FS2CREW: FLY BY WIRE A32NX PROJECT

Hi, I am getting this error when trying to start from the command center: "Warning: External FS2Crew Command Center program not running. Cmd center now inop. Probable EXE.xml corruption problem. See FS2Crew Support forum." I have tried all 5 solutions in the FAQ. I can start FS2Crew manually though, but every time it gets focus, the Windows taskbar gets visible which is quite annoying.

i have both FS2Crew and FS2PushBackExpress i downloaded the new tool bar when i use it to open PushBack Express it works just fine but when i select FS2CREW Fly By Wire A32NX Project i get an error but if i open FS2Crew manually it open just fine but it looks like the old version even though i just went to justflight.com and downloaded the newest version

hi, I always get the message: unable to read aircraft and simulation data via the FS2Crew WASM Modul. he tells me to restart MSFS but it's not working. I reinstalled FS2Crew several times. After reinstalling it works but when I shut down my Computer and start it later again the error message appears again. and now I have the same message with PBE. (still 2.1; got it from Aerosoft). I installed A32NX and PBE where it has to be (cant change it anyway) and MSFS is on another Disk. (and I changed the Package folder from C to the other Disk where MSFS is. the fs2crew-data-proc.wasm Modul is in the Community folder on the other disk. any advise? thanks Klaus

Hallo, today i did purchase FS2Creew add on for Fbw A320 and its crashing my game every time when is installed. I tried on with or without VATSIM (vPilot) but resault is same. Sometimes crashes after 5 minutes, sometimes after 30, there is no rules, but every time crash and give the strange error notificatios, one of them is: Exception from HRESULT: 0xC000014B. I tried with uninstalling this addon and changing the location folder (several times) but didnt halped. After add on was removed, FS2020 is working normaly (at least i tried short 30 min flight and was going without any problems). Any idea?

Hi, However thrilled I am with flying the FBW A32NX in multi crew ops, I have encountered one bug that is causing some problems. After takeoff and the appropriate retraction of gear and flaps, I call for "After takeoff checklist" (or alternatively "Climb checklist") as instructed by the hint in the FS2Crew interface. However this voice command is not picked up by the program. Ultimately I have found no solution for this beyond announcing "You have control", which forces the flight state to cruise, after which I have the usual cruise mode options, and can resume the flight, but this is just a workaround. Can anyone (devs especially) reproduce thi…

Starting yesterday I get the error message Unable to read aircraft and simulation data via the FS2Crew WASM module. Yes, I have done my homework and checked if the module is 1.0 and it is. I installed the new beta this morning but it started yesterday afternoon for no reason really. I am using the newest dev version of the FBW but even trying the stable did not work. Any ideas other that the wrong WASM module?

While running through the After Start Checklist, I get down to where the FO/PNF says "Pitch Trim". I attempt to respond with "ZERO SET" and get no reply. My old trust "SKIP" doesn't seem to work either. Are these the correct responses or am I doing something wrong? I had a similar issue on my first approach with FS2CREW when I started the Approach Checklist and got down to "Minimum" and didn't get a response, requiring me to cancel the whole checklist like I did with the After Start. For reference, FS2CREW hasn't published a reference manual for the Voice Control yet, have they? Thank you.

I did a quick flight last night from a starting position with just stairs and in the fs2crew / pbe mixed scenario I'm running the pre-flight events only from fs2crew as instructed (I think you even removed the button from pbe in the latest beta if I remember correctly). Could you migrate over the code you added to pbe to keep the stairs connected to fs2crew? I was also using self loading cargo and the stairs kept disconnecting which stops the boarding of passengers. I know I can just open the door without stairs, but I opened the ground control section of pbe and used the stairs button from there, which connected and kept them there. When it was time to go though pbe…

I have had an issue since installing FS2CREW where i get random pushbacks when staring the APU i have since uninstalled the program but it still keeps happening. Any help would be greatly received.

Hi. I am experiencing issues with my voice recognition in fs2crew FBW a32nx version. Its works perfectly in PBE...... but in a32nx it rarely understands what i say and i have to repeat myself many times or move to button control which is very annoying since i fly parts of the flight in VR.. I'm using LifeChat LX-300. Please advise.

