Button Control Version

Hi all, Although I use FS2Crew with the Wilco A320, I have only recently started using it with the iFly 737-800. These are only minor things really but was wondering if its just how it is or if I'm not pressing something. 3 things, all to do with announcements. 1, " Lets start setting up " gets no reply, and the same for " Out for the walkaround " and " Back from the walkaround" non of these gets a reply. Only minor I know but would have thought at least the back from walkaround would have got a response. I am on version 2.2 and have just installed but not yet run, version 2.3. Any thoughts? Cheers, Rory

Before this last update in the panel bar for FSCrew where the secondary message would show up I also had a countdown show up as well in this part of the panel bar for FSCREW. Now that I have applied the last update it is no longer there. If I run my mouse courser over the spot where that used to me it allows me to fast forward the time down as before but there is no visual numbers showing up in that spot. Any suggestions or has this been removed? Thank you, David Hawley

Hi I have just installed button version onto FSX - everything seems to work except the main button. I have assigned x and joystick button 6 to propeller de-ice on/off - nothing happens I have assigned c and button 5 to secondary and this works - tried swapping the buttons no luck, everything else seems to work ok any help appreciated Davy C

Hello, I have been using both the Button and Voice version for the Ifly very much with Ifly. Now I have been switched over to Prepar3d v2 I was wondering if I can get an installer to use with P3d. Thanks Joep

The volume of the F/O and captain´s voices are constantly increasing and decreasing. That makes me adjust the VOL switch all the time.It seems to happen since I start the engines. Any solution?I've installed version 1.1 but still have the same issue.Thanks.

Hi Bryan I just bought the bundle package for the ifly 737 fsx version and can not get the panel to open I have checked to make sure that the config manager is in the admin mode and it is I even uninstalled and reinstalled but still nothing. I would really appreciate if you would help in getting the program to work.im running windows 7 64 bit thank you Les

Ifly has updated their 737NG with some great updates. One of the updates simulates the parking break not working until hydraulics are turned on, so chocks in. I am using FScrew button and its true to life checks and turning on systems, this doesn't happen for some time as I understand, as in real word. I am also using GSX from FSDreamteam. This allows me to simulate loading fuel, food, passengers, things like that. My problem is, it wants parking breaks to be set to do this. So trying to load all these items and no parking breaks set, won't let this program work. Not sure what to do, both programs work great but not together now. Anyone have a suggestion out there…

Hello all, After arriving at gate and co pilot says "I'm ready for shutdown" crew begin to repeat previous flows. I hear hey cpt can we board, I'm out for the walk around, were all done, load sheet etc... Windows 7 64bit, Fsx everything updated Thanks Brad

goodday, I use Fs2Crew with FS9. I have following issue with the B737-800 (not with the 737-700): During the start-up flow and landing-flow the startswitches are not going automatically to "cont" No problem to do that manually, but I noticed this only. and the pilot/co-pilot still saying "auto" ofcourse. is this a bug in the program or is this something else I missed...?

Hi Guy/Gals, I just bought the button version for FS9 and when i load up my 737-800 it jumps all over the place dragging its tail but when i load up the 737-600 it doesn't jump around the place. Any suggestions? Thanks

Hi all... Sorry for possible offtop, but i search a music composition used in Ifly 737 promotional video... Anybody knows how it calls? Thanks for any replies

Hi there, FS9 with FS2CREW Button just crashed on me in-flight, after starting the Descent checklist. See the crash report below. Didn't have this prolem in a previous flight on the same day. However, I installed the newest version update 2.2 on top of update 2.1 after this fligth, which might have been the issue?! Just now I reinstalled FS2Crew incl. the most recent v2.2 ontop without the 2.1 update, but I still need to check whether it works again. Any ideas about the issue will be highly appreciated. Cheers, Andreas Faulting application name: FS9.EXE, version: 9.1.0.40901, time stamp: 0x4135a208 Faulting module name: FS2AUDIO.dll, version: 0.0.0.…

