FSX/FSX-SE Aircraft and Panel Design Forum - How To

If a gauge coordinate is written 0, 0, 1, 1, how will that appear visually in the cockpit? Is that actually an invisible gauge?

Hello, I hope you don’t mind me asking about this issue here on this forum, my reason for doing so is that I have raised it on the Captainsim forum but I have not had any response. I have the full suite of 727 Captain variants (Base Pack and the 3 expansion packs that complement it), all with the latest version of the 727 Captain released which is 2.7. All are installed within FSX Accelerator. My problem, is only with all of the 200 variants (both passenger and Freighter, the 100 variants are working just fine). The issue I have is that as soon as I start to taxi on the ground or even use the FSX pushback option at any airport with any of the 200 variants, …

Is there away to import FSX gauges into FSPS. I have the latest version but the gauges in FSPS is way out of date. I need gauges like the B737-800 PDF, MFD EICAS, Throttle etc.

Were can I buy circuit boards .

yes I back again this time i want to add some personal modification to Skyspirit 2021/ERS Embraer E-jet 170 the plane has bad performance as it bug out while on the ground looking for tips to stop this. is there tutorial on night lighting and adding wingveiw while in V-cockpit view one can see the wings and engines and adding the E-jet Canted look.

Hello, I've made several virtual touchscreen instrument panels using Air Manager, but now I'd like to add my own knobs using rotary controllers approximately the same size as the knobs on standard aircraft instruments for a 3D printed overlay the 24" display that I'm using for Air Manager. I can do basic wiring and electronics, so if there are some kits or instructions on how to do this, please let me know

Hope someone here might help as I was looking for info for days on the web but found nothing. I am a FSX user and fly only the B737-800 default, no 3rd party aircraft. So I build myself a MCP based specific on the B737-800 default MCP (auto pilot panel) and use FSUIPC to configure it via Mobiflight. All is working fine. But on the default B737-800 MCP there is button VOR LOC. When hover with the mouse over VOR LOC button the help tip says "Nav Hold switch" So I am looking for FSUIPC Event ID or Offset. I did search through FSUIPC documentation but could not find anything not anywhere web wise.

In the past there was a company called MacPhat Studios that sold a cockpit upgrade for this plane. The link in the store is dead and according Coolsky this company does not exist any more. I found about this kit on this forum. There was a topic about it dated 2013, so a very long time ago. I would love to have this upgrade. I do not know it it is illegal in this case to ask if somebody could help me with a copy of the highest resolution blue panels . The reason I want this is to ease my old eyes with better readable labels on the panels. If not possible, is there a way I can "overhaul" them myself ? I have done this a few times in Xplane but I am rather new in P3…

Hello. The project site does not work outwardly . I have a question - can anyone enumerate fully what models of aircraft the developers of the Project Open Sky have created for FSX? .Models of Project Open Sky is accurate and easy. Help me find out what models was created by developers of Project Open Sky. Thanks in advance everyone who will respond. Respect

Hi everyone, I have been searching and asking this question everywhere I can find on the net. I have Windows 10 and am flying FSX w/Accel. I am trying to upgrade a panel for the A350 and have run into a problem. The .bmp of the main panel I have has a "slanted" gauge position in the left, and I would like to make the gauge(s) fit it. I have FS Panel Studio for FSX, but I can't find any instructions about doing this. Can someone tell me if this is possible and how to do it? Thank You

I recently downloaded Chuck Dome's Subsonex and Subsonex2. I have repainted several of my downloaded aircraft in the past. When I go to the textures folder on both these aircraft I cannot find the needed file to repaint the aircrafts. I obviously am not familiar with this technique of an aircraft without a texture file in the folder. Can anyone give me a hint of how I go about extracting the texture needed to do a repaint on the aircraft. I guess however he does it, it does keep some people from repainting. Thanks for any reply.

I am not sure if this is the correct place. I recently installed the Thomas Ruth A310 for P3D v5.2 . Over all,it's not bad at all,for freeware. My issue is I cannot tune the ILS or VOR frequencies. I click on them,but they will not change from 113.7 I tried changing the [radios] section to: [Radios] audio.1=1 com.1=1, 1 com.2=1, 1 nav.1=1, 0, 1 nav.2=1, 0, 0 adf.1=1 transponder.1=1 marker.1=1 But no luck. Thank you

Hello All, I recently installed the LJ-45 Panel into the Iris Global Express. The 2-D panel works fine, however, the VC panels instruments'gauges do not show up. There is a .cab folder that contains over 600+ files. I'm not sure where to unzip the cab file to. If I could find the correct path to place the cab files contents, I believe the VC would work. Any suggestions? FSX WIN7 Dennis

Is there a program that can be used to easily edit and add gauges to the VC. I have FS Panel Studio but it appears it only edits the 2d panel. Thanks for any help.

