DX-10 Discussions, Hints and Help

Am I going crazy or what? I would swear there was dx10 setup guide here on AVSIM but I can't seem to locate it. Anyone?

Hello DX10 fans, what do I have to do if I would like to try out DX10? Get Steve's fixer, and flag the DX10 in FSX? Is it correct? My add ons are: GEX, UTX, ASN, REX for runway lights, FEX for clouds at 1024, and a small number of add on airports, that's it. I almost forget: I fly pretty much PMDG liners. Any suggestion will be much appreciated, as I know pretty much nothing about this, Enrico :smile:

Hi All, I'm using Steve's retail DX10 fixer and FTX global / North America and I'm getting the occasional group of black blocks where buildings should be. Anyone got any ideas as to how to fix it? TIA DK

Hi guys, I've got FSX + Acceleration. Ever since upgrading from Windows 8 to 8.1, the checkbox to enable DirectX 10 is gone. I'm running the newest driver and I've got all the updates. Any ideas?

Hi, i have a problem, i can't run dx10 with two graphics cards :angry: , but it work with DX9 My configuration : - the gigabyte GTX770 4Go : - the number 1 on picture, the main monitor - the Gigabyte GT610 : - the number 2 on picture, the "accessory" monitor (wx radar from reality XP, VOX atc and FS2crew) - the number 3 on picture, the monitor CDU from plug n fly This configuration work without any problem on DX9, but i switch to DX 10, i can't have fullscreen! I start fsx in windowed mode (dx10 with muliple monitor technique), after start completed, when i switch to fullscreen, the "fullscreen" take just the half ce…

Hey guys, So i love DX10 at the moment except for 1 small problem. When im using water settings in the 2X ( Low 2X, High 2X Ect ) It seems that when the sun is reflecting of a certain bit of water it goes purple. From a distance when you look to where the sun isnt shining down onto the water is a perfect looking Blue! I can attach a screen shot if you like. But does any one know how i can get rid of the Purple water textures with the water settings on any of the 2X. Im using Rex 4 For textures and Active Sky next I dont know if that would have anything to do with it ? With STeves DX10, is there a setting i can adjust in there ? Kind regards and an…

Need some help with stutters and not sure what to do for it. You can see my PC specs on profile, and I have setup pretty close to Avsim guide and DX 10 guide. Use DX 10 fixer. Everything else is really good no blurries, FPS lock at 30 and stay in the high 20's or right at 30. I'll post cfg file and I can give any other info if needed, Thanks. [sOUND] AmbientUIMusicVolume=-6.000000 SOUND_FADER1=0.390000 SOUND_FADER2=0.500000 SOUND_FADER3=0.790000 SOUND_FADER4=0.670000 AmbientUIMusic=FSX01 SOUND=1 SOUND_QUALITY=2 SOUND_LOD=0 UISound=0 AmbientUI=0 PrimaryDevice={DEF00000-9C6D-47ED-AAF1-4DDA8F2B5C03} VoiceDevice={DEF00002-9C6D-47ED-AAF1-4DDA8F2B5C03} [bufferPools] UsePoo…

I know this has been talked about here but I am wondering if this is part of the same problem in DX10 with ai lights or if I missed a setting in DX10 fixer. I am seeing lights not lining up on PAPI, double lights on ai traffic one on top wing and one on bottom of wing, and double taxi lights on taxi ways and they are higher than they should be. The double lights usually one is brighter than the other. Thanks for help.

Hi all, Just to go into a bit more detail than the title, i get a funny white flash in the water (and only once) as soon as i start turning the trike when i load the default flight. Then, some of the ground scenery flashes black and stuttering starts...all while my fps remains a constant 30. I've noticed a big stutter as soon as i flew over the airfield to land. On a separate test, I load up the ngx737 at the uk2000 EGBB (birmingham), and it works wonderfully apart from some horrendous stutters still with a good and constant 20fps. It's really frustrating as i'm sure it is something simple, well hopefully something simple and wondering if anyone has had simi…

Hey there guys, As someone who only recently fully committed to DX10 (I dabbled before), I've been loving it thus far. However, I've come up against a VERY annoying problem with my DX10, FSX setup. Take a look: The glass of the cockpit as this weird texture covering it and I've tried but I can't find it anywhere in the panel folder for the aircraft (POSKY 77W btw). Anyone got any suggestions?

I recently purchase DX 10 Scenery Fixer and all I get is a black screen on "Free Flight" aircraft preview and after launch the screen is black FSX "not responding"' I do not have SweetFX or ENB, FXAA is not enabled in NI.

