Is there a way to turn off all the first officer inputs so I can do it all me self

Otherwise, could this be a feature in a future update?  It would make FS2crew even more realistic.  

I have some font problems with FSX effecting some add ons .. the Wilco Airbus ..IFLY 737 and FS2CREW for the IFLY ....i dont have these problems with FS9 , i will try and get a screen shot later but i wondered what FONT FS2CREW uses for the display window ? and were its put ? .. as i said i have no problems at all with FS9 on the same PC .

Thanks

Rich

I have the iFly 737NG in P3D V4.2 running FS2Crew Button edition (V2.4). After takeoff, the Captain gives the command "Gear Up" and the FO raises the landing gear level to the "UP" position and then after the lights go out, the FO states "Gear Up Lights Out". In the After Takeoff Checklist, the FO reports "Landing Gear Up and Off" but in my installation, the FO never put the gear handle into the "OFF" position even though he later reported that it is "OFF". I have tried multiple times. Is there an issue with my installation or is it maybe the Captain who puts the gear in "OFF"? Thanks!

Right before TD I click on  descent  check list and p3d stops working and crashes.

Can you please  help ?

I looked at the event viewer and...

Faulting application name: Prepar3D.exe, version: 3.4.22.19868, time stamp: 0x588f7cbf
Faulting module name: FS2AUDIO.dll, version: 0.0.0.0, time stamp: 0x4bb01ad3
Exception code: 0xc0000005
Fault offset: 0x0004400c
Faulting process id: 0x34f8
Faulting application start time: 0x01d3bec721c50038
Faulting application path: D:\Lockheed Martin\Prepar3D v3\Prepar3D.exe
Faulting module path: C:\WINDOWS\SYSTEM32\FS2AUDIO.dll
Report Id: 4e9cd8eb-c6ea-4bb6-b2c4-1f0e56e63d44
Faulting package full name: 
Faulting package-relative application ID: 

Thanks

I have just undergone a full reinstall of FS2004 on a reformatted SSD. All of that is fine.

Today, I did a full reinstall of IFly 737 with updates 3.1, 3.2.1and 3.2.2.

Reinstalled FS2Crew (button) ... program files/my products

I then went into the IFly configuration manager (run as administrator) clicked on button control and am "dinged" and advised that FSD2Crew is not installed.

I tried to install it into my FS2004 SSD (own folder named FS2Crew) and the same results.

Surfed through all 15 pages of topics but cannot find anything to do with "Not installed" but I did notice that there was a major update in 2011.  I purchased the IFly DVD and bundle in 2013 and I am wondering if this update is applicable.

This programme has previously been installed and after a few clitches (read operator error) the programme worked flawlessly. 

Can someone please help me here. I hope I have supplied enough information.

Regards

Tony

Hopefully this will be a quickie.

I have had this product now for some two years. In that time, despite playing around in the config I cannot get the doors to open with the steps coming down.

As I fly the BBJ3 I would imagine that there would not be too many instances where the aircraft is "gated" at a dock.

Can someone tell me in small steps how I can get the steps to come down.  I do not have any AES programmes, although I would dearly love one if anyone can suggest a good one that is either free or payware (not Aerosoft  AES as I fly mainly in Australia and they bless us with a total of three payware airports where it works)

What do I have to turn on and what do I turn off.

I would be really grateful for any information that will get me the steps and any info on the airport enhancements would be greeted gleefully.

Thanks guys n girls

Tony Chilcott

unfortunately I'm back after a short period of time.

Now I have the issue, that the PNF announces the setting of flaps (even on the ground or airborne), but there is no reaction by the plane, the flaps stay where they are. I have to move them by myself.

As I know it from the MD11 that it is not good to change the views during FS2Crew action, I'm really aware of not doing it. I have not really an Idea, why it is not working. Maybe you can help me in this case too?

I've a curious problem with the Main Button - and only with it! Regardless what Joystick button or Keyboard I assign for it, nothing happens! The Second Button works properly on my Joystick.

Well, let's talk about troubleshooting. There's no double assignment neither of the Joystick button nor of the Keyboard commands. Also in the FSUIPC is no assignment for the two buttons. Other Joystick Buttons and Keyboard Buttons are also not working for the Main Button. I'm now at the end with my suggestions. Do you have an Idea what can solve the Problem? Help very appreciated!

