\CarenadoNavigraph\Navigraph\NavData\Proc How can I tell if the model is actually using this data? The splash screen for the G1000 Prodigy has some static text which is obviously not current. the AUX page for System Status shows System Software Version 0719.09, but the Aviation panel shows Cycle 0611, Effective 26-MAR-16, Expires 23-NOV-16. Are these just dummy dates? [They don…

Is there a list of offsets I can use to assign switches to? I can do the nav, beacon strobe lights, but like the taxi/landing lights I have a 3 way switch. When I try to assign off, taxi, landing, it doesn't work. Also some of the other switches don't work. I have 2 usb boards with 20 spdt and 10 3pdt switches.

As stated Nice flight KABQ - KMYF FL320. Stalled it once climbing out around 22K Has set speed to 150Kts and 1850FPM VS. quickly killed AP dropped nose and sorted it out. But....I noticed the throttles on my A/C only go to 89% ???? I have many Add on A/C and this is the only one with the physical joystick throttles wide open the VC cockpit throttles only go to and read 89% ??? Prefer light twin GA props and I don't fly Jets often. I planned the flight in FSX so the flight plan was already in the MFD. ( so no fiddling with those worriesome carenado knobs) AND I use the GTN 750 popup on another monitor just easily copy fltpln to it. You can turn off the copilot PFD an…

Hello, have purchased Phenom 100 for P3Dv4 I have start ted engines, Switch battery and Generators to on. i can not activate the G1000. i press the ent key, but the Startup pic did not gone. also i have no electrical power on Com to communicate to ATC. when i Switch on "reversionary" in my left horizon, then i can see, the batterys work ok on 24V. whats wrong?

Hi there Wondering how to do a backcourse ILS approach with the Phenom100 G1000 in autopilot when there appears to be no BC or REV button the AFCS autopilot console. Got myself into a pickle when PF3 ATC decided to vector me into Pago Pago International on RWY 23 when the ILS is on RWY 05. Thanks if you can help.

Hey , Last night I bought the Carenado Embraer Phenom 100 for P3D v4. After i bought it i installed it in the normal way. Than i wanted to create a flightplan from KSFO to KLAX. So i went to the FPL page and type in my departure Airport. But now when i´ve clicked on enter my Flight Simulator is broken down i tried i many times but everytime when i clicked on enter P3D doesn´t work anymore. I hope you can help me. Regards Sven

Hi all, In the middle MFD there's a text stating that the spoilers are off. Are there spoilers on a Phenom 100, and if so, how can you set them?

I recently had to reinstall FSX and all my purchased aircraft, airports, etc. When I reached the point of reinstalling my Carenado aircraft, I could not install the Hawker 850, Phenom 100 and Phenom 300. All the Carenado aircraft that do not require a serial/license number installed fine. With each aircraft that required a serial/license number I get a "403 ERROR The number of installs for this Serial Number has been exceeded". I purchased all the aircraft from PC Aviator and downloaded them again from their website, but they will not install. I get the same 403 ERROR when it's time to log onto Carenado's computer to verify the purchase. I have submitted a Caren…

http://cmtemariohenrique.wixsite.com/flypaintbrasil http://cmtemariohenrique.wixsite.com/flypaintbrasil/carenado-phenom-100

Hi, When using the Phenom 100 V2 in clouds and fog with the landing lights ON, from within the VC strange artefacts that appear based on the landing light beams can be seen. All external views in poor visibility show normal looking landing lights, and in normal benign flight conditions, the landing lights appear as regular beams from within the VC. W10, FSX:SE, 980Ti V368.61, same whether DX10 on or off, aircraft removed and reinstalled but issue remains, all other Carenado aircraft are OK. Is anyone else seeing this landing light effects? Thanks, Fabio https://www.dropbox.com/s/koq5zdgi1rd6lb8/Good%20vis%20ground.jpg?dl=0 https://www.dropbox.com…