Button Control Version

Hello, My question is if Fscrew pmdg 737 ngx button version have the comand to turn on "Yaw Damper" or not after engines runing. I have to do that manualy allways. After the fscrew update nothing change about that. Maybe Fscrew have a solution ? regards One thing more, way fscrew doesn't have "flaps 25" on approche ? thanks

The title may not make sense but when you go to do the decent brief it says minimums. I know it is the "minimums" and what it is and all that but I don't know what to set it to. I just set it to 300 ft all the time. I have PFPX and TOPCAT installed.

Hi Everyone: I am going crazy here. I am trying to use FS2Crew NGX Button version. Until recently, I could always play all the audio through my headset, but now, much of the expected dialogue only plays when I have my speakers on. I have tried it with the Headset (HS) button on, and off as well. I have 4 audio choices in the CFG panel to choose from, and I have tried all 4 of those - and I am still getting mixed results. My sound card is an M Audio Delta AP192 sound-card. My 4 choices in the CFG panel (and also on the PMDG 737 sound options menu) are as follows: "Line 1/2 (3 M Audio Delta AP 192)" "Realtek Digital Output (Realtek High Definition Audio)" "R…

HELP I have the latest version but no FS2CREW in FSX game PLEASE HELP?????????? I have the PMDG 737-800-900NGX but no crew in cockpit. I have button control

Hi, I looked for an answer in the forum, but I could not fine a precise answer. How exactly do you do to start the engine with the APU and do the preflight with the external power. The idea is to do the preflight with the external power and, before push, switch on the APU to start the engine during pushup. This is how I did things before getting FS2Crew. Would you know what the exact procedure is ? Thanks ! Olivier Noir

Hi all I recently re installed my pmdg 737 cause I had some problems with v pilot. However, after reinstalling it (inc sp1C) and enabling fs2crew, I Always get a SDK error. I tried reinstalling again. Without success. Do I also have to deinstall fs2crew to be able to use it again? vkr victor ps: I would add a log or such, if I knew where to find it.

Good morning Any chance of getting an update for NGX that solve the issues that force to use 2D panel while Ezdok uses 3D? I mean, a direct solution instead of using different alternative ways that makes it more difficult. Thanks very much

I start passenger loading but I don't hear any passengers loading the plane. I have the cabin volume set on high. Can anyone tell me why I am not hearing any paseengers boarding ?

Hello all I'm now in the phase that I'm not able to fly without the fs2crew, so much fun it is to know that you are not alone in the plane. However, I used to have passenger x, which allowed me to have a dutch cabin crew announcements etc. That is the only thing I don't like. which are the announcements (I ant to hear the people applaud when I land for example, haha ). is there a way to add/ alter the sounds in fs2crew? Create my own pack so speak? vkr victor roos

hi i cant get the pmdg77 fs2crew to work i added the command buttons but still not working any ideas please regards martin

Hi to all!, i would like to ask, if there is an option / posibility to change the landing checklist sequence (or the others checklists also ). My preffered RYR landing checklist is ENGINE START SWS CONT RECALL CHECKED SPEEDBRAKE ARMED, GREEN LIGHT LANDING GEAR DOWN , 3 GREEN AUTOBRAKE ___ SET FLAPS ___ GREEN LIGHT LANDING LIGHTS ON Thanks ! Gerasimos Stamatatos

Hi Is it possible to buy just the butten version of this aircraft. brian

I want to stop begin starting my flights from long or short panel state, but I don't know how to do it correctly together with FS2CREW... What I have tried is loading the state I want, then pressing "RUN PF" but the FO startes doing the same flow as he does from "cold and dark"... Why? A step-by-step guide would have been awesome! Øystein Johansen #25456

Hi there since i have the Button Control i got some microstutter everytime when i open/close the control panel in VC! Is this normal? While with the Button Control Panel in Airbus Ext. i have not this problem! Thx Max

Hello, i have a question. I installed the FS2Crew PMDG 737 NGX Button Control and have a Problem with the "BR-Button" If i click on it i hear just the Sound but the window does not open. Can somebody help me? Sorry for my bad english. Best regarts

Hi Bryan (and others), Last week I purchased the Special Bundle Pack. After installing however my sim suffers from performance loss. Some frame rate decrease, photoscenery (NL2000) looks a bit blurry and worst the water looks like a tablecloth, frozen, less detail. I didn't expect since serious performance impact is not known, as far as I can read elsewhere. Any thoughts? I btw followed the manual and 'troubleshooting' and finally tried to uninstall and system restore, but the old textures/scenery haven't returned. After uninstall I only see minor fps improvement and clear photoscenery almost only directly below the aircraft. I'd appreciate your input, thanks in…

Hello, I've been using fs2 crew button control for a few months but now all the sudden my keyboard commands arent working. My keyboard works with fsx just not with fs2 crew. I don't know how to fix this or why this happened.

Using the push-back from Secondary Button as opposed to the GSX pushback, which IMHO, is much more realistic, why is it that the FS2Crew push-back takes the aircraft so far back at a shallow angle that I'm almost into the jetways on the other side, as was at KIAD, whereas the GSX push-back is spot-on? Is there a way to integrate the GSX push-back into that Button Control menu, or would I be best just to bypass the FS2Crew Secondary Button's push-back request and opt for the GSX menu only?

Hi Bryan, I know you are probably busy getting the 777 version of FS2Crew ready for the awaiting SDK from PMDG, however I was reading some airport information and came across ground radar information which states that transponders should be turned on before pushback or taxi which ever is first. With so many larger airports getting ground radar, I know it makes no difference in FSX, would it be possible for an update to give the option of transponder at this time instead of the runway entry procedure? Thanks Craig

When I load the aircraft it loads in active state with engines already started. I can open The Main Panel and the Configuration Panel. Voices from FO etc all working. I have loaded the Service pack 1C, running the program as Administrator and I have configured Flight Simulator correctly with 2D panel etc. I tried a number of times but it keeps doing the same thing. When I then proceed with the first checklist I hear a warning that tells me that FS2Crew has not be loaded correctly and to seek help from the technical forum. Any ideas ?

Hi, I have NGX button version 2.3 which was running perfectly on onboard sound chip. Due to additional need, I have just installed sound card on my PC. However, I have difficulties to assign FS2Crew to use the new sound card. In the configuration panel, I had selected the new sound card. . However when I run the test, the voice came from the onboard sound card. Please help. Thanks in advance.

Hello! For some reason I can't open the control panel by clicking on the usual spot in the VC but when I change view to the 2D panel it works fine. I'm loading the A/C as instructed in 2D mode. Any clue?

Can anyone help with my problem. My Saitek Flight Pro yoke works through FSUIPC so the controller is disabled in FSX. So the recommended button and keys do not work alt static source and prop sync options. what settings can I use in FSUIPC to do the same thing.for FS2 crew.

I have a few problems with my FS2Crew for my NGX. I will list what I know of and you guys can comment on the issues you want to question/answer 1: The F/O never says "Transition level" when he is suppose to. I usually have it at 7000 feet, and I have assured that it is both set correct in DES FORCAST page and PERF INIT page. It is random when he says this. 2: The F/O always get in contact with the cabin crew and says that "the cabin is secured" mid cruise. Shouldn't this happen after I have turned on the seat belt sign? 3: During DES/APP, the F/O always says "we are not stabilized" and "Localizer deviation". And one question: If I want to start wit…

good afternoon Have in mind include support for third-party app like GSX? best regards Jonathan Alatriste