I recently replaced my SB x-Fi extreme sound card with an SB Audigy 24-bit. The "new" card is actually older than x-Fi but rock stable with no static/crackling etc. I also started using SB Tactic 3D wireless headset and have had no problems with FS9 except that when I attempt to start iFly737 button version by clicking on the standby ADI--I get immediate crash of FS9 with no warning boxes. I tried uninstalling/reinstalling FS2Crew from the basic V2.0.0.39 to the latest version, and it still gives me a CTD everytime. I had an issue similar to this with the SB x-fi extreme sound card when I updated the audio drivers...if I rolled back to the original drivers, FS…

Version 2.2 is now available. Please see the Change Log here: http://forum.avsim.net/topic/401789-20-may-2013-fs2crew-ifly-version-22-released/ Best,

Goodday, I was wondering the following: I use FS2Crew for the iFly 737 (button control) since several months with very good results. Now I'm searching for a MCP and maybe EFIS panel for more realism. But during the flow and after take off the FS2Crew/FO pushed (virtual) i.e. the FD switches/VNAV-LNAV/CMD buttons. Is it then possible to push these buttons by myself on the MCP or is that the start of many conflicts. I hope that you understand what I mean, (english is not my native language) many thanks in advance for replys. I would like very much to get a MCP and/or EFIS but I want to use FS2Crew furthermore.

Using the Ifly 737 button version, I cannot for the life of me figure out how to start the countdown timer?

No problems with v1.3 and assigning main button (de-ice) and secondary (prop synch). However, after I installed v2.0, I no longer can hear main button voice, only secondary. I went back and deleted and reassigned buttons several times and the same issue occurred. When I uninstall v2.0/2.1 and just use 1.3, it works fine. Any assistance? Thanks! Rich Perry

In the post below, it talks about being able to resize the panel for those who want to. http://forum.avsim.n...wg#entry2002802 Could you tell me the line where to change to zero to a one. Thanks Jim CYWG

Is it possible to have the gauge visible in full screen mode. With that I mean no cockpit visible , just out of the window. Thanks Graham REX - 801839

Hi I have the latest feature pack for the IFLY 737 and notice some thing with the BBJ (BBJ1 in this case) after landing ..... while doing the after landing flow i hear TCAS TEST OK , i dont recall hearing it with the standard 737s so some thing may be amiss with the BBJ Rich

Good day. I am running my fs2crew for fs2004 on a windows 7 home premium 64 bit machine. All of fs2crew is working well but the crew does not work. In the cfg panel the crew region box is empty and no audio can be heard. This includes the PA's that the captain make. Any suggestions? (I have reinstalled it but it didn't solve the problem.)

HI, I purchased recently P3D and the version of Ifly B737 for Prepar3D. I tried to install FS2Crew for FSX in the Prepar3D directory. No success, however, the plane takes weird positions at the start and P3D sees the flight as crashed. Will there a compatible version becoming available soon ? Thanks, Hugo

Hi everyone, I've noticed at certain points my FS now judders. I know it's doing a little extra now but is there anything I can do to prevent this. I've noticed some display items were updated. Could this be it ? Has it changed any of my settings during the install. Any help or pointers much appreciated. Thanks Graham REX - 801839

Hi, Can someone run through how FS2CREW and anti icing are integrated. I've always been under the impression ( maybe wrongly ) that unless it was below -10 degrees , engine and wing anti icing should remain off. So . . . .unless extremely cold on dep/arr anti icing should be off but . . . . Most flights with crz levels above 10,000 feet will require anti icing both engine and wing. So who monitors this and switches it on accordingly. If on for takeoff, fs2crew seems to switch wing anti icing off during the climb. Can someone explain the logic of all this so I can explain the correct procedure. Thanks Graham By the way I just love ifly 737 and fs2…

Although trans alt is set in descent forecast pages, PNF still goes by alt set performance pages when changing baro settings. Is this correct? REX - 801839