B1900D HD Series FSX | P3D

Folks, post a repaint request with an image that YOU DO NOT OWN, and you will be suspended or worse. I have already done that with one person today. Please obey the Terms of Service you agreed to in signing up here regarding copyrights. Provide a link to the image you want to use; that is the proper method.

I use to start the sim in direct mode (SHOW_SCENARIO_WINDOW=0) with a saved flight file as command line parameter. This works fine with all my planes exept with the Carenado B1900D I just bought. The simulator crashes just before usually the window would appear that tells now to load terrain data. No error message at all, just return to desktop. If I start P3d4 with SHOW_SCENARIO_WINDOW=1 and load in that window the saved B1900D flight file it works fine. I tried a start with ContentErrorReporting=1 and I got an error file with 790 errors from the Carenado B1900D. Now my questions: - Are there too many errors? - Are there some errors that P3D4 cannot ignore? …

Will the B1900 be upgraded to XP12?

Decided to try the Carenado B1900D in P3Dv5 and while I can see the gauges in the VC, the inside of the VC is transparent. Is there a way to remedy this?

Thinking about getting this bird for P3Dv2. Can anyone confirm successful integration of the Flight1 GTN750 into the VC? Thanks!

I hope that Pineapple Air and Sky Bahamas might be painted on the B1900D! Pineapple Air : http://www.airliners.net/photo/Pineapple-Air/Beech-1900D/1646116/L/&sid=23a8ca2a1567c23e519a212e2719edb2 Sky Bahamas : http://www.airliners.net/photo/Untitled-(Sky-Bahamas)/Beech-1900D/1648458/L/&sid=790f25fa4fb814d86eb729fd73128b2f

I had several "x plane has stopped working" with x-plane 11.02 flying the new carenado B1900 for xp11 and noticed in the log file this error warning: WARNING: texture Aircraft/Extra Aircraft/Carenado B1900D_XP11_V1.0/objects/I1_NML.png has a size that is not a power of 2; it may not render correctly. It's probably not this texture that caused the crashes as it fly normally most of the time but i thought it was worth mention it.

Pardon me if I posted this in the wrong forum. I couldn't fine a carenado b1900d support forum for xplane 11 here. I recently purchased this product for xplane 11, and my question can be related to my inexperience with the aircraft. This is my issue: The autopilot is behaving irratic. When I set the heading bug straight ahead and engage the AP in hdg mode, the airplane turns about 90 degrees to the left or right of my actual heading. It's like the visible heading bug and the actual bug that is read by the AP are 90 degrees apart. When I set it to NAV mode and set the garmin unit to GPS, the ap seems to be steering towards something, but it's certainly not the gp…

recently I purchased the carenado beech 1900d for fsx but seem to not be able to fix the cockpit being see through does anyone know anyway to solve this? thank you in advance

I'm new to this plane. I have it pretty much figured out except for the cabin pressurization. For FL200 I set the cabin controller knob to 20, which should result in a cabin pressure of about 2,700. After engine start I switch the bleed air valves to open. At some point the differential pressure warning light on the upper annunciator will go on. Raising or lowering the target pressure doesn't help. What am I missing?

Hi, I have loaded a flight plan using the P3Dv4 flight planner, and can see the plan in the Universal FMC. If I try to add extra waypoints enroute, sometimes it works ok, sometimes it doesn't. These exist in P3Dv4 as I can add them through the default flight planner without issue. An example is the RWY NDB at EGNS. If I enter RWY and press enter nothing gets added and the plan is unchanged. I have also had this happen with various intersections. Any help would be appreciated. Regards Phil

I have had the aircraft for a while but only done reasonably short flights in it. However today I did a flight of over 600 mikes. To manage the fuel how do I use the tank system. Do I just stick the Auxillary pump switches on auto and it will drain each tank in turn or is there a procedure. If there is I cannot find it in the documentation.

Long time on/off user of Carenado's B190D for short flights. Was wondering if anyone is aware of any flight model updates, user made or Carenado's, that would make the B190 more realistic to fly. Haven't flown a B190D in real life, but I have other aircraft and it's difficult to imagine the B190D flying for real like the Carenado's simulation. Unfortunately I don't know how to make FDE changes, otherwise I would've done it. It's unfortunate Carenado doesn't maintain their products and we have no other source of similar products. Dave

In the normal procedure it say to remove control locks how do I do that Thanks, Alfy

Nothing spectacular, only two repaints that have been requested a lot. HI1017 Download

I've created a tomatoshade profile for the Carenado B1900D. You can download it below. Download Here. I've also created a profile for the Carenado S340, which you can download at the same link.

Hi guys, does any one have the above named aircraft and have any idea how to ident on the transponder? cause in main only goes on or off. Merry Christmas to all Manuel

Found it under my account at carenado.com Downloading it now...

Just got this aircraft - like it mostly, but first time trying to start up and enter flight plan data, I see "Loading Data Base" showing on FMC and never going away. I have latest NaviGraph data in proper folder.(FSX\CarenadoNavigraph\ Any ideas. I will try Carenado help next. Dave Hinson

Hello guys, I was wondering if someone made a mod to get GTN 750 working on 1900D, like some did with the PC12 ? It would be great.... Let me know please ! Regards, Siklid

Hi, I have a fresh install of P3D v4.3, and now find the parking brake handle in the VC of my B1900D does not move. The actual brake effect is working properly, but without movement of the handle it is sometimes difficult to know if the brake is applied or not. Anyone else find this? Regards, Jim

Has anyone here be able to create a module for this plane with LINDA and would like to share? I have been trying to get some my hardware (switches ) to control some the lights but don't have much experience with LINDA or Lua.

Has anyone seen repaints that work with P4Dv4 on the B1900? Carenado's only go up to V2 i think...

The AC Bus Switches have 3 modes: ON, OFF and TRANSFER. Can anyone tell me in which situation I need which mode? Is it correct to turn both AC Bus Switches to ON as soon as both engines are running and both generators a ON? I would be happy on any information you can give me von the AC Bus and it's switches.

I've tried a flight from CYYZ to KMDT using VOR navigation. YYZ was set in the NAV 1 position (GPS radio) and DKK for the first VOR along the way set in the NAV 2 radio. Course was selected from YYZ to DUSOM and VOR1 showing active in the EFIS and course was selected properly. After engaging the Autopilot, the plane would not keep on course. After the course indicator moves either to the left or the right, the plane keeps heading in the direction it was going and doesn't correct for going off course. Then I tried setting VOR2. DKK showed in the EFIS, course was set properly to intercept the VOR and again the plane would not correct course to head for the VOR. VLO…