Hi. I can't figure out how to install the gauge in the VC...the pop up works so I know its reading it. I put the line in the spot per instructions but no luck. [VCockpit02] size_mm=512 pixel_size=512 texture=$CRJ_2 background_color=0,0,0 gauge00=HoneywellFMC!fmc, 0,0,325,512 gauge01=Bombardier_CRJ_700!CRJ700Systems, 0,0,0,0 gauge02=dsd_fsx_xml_sound!Sound, 0,0,0,0, ./sound/DH_CRJ/XMLSound_default.ini gauge03=GPWS4!GPWS_Masterwarn,500,100,0,0

There was a Panel restore utility that could have been downloaded from http://www.casawave.fr/upload/fsx/Panel_Position.zip. But web site message "Page Not Found". Is there someone that still have this utility.

Does anybody know how to calculate Density Altitude (ft) from A:vars availiable In FSX? I am trying to modyfy TextInfoGauge by Rick Federmann to show Density altitude, but I cannot find any way to calculate it from A:vars availiable in FSX. Any help is welcome! -ernst

Hello, Im Carlen. Can anyone help me why is my trees in FSX Is Missing? The Tree is black, So When i download Airport scenery from flyaway simulation, and i upload it to fsx. When i click fly now the trees are all black

Hello All, I mostly run all aircraft with Flight1's GTN750 or GTN 650. Lately I been getting back to flying VOR/ DME / NDB for fun. I'll still use the GTN 750 in non GPS mode But would like to add a window with the FSX stock gauges for old school flying. Any help in creating this much appreciated. I'm using the stock FSX radio stack to avoid conflicts and easy on frame rates. Thanks in advance //------------------------------------------------ [WindowXX] BACKGROUND_COLOR=2,2,2 size_mm=156,308 *** This will need resizing position=8 visible=0 ident=RADIO_STACK_PANEL *** Wont need this ***//gauge00=Bendix_King_Radio!Bendix-King…

Hi all, I have the 'Alabeo' C310R I love this bird. My only complaint is at night I cant get ALL the panel gauges to illuminate without having the overhead whole cabin light on! Aaarghh! Hey it's great for reading charts etc. but really distracts from night flying and especially approaches. (I'm using FSX) Any panel / lighting geniuses her have a work around. Thanks to Bert and a few others here I've had some success modifying a few windows and VCpanels but I haven't solved this one.. Thanks in advance Link below shows a pic of the 310R panel properly lit with all gauges illuminated correctly without the overhead dome light lighting the whole cabin up…

Hi, how do I assign a camera definition found in an aircraft's aircraft.cfg file to a joystick button in P3Dv4? Thank you. For example: pressing joystick button 1 (the trigger button) will bring up this view. CameraDefinition.0] Title = "Right Wing" Guid = {cda65811-9e4b-4492-a466-c7148f0aaac3} Description = View from the right wing tip looking at the cockpit Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 1.0 ShowWeather = Yes InitialXyz = 10.0, 1.0, 0 InitialPbh = 5, 0, 270 XyzAdjust = TRUE Category=Aircraft Cl…

If I were to install a repaint package for default aircraft and there were liveries included that would be out of place in airports I fly to would I be able to turn them off by adding // next to that fltsm number in the aircraft cfg? Thanks

Went to register Add-it pro and found the website to no longer be active. Through doing some searches, found that the creator of Addit pro died this past March. Does anyone have a registration that will allow me to use this software. I was having problems with gauges and it identified the problem and resolved it for me. As an alternative, does anyone know of a package that allows adding of gauges and panels to aircraft, and other customizations? Thanks all, John Gould Almostgem

so my problem is a bit weird but i would love to get some help I am taking care of tech stuff for a full piper archer simulator at an aviation school its the archer RTD from Frasca and its using 2 430's by RXP the one problem we have is there is no DME in the sim... so i decided to try some stuff. i added a pop up 2d DME panel to the panel.cfg and this way i thought that when i will tune a nav freq on the 430 the dme will show but it didn't work. after adding the radio panels to try to see if the freq is tuning only in the GPS or in the sim too i sew that all of the nav radios and freq in the sim are stuck at 100.0 (picture attached-http://prntscr…

Hi everyone. I have a 3d model of the Seversky P35/ AT12 Guardsman. i got from a friend. I do not know anything about modding and was hoping since i have the model. I could find someone who could bring it to FSX and P3D. The model will be freeware. so everyone can enjoy it. If anyone can help and take the project please PM me and i will send you the model. The AT12 Guardsman is the last remaining model of this plane that is 100% and flyable. And can be found at the Planes of Fame air Museum in Chino California. Thanks. Craig. Here are some picts of the P35 and AT12. P35 AT12