Is anyone else having issues with gauges showing up very bright, so bright as to not being able to see them in F1 ATR 500 at night with Steve's DX10 latest version? tony

just a really quick question, because I seem to have read some conflicting answers on this topic. 1. Does the software change the fsx.cfg to Highmemfix = 1 2. Will it fix the problem where taxiway light stanchions appear as black squares? Thank you again for any help rob

I just bought a new pc with the following components: 16 gb quad channel DDR3 at 1600 mhz I7 4930 processor overclocked to 4.1 ghz and 16 gb of ram I loaded FSX Acceleration FTX Global FTX Vector Latin VFR KMIA Taxi to Go KMCO I made the HighMEM fix and I purchased to Steve DX10 Fixer, but for the most part made no changes with it. In both DX9 and DX10, when I taxi around an add on airport or a generic airport, the runways and taxiways look like they are vibrating. Even as I sit next to the runway, the solid lines take on the appearance of striped lines, not solid lines. Note that when flying over the add on airport scenery at 1000+ feet, the ima…

Hello all, I recently purchased another monitor and a GTX680 to utilize a triple monitor Surround/Eyefinity setup. All was well, until I saw the rain. Wow! What an awful effect. And, furthermore, the rain graphic was not nearly filling the entire drawing surface at certain angles, especially in spot view. Basically, it looks like the rain effect is very simple. FSX simply draws a transparent cylinder that is always transformed to screen space. This cylinder is textured with a repeating series of small rain textures which are scaled lengthwise to the rain intensity as well as moved along the surface of the cylinder a bit each frame. FSX then rotates this cylinder b…

Maybe someone can help.. When starts up default FSX flight planner - FSX takes about of 400 VAS also even im not load a flight.. example: Holding at gate- clicks flightplanner and return immeatly again, without loading a plan. .I miss 400 mb VAS???

Hi, I have Steves latest dx 10 fixer and in there is an option to change the color of the axis. I have tried to change it in fsx and it doen't work. I would also like to know if there is any fix to change it back to red in P3d ver 2.2 . Does the fixer work in P3d ver 2.2 Thanks Nelson

Hi, OMDB was working perfectly in DX10 yesterday. This morning I loaded up the sim and the PAPI lights are just big red squares. So, I did some research and removed the papi lights - Have also noticed the runway lead in lights are black squares. Anyone know what could have happened? My settings in the DX10 controller are the same, only thing I recently changed was the shadow settings for the flight deck. Thanks

Thanks in advance for your help: I am runing FSX with Dx10 and with majestic Dash8. Since some days ago, when I turn the view to left or right and maintain this position during more than 5 seconds, screen goes to black. If I back again the view to front, screen recover as usual. Does anyone know how can I fix that? Thanks

I am new to the DX 10 in FSX. I just updated from Windows XP which was DX 9.0c and had/have a DX10 video card (ATI 4650). Now I still have the same video card but with the Windows 7 Home Premium, there is DX11 on the computer. My question is why does my scenery look so bad and shake when I select the New/now DX10 box in the FSX menu? The scenery looks great with the box un-selected and the FPS stays pretty much at 30 FPS. When I select the DX10 box the video looks real bad and the frame rates tank. What mode is the program running in? The box says FSX is a DX9, the video card is a DX10 and the Windows 7 is a DX11. From looking at several pages of this section, i…

I have been using fsx with hyper threading on my i7 turned off with dx9. I changed to dx10 and didn't change it but had lots of stutters bad frames and all the problems that people have been reporting. I do not over lock but I have affinity mask set at 255. Maybe worth a try if you are having performance problems.

I am new to the DX 10 in FSX. I just updated from Windows XP which was DX 9.0c and had/have a DX10 video card (ATI 4650). Now I still have the same video card but with the Windows 7 Home Premium, there is DX11 on the computer. My question is why does my scenery look so bad/ jaged and shakes when I select the New/now DX10 box in the FSX menu? The scenery looks great with the box un-selected and the FPS stays pretty much at 30 FPS. When I select the DX10 box the video looks real bad and the frame rates tank. What mode is the program running in? The box says FSX is a DX9, the video card is a DX10 and the Windows 7 is a DX11. From looking at several pages of thi…

Hi All, I have just installed a Corsair Hydro H100i water cooler and OC'd to 3.8Ghz on an i7 920. I'm running FSX DX10 (with Steve's DX10 fixer applied) and have locked FPS within FSX to 32. In all weather I get reasonable FPS in the 20's (clear skies much higher) but if I turn on some rain it drops down to the mid teens. Any ideas as to what I can do (apart from flying in clear skies!)? Cheers DK

Can someone let me know if they are using SweetFX with Dx10 and multiple monitors? I use the PMDG 777, the FMC/EICAS etc run on a separate screen. Cheers

I has anyone tried this combination, of dx10, teve's fixer and enable Aero theme ?. Is the quality any better. I had standard in windows 7, enabled Aero theme, and got ctd on startup with level-d. Has anyone experienced this ?, any fixes ? Does Aero theme in win 7 improve the experience ? Any info, help appreciated. .. thanks... Hari