SR22 GTSX Turbo HD Series for FSX | P3D

Suddenly my Carenado SR22T has an out of scale MFD in the VC. Pop-up is fine, but VC only shows the top left corner of the screen. The frame around it is fine but the electronic screen is magnified about 4X and only shows the top left quarter. Have looked in the panel.cfg file but cannot find anything obvious.

Hi, I am new to this plane... I try to start it via ctrl-E, via the shift-7 and via the Normal Procedures, but no luck. All I see is some smoke black and white and after a few moments the engine stops. The mixture lever seems not to be functioning (saitek with SPADneXt), although with ctrl-E it it should come in the right position. The elevator isn't working either. All other control surfaces are ok. Anybody? Thx Paul

after watching "Flying with Rich" latest episode about the limited edition cirrus, he stating that this is the best selling general aviation airplane in the world. so I was happy to jump and try it out in the simulator. bad call I switched from A2A Comanche which is an awesome add-on albeit a little tasking in fogged in Alaska. this Carenado sr22 is a complete junk, it's full beta, simply not a release ready product. The CDI in GPS mode does not work does not show the right screen stucks and does weird things all the time like buttons not working as 5 minutes ago or stuck in weather mode and unable to bring back the main map. alphabetical keyb…

Hi Guys, when I started from cold and dark and turn on the left BAT- switch a beep appears, coming up in loudness and frequency until, let’s say to an 8 to 10 kHz tone, just as a rotating noisemaker. If I switched it off again the beep goes down in frequency and loudness in the same behavior as it comes up. I checked the cooling fan switch on the right side, but no effect. This beep is even there when I started with running engine, and it dominates the engine sound significantly, which is very nervous to my ears. Curious behavior is that it keeps staying even when I - pause the simulator - load another aircraft for around 20 sec during the new aircraft is…

SR22 v2.1 HSI/CDI Fix for SVS and Non-SVS This fix addresses the issues in this thread: I have included to separate versions of this "fix" depending on whether SVS will be used or not. Both are for version 2.1 of the Carenado SR22 GTSX Turbo. If you do not own or use the SVS, use the non-svs version. The reason is that the SVS has a bug that cannot be fixed without halving the frame rate of the SVS. The installation method that I am using does not overwrite any files and can be easily undone if needed. If you do not want to edit any files, rename the panel folder from panel.fix to just panel and replace the files in your install directory. …

This panel fixes the out of sync PFD and replaces the MFD with the F1 GTN 750, and is for version 2.1 of the Carenado SR22 GTSX Turbo. For the MFD, the first soft key will toggle the trim/engine tab on the sidebar. The second (from the left) activates direct-to on the GTN unit. The right arrow button just below the Nav dial will open the 2D GTN. The default MDD has been disabled as it causes major issues with the link to the PFD. The installation method that I am using does not overwrite any files and can be easily undone if needed. If you do not want to edit any files, rename the panel folder from panel.gtn to just panel and replace the files in your inst…

Finally finished! :lol: In the coming days, I will be uploading four new paint schemes for the Carenado SR22T. These represent the factory schemes available for the real 2012+ model year SR22T's with the Carbon appearance package. These FSX/Prepar3d versions are the culmination of a repaint process I've been working with on-and-off for over a year and, IMHO, offer a great "refresh" of the visual appeal of your Carenado Cirrus! Here are the paint schemes I've chosen to represent: N130MH - 2013 G5 SR22T GTS, carbon package, carbon gulf scheme (Sterling silver overall with Gulf blue. Black and carbon fiber accents) N522PK - 2012 G3 SR22T GTS, carbon package, carb…

Hi, I'm really confused about the Carenado SVS system and I’ve read in loads of places that its tricky to get working. We here’s what I’ve tried so if anyone could suggest something else that would be great, if not I’m not sure what my chances are for a refund from Just Flight. My test aircraft is the Cirrus SR22 v2.1 in P3D V.4 which I believe is SVS compatible. I know to push to softkey to get it working 1. Installed the SVS.exe straight away – failed to show in PFD 2. Uninstalled SVS and SR22 - failed 3. Installed SVS then SR22 4. Tried SVS.exe in SR22 directory and that just reinstalled SVS - failed 5. Opened TCP port 4444 in …

On the SR22 v2.1 update with Synthetic Vision the gps is not showing on the HSI/CDI display correctly in the virtual cockpit (always points to 000). The odd part is that it show properly in the 2d Panel view. Edit: Actually there seems to be a complete disconnect between the left and right panels. No flight plan or path is shown...

