SR22 GTSX Turbo HD Series for FSX | P3D
85 topics in this forum
-
Apologies for what is probably a very basic question, but how do i get FSX ATC to use a callsign for this plane all I get is ", cleared to land" etc. Thanks in advance Mat
-
- 6 replies
- 2.8k views
-
-
Hi all, I have this and really like it, Is the a way of changing the steering to behave as my other aircraft do, turning with my rudder input while on the ground? I understand how i should work but would rather change it. Any help would be great. Neil
-
- 0 replies
- 1.6k views
-
-
Clearly I'm insane... After complaining about the lack of a paint kit and the time investment it took to line up lines and curves on the 2012 SR22 Turbo repaints I did, I came back to do another. I swear this is my last but something about the current 2013+ Carbon appearance package caught my eye. Net investment on this was a bit less but it still was a several week ordeal and I'm b-e-a-t. But, not before I pass it along to anyone who is interested in making her their own. Hoping to wrap up and upload soon. First out of the blocks will likely be N804KC - a December 2013 production date SR22T that was used as a factory demonstrator for the first part of 2014. Pictured belo…
-
- 8 replies
- 6.5k views
-
-
Hi: Is there a way to tell if I've installed 2.0 correctly? I just want to make sure I have the latest version. Thanks!
-
- 0 replies
- 1.3k views
-
-
I have installed the new version 2.0 of the sr22. I can not seem to get the IAS function to work. The manual says " IAS key- either ALT or VS should be on. I have found that if I turn on the IAS button, it turns OFF the VS or ALT selection. In fact pressing the IAS causes the plane to lose control and start a step climb. I have it trimmed out before pressing the IAS button. Bottom line it either does not work, or I do not understand how to use it. Any one else see how to use this function? Thanks, Jim
-
- 7 replies
- 2.5k views
-
-
CARENADO SR22 GTSX TURBO HD SERIES FSX/P3D UPDATED to VERSION 2.0 CARENADO SR22 GTSX TURBO HD SERIES FSX/P3D UPDATED to VERSION 2.0!!! New Version (2.0) - P3Dv3 and Steam installation options. - FLC added - 2D autopilot added - IAS mode adjusted to the aircraft´s POH - 3D knob technology improved. - Lights enhanced. - XPDR different modes added - G1000 enhanced - GCU enhanced - Pitch/IAS wheel animated - Chronometer added to the ADF - On/Off button working on ADF - G1000 minor bug fixes. - Minor bugs fixes Customers should uninstall the aircraft before installing this new version and then download the package again from the link provided. Downloads were increa…
-
- 4 replies
- 2.3k views
-
-
-
can mods delete this? I missed the topic being discussed already .
-
- 0 replies
- 1.3k views
-
-
Will this work in P3Dv3.2? Got a lot of Carenado / Alabeo birds, anybody know which ones install / work without issue in P3Dv3.2? Many thanks, Capt P
-
- 1 reply
- 1.4k views
-
-
Hi all, The Keypad in the vc isn't work so unable to edit or create a flight planin the SR22, Any Ideas?? Thank You, Neil
-
- 0 replies
- 1.1k views
-
-
Hi everyone ! I've always loved the 2015 Platinum paint scheme, so I've decided to make something with my brushes :^) They are not perfect, thanks to my painter skills are not awesome and this painkit is a true nightmare, but I've tried to make my best ^^ This package contain 4 liveries : SR22T G5 N45AH (I made a mistake on the Aircraft.cfg for this one, it's the N9AH who has been re-registered as F-HNXT) SR22T G5 N511MC SR22T G5 N55CQ SR22T G5 N718TL You can download the package by following this link : http://www.mediafire.com/download/1ea47e8w3x71ina/SR22_Platinum_2015_Package.rar Blue Skies ! =D
-
- 1 reply
- 2.9k views
-
-
-
Evening: I need some advice/support please with GA A/C and ASN SP3 turbulence. Lately I've been trying to fly around in the Carenado SR22 however the airplane frequently becomes completely uncontrolable. I'll start pitches almost at 10,000 ft/min; sometime the airplane lands up at 30,000+ ft. I am positive enhanced turb. is unchecked and the rest of the ASN settings are all down around 1% - anything lower and I won't have any type of turb. which is no fun and unrealistic. Except for 0%, the aircraft complete over reacts to the turbulence. Thanks
-
- 3 replies
- 1.5k views
-
-
is there a way to add copilot or front seat passenger and backseat passengers to the SR22?