So just upgraded my PC to windows 11 and as a result the FS2C no longer starts nor data-proc. Once I uninstalled both PBE and FBW Project everything else ran like clockwork. I did try installing version 1.1 b4 but still had issues with command center loading. What actually happens is you get to 75% of loading from the flight plan and then it just sits at this point

Hi! I recently bought FS2CREW and become again and again an error after the FS2Crew-Setup. Any suggestions? THANKS and regards aua370

After the installation of Public Beta 2 Update the Voice Control Button is not working anymore. When i push the mic button with the mouse evething works as it should be but whatever keyboard button i assign for the function is not working.

Hi I understand that the license key is now stored on the computer. Recently I updated my M/B Bios and my key needed to be revalidated. I'm now going to upgrade my CPU, so my question is, does the key need to be re-validated again as not sure where its stored (MB or CPU)

Hello 🙂 I have the following problem: I want to go into the settings but the window for it opens but is invisible. I have 2 screens and the main program is then on the 1 screen and the settings window on the 2 screen. I only know this because I have the icon in the taskbar and I can only close it from there, because I can't see it. Pretty stupid, I've never used it since I got it, because I just can't get into the settings. I've already reinstalled it. Doesn't help. Thanks in advance 🙂 Translated with www.DeepL.com/Translator (free version)

If you're starting from cold and dark at a gate, is it required to run the PFE? I know it says optional, but if I'm starting from a C&D state, what is the 1st thing I need to do if I'm going to skip the PFE? Also I noticed the jetways aren't connected automatically. But they do connect automatically when I park at the gate.

Just purchased this today and installed the latest 1.1 beta so far so good great work Bryan

Recently, I have been having some issues when using FS2Crew A32nx whereby it will bring up the Windows taskbar every time I click on the FS2Crew control panel (I'm using Button Control) and the taskbar would hide once I click outside he control panel. I am not sure what happened as I remember this issue did not happen during the initial install and launch after I purchased it. I am now on version 1.1 and still the same issue. Perhaps it may not be a FS2Crew issue but any advise or help is appreciated. Thanks.

After takeoff with packs off and make the reduction in thrust and set them to climb, first oficer doesn't set the packs to on, also when you are clear for takeoff it doesn't set the transponder to on it only leave it in auto

Do you plan adding additional call signs to the app? Like UNITED?

Fly By Wire has released a new "Stable" version (v.0.7), that should have the same functionality as the old "Development version". Anyone notice any new issues with FS2Crew with this new version?

Hi, I tried searching for a similar topic about this, but I couldn't find anything specific. So basically, I set my FO to control lights (to simplify the process). However, there are a few behaviour that I noticed when they do. When the FO turn on the Wing Lights (I assume during their walkaround) the Wing Lights only turns on for one side. I have to switch off the wing lights first then switch it back on to have both wing lights turn on. (see video below at 18:30 mark) When I start for my taxiing, the FO also turns on the Taxi lights, but the Runway Turn Off Lights also behave the same way as the Wing Lights. It only turns on one side instead of both. Ag…

Seriously? ONLY site. NO other issues and pc clean. Fortunately my son wasn't standing next to me!!

Hey, I just want to say firstly that I'm really enjoyng the software, I'm almost at the point in my flows where I don't even have to look at the info pane for my checklist prompts. Anyway, I noticed a glitch last night within open mic mode, I'm not sure if anybody has noticed it or had the same issue. In the middle of the flight at cruise altitude I noticed the F/O saying "Check" when the headset was lying on the desk without me talking. He then began to repeat the word "check" 4 or 5 times in a row. It was prompted by both an SRS and Flare callout from the Captain but here's the weird part, not only was I not wearing the headset, it was also on mute so it coul…

Hey Everyone, I am loving the addition of this add on, it really helps in making the experience so much more real I am however, having some persistent issues which I can't seem to work around. To date I have tried a reinstall. I have also trained my voice several times and played around with the CFG to make sure I have the settings correct. My main problem is a lack of response from the AI when I answer a question or give a voice command. I can usually get around this by cancelling a checklist and then repeating the command. An example of this is when needing to do a flight control check. I will always have to cancel the checklist first prior to getting a r…