Anyone having any luck with Synthetic Vision working with P3D V5? All the keys show up but nothing happens when they are pushed. Same results in Cessna 182.

Flying the SR22 & SR20 in real life and flying this plane on the sim really offers the opportunity to keep my skills sharp to a point. I have submitted support tickets to Carenado to make subtle improvements to the airplane especially related to PFD/MFD functionality. Seeing the X-Aviation TBM 900(X-Plane) is such a wonderful representation of the Garmin. It would be great if Carenado would find some time to refresh this airplane - potentially to the G6 iteration. Do you agree?

With a GPS FPL active, what is the sequence of keys that will activate a particular leg of the FPL? Thank you

Has anyone made a more accurate PFPX profile for the SR22 PFPX has one but it won't work

Firstly, the aircraft looks magnificent but I’ve encountered issues which I don’t know how to correct. The PFD of the G1000 is not communicating with the MFD or visversa. This is a nuisance as when you open the 2D panel of the PFD, all works properly. This issue is with or without SVS installed. The SR22 is meant to have a ceiling of 25000 ft with cruise speed of around 185kts. I’m lucky if it reaches 10000 ft with VS of +500 engines thrust set at 100% and struggling to maintain 130kts. It would be greatly appreciated if I could obtain some advise on how I can get these problems resolved. My other turbo props have no problems reaching Altitude ceiling and c…

hello Carenado SR22 GTSX TURBO HD Rudder No Move Turns Taxi :mad: Please Edit Aircraft.cfg Help Me Thank You.

Simple question: Is the Carenado SR22 with G1000 compatible with Navigraph? P3D/ V3 Rgds Sander

Hi, Anyone experiencing the TER GER annunciation on the SR22 P3dV4.2 I did see a mention for the C172 https://carenado.zendesk.com/hc/en-us/articles/115003010854-C172SP-SVS-TER-ERR. I could not find that gauges/Carenado_WebSimConnect folder so I am guessing the file structure is different.

Hi folks Does anyone have any ideas on how to set up LINDA with the Carenado SR22 to use a knob on my throttle to toggle the fuel boost pump on and off? It's something I do natively in the real aircraft without looking at the switch so should be able to code a hardware button? Mike

Hey guys I have the Carenado SR22, and everything almost works. The panel lights works, but when i turn on cabin light it goes to the on position but the light does not turn on.

Hi all, Anyone managed this yet?? If so please send info about how to please. Neil

Can someone share a new air file for the SR22? This is a beautiful airplane for p3d v4, but the FDs needs some tweaking. Thanks.

Will the SR22 be made compatible for P3D v4 by any chance?

I want to put the Mindstar G1000 in the SR22. With RXP GNS530 I can simply replace the CAR GNS530 gauge with the RXP gauge. Is this possible with this AC. Off topic a bit but I want to do the same thing to the New C206 and C208 G1000 equip AC. Again possible? I assume if I can do it with one Carenado AC I should be able to do it with all of them... Thanks Tom

Is it my setup or does the altitude adjustment knob does not work in this aircraft? Shez

Hi everyone ! Few years ago, I've started a repaint of N551JW the "Vision Jet Inspired" Sr22. (on this topic : http://www.avsim.com/topic/449427-sr22-generation-5-carbon-repaint-any-interest/) Due to my studies, few IRL troubles and my CFI job, I had to give up Flight Simulator. But she's now ready to be delivered to you, Cirrus enthusiasts B^) ​ ​ You can download the repaints by following this link :http://www.mediafire.com/download/p3ob78xh3t1zw5v/SR22+-+Vision+Jet+Inspired.rar Happy Landings ! Clément