-
- 0 replies
- 1.2k views
-
-
Just purchased the aircraft on 6/29/15. The download and installation appeared to go smoothly, however when I open the aircraft, I don't see the aircraft textures at all, just the pilot figure and the windows. I'm running an Alienware system with Windows 8.1 installed. Any ideas? Thanks in advance.
-
- 1 reply
- 1.7k views
-
-
Has anyone had success installing the mindstar g1000 into the carenado sr22?
-
- 0 replies
- 1.4k views
-
-
After the huge disappointment with the T182T, I decided to not buy the SR22. However the "FPS-patch" has completely transformed that plane for me. How is the SR22 after the latest patch? Worth getting for $35?
-
- 9 replies
- 2.7k views
-
-
I just started messing with the SR22 again and I'm trying to figure out all of the features Carenado has included in the G1000. I'm doing well, but cannot for the life of me figure out how to get back to the map page once I enter a flight plan, approach, etc. I'm getting stuck on the info page and nothing I do seems to bring me back to where I can turn the FMS knob to get back to the moving map. I have ran across a few other posts where people were having the same issues but haven't been able to find any solutions. Darrell
-
- 0 replies
- 1.8k views
-
-
When the SR22T came out several months ago, I thought to myself "I'd love to replicate the paint for a 2012 SR22T model..." Little did I know that it would be a several-month undertaking (my original edited files are dated from March). Of course, I've picked it up and put it down several times over those months but I'm finally to a point with it where it's starting to "gel". Still several details to add as well as a re-reg or two but it's getting closer. It's not quite a Gen 5 but I like the look. Again: Still very much a work in progress... but I hope to have it available in the coming weeks!
-
- 11 replies
- 4.1k views
-
-
Hey I request for the N916LJ https://www.flickr.com/photos/chrisk48/8133545873/sizes/l http://flugzeugbilder.de/show.php?id=1241125 N102SR http://jetphotos.net/viewphoto.php?id=7872312&nseq=81 D-ETRM http://jetphotos.net/viewphoto.php?id=7872290&nseq=82 The VH-OLS 2013 world record attempt by 19-year-old Ryan Campbell to become the youngest pilot to fly solo around the world. http://www.aviatedownunder.com/VH-OLS.jpg Best regards Chris
-
- 0 replies
- 1.6k views
-
-
What I have noticed with Carenado's SR22 is that the initial frame rates are very good. However with about 3-5 minutes into its use, the frame rates drop to single digits and the aircraft is unusable. When I switch to a different aircraft in the menu, the frame rates shoot up. I am using LM Prepar3d V2.1 but had the same issues with FSX. My system should be able to handle the load so I suspect that this product, Carenado SR22, has a major flaw. My system: i7 4820K @ 3.7 OC to 4.4 16 GB RAM Win 8.1 1 TB SSD
-
- 1 reply
- 2.3k views
-
-
Hello All, Does anyone know a trick to add LED strobes lights to the SR22, or even just slow down the lights it has now to make it pulse instead on blink so fast? Thanks, Jason
-
- 0 replies
- 1.7k views
-
-
Bonjour, I could not find how to adjust the ADF value. Please could you help me ? Thanks for your reply
-
- 2 replies
- 1.9k views
-
-
-
I think the lean assist feature could be more informative then what it is like for example have best power display on the engine page with the TIT bars turning blue when Peak and best Economy is reached instead of the triangle and the plus or minus for lean of peak and rich of peak
-
- 2 replies
- 2.7k views
-