Btw. FS2Crew is v2.2A, the iFly is up to date with SP 3.2.2

Thx for your help in advance! I would be so happy if you can help me fixing this issue, as I am so happy with my MD11-ButtonControl since many flights and the new Panel in the iFly makes even more fun!

just wondering if the iFly 737 is on your list for a 64bit facelift? (fingers crossed)

i have FS 9 and the ifly 737. I bought FS2crew (bundle voice and button) for ifly at aerosoft yesterday and installed the Button version for the Ifly. I can start the program and can hear the different announcement for the passenger. But if I want to start the preflight checklist with the main button x or the “Run PF” I hear , the pilot says "the Preflight checklist" , and then the FS 9 crashes. The window of FS9 becomes black. I always use the window mode. windows explains a mistake with the FS2crewIfly737.gau. This file is in the subgauge folder of the fs2crew folder

[FS2CrewData]

Accent=0

Volume=3

USBDevice=3

AES=0

Doors=1

GateDep=1

GateArr=1

PbUnits=0

PbDist=4

Greetings Sven

   In a different thread I've found how you purchase FS2CREW and get it working in v3.4 of P3D  (remember to look at the v2 information as the joystick key assignments changed between v1 and v2 of FS2CREW)

 To get the VideoMarshaller going is also quite easy... The solution is :-

1. Copy the FSVM gauge file (from your FSVideoMarshaller\gauge directory) to the root gauges folder in the P3D V3 folder 

2. Copy the whole FSVideoMarshaller directory to P3D (so it becomes a sub-directory in P3D) - or you can MKLINK if you know what I mean

3. Now the trick.... go to your P3D directory.. and using notepad or any other tool.. create a file called FSX.EXE (doesn't have to be a program.. can be an empty file !). The videoMarshaller guage is checking for an FSX.EXE followed by FS9.exe in the P3D directory and this little trick fools it into finding what it needs to know...

You should now find when you use P3D the video marshaller also now works..

Cheers

Gary

  It's a long shot purchasing a product that isn't supported for P3d but it looks so good with iFly 737 !

  I've installed the product into the C:\FS2CREW directory (it seems strange on re-install it doesn't know this...)

  P3D is installed in C:\P3D.. and iFly 737 is the cockpit builders edition (all SP's loaded etc..) - system is Windows 10 / 64.

  After install moved the gauge file... and then wen't to fire it up..  on clicking the standby altitude indicator - I get an error of "Invalid XGS Path" / Please contact FS2Crew.  Error code 0x80070057

  Display panel then appears.. but nowt is working in terms of it doing something (or saying something !!).

  Any ideas - my guess is the error code indicates it cannot attach to something.. 

  Cheers

Gary

Latest version of FS2Crew Button and Voice Bundle for iFly 737. (Problem happens on both button and voice.)

Win 10 OS

P3d v3.3.5

Every time I click on the Standby PFD to launch the interface, P3d CTDs

I saw another thread here about a similar problem, where the solution was to copy across the components into the P3d Aircraft folder and then edit the aircraft .cfg file, however, I don't think I understood what it was getting at and haven't done it properly.

I've reinstalled FS2Crew but that hasn't helped. I also launch P3d as an admin and that doesn't help either.

Can anybody help?

I realised, that iFly 737 NG System only calls out V1 at takeoff modus-Not 80 kts or Rotate, because Officer callouts are not simulated- as described in pilots manual/tutorial.

Never mind, because now I am using FS2Crew and my copilot says : 80 kts, Rotate,and also gear up- But the question ist:

The callout V1 simulated by iFly seems to be disappeared. Why?

Proposal for solution are kindly requested.

Thanks and greatings

willi

I purchased this product about a month ago, and everything seems to work ok throughout my flights, but autothrottle.  I completely set up the FMC, and this problem did not exist before I installed FS2crew.  I can physically switch on the auto throttle switch, but TOGA produces nothing in the engines, nor does VNAV/LNAV, and the same with the standard IAS set speed.  

I have a paid version of FSUIPC and the rest of my aircraft does not have this problem (the ifly 747 included).   And, if it's not clear, the 737 auto throttle worked prior to installing FS2crew.

I've searched the internet and can't find any issues relating to mine and I didn't see a troubleshoot in your manuals.  Also, I bought the button and voice combo.

Please help, I like the product and wish it was available for the rest of my addons.

I purchased fs2crew button control version for ifly and have some doubts regarding which version is the current one for button control? I purchased this product from flightsimstore, and in the user manual, it is written as version 1.6, but may i please know what is the version given with fligthsimstore download? and where can i find the updates if any to button control version for ifly?

Also i have some doubts wrt this product.

1. Rather than FO doing all the test checks and other things on overhead panel, i would like to carry out all that. So by not choosing run PF in cfg of fs2crew, this would be enabled right?

2. Does fs2crew provides rotate and V2 callous also on take off run in ifly?

3. In order to start the departure brief, what is the option i should choose? Also the tutorial that comes with this is not detailed and difficult to understand. How do i start a checklist in a given item? And also, once checklist is being initiated and FO calls the item, for eg engine generators ON, when i set this to ON, would he automatically go to next item in checklist? is this how fs2crew is modelled? Like, FO calls an item, i follow it and set as per he said and then he will move on to the next item.

If only the tutorial was a bit detailed and less confusing, i would not have had these doubts.

thanking you

govind

Thanks

David Hawley

I have the button control version I used on my FS2004 IFly 737. Will this version install and work on my FSX IFly 737?

Thanks

Stephen