FS2CREW: FLY BY WIRE A32NX PROJECT

Captains, Team FS2Crew is happy to announce that the long awaited FS2Crew for the FBW A32NX has been released -finally! Download it now at: www.fs2crew.com I know it's been a long wait, but we had to redesign everything from scratch and start new. This is our first major FS2Crew airline crew simulation for MSFS, and the first of many more to come. It's the same concept as the old FS2Crew's, but the style is very different. If you're coming from the old FS2Crew's, it'll take you a few flights to get used to the new interface system. As promised for FS2Crew A320 Flight Crew Button Control owners, the product is currently discounted at 50 percent of…

Updates and Change Logs are now posted here: https://fs2crew.com/fs2crew-change_logs/ Remember: You can obtain the latest update via the Product Manager: https://fs2crew.com/downloads/

FS2Crew users, Please use the FS2Crew Product Manager from now on. It will automatically notify you when updates are available for FS2Crew FBW A32NX! Link: https://fs2crew.com/downloads/ This new Product Manager makes things way easier and better when it comes to installing FS2Crew products and keeping them updated. It also allows us to be able to push out updates very quickly and easily.

Guys, Since most of you are using PBE, I'm posting this here. Please read it.

Guys, I know some of you who are not familiar with that we're trying to do may have been a bit blown away by it all, even with the ASSIST panel there to guide you along. Fair enough. So I spent the last few hours writing a little tutorial for the new people that covers Cold and Dark to Taxi. I wrote it in a conversational style with lots of pictures, so it's very easy to read. It's not dry and technical. Hopefully if you're going "What's a flow?... I'm completely lost in the woods here..." then my little guide will help clear things up for you. It covers Button Control only. Remember if you're new to FS2Crew, you should be starting with Butt…

FS2Crew FBW A32NX FAQs and Quick Help: Question: MSFS is crashing when I attempt to load it. Answer: Delete your EXE.xml file (but make a backup first!), then re-install FS2Crew. FS2Crew will generate a fresh new EXE.xml. We've received reports that the FSUIPC installer is corrupting the EXE.xml with invalid characters, causing the crash for some users, and we wrongly get blamed 😉 To learn where the EXE.xml is located, please see this post: https://forums.flightsimulator.com/t/start-multiple-programs-on-msfs-startup-with-this-exe-xml-tip/350698 Question: Do I need to use the latest Development version of the FBW A32NX. Answe…

I've sent a support ticket, but posting here as well just in case... I've just ordered and received my download link, but there is no serial key in my account. Does it normally take a while to show up?

Hello, For a few weeks, my configuration is not saved. I want to be in "autorespond" mode but I always come back to "button control". I run MSFS and fs2crew in administrator mode. Thanks for the help provided

Hi, I observed that the crew announces meals and other after passing FL200 and then announce "prepare for arrival" after descend above FL200. For many of my flights the cruise altitude is below FL200 (FL180 in general). Is it possible to change FL200 threshold to a lower one e.g. FL180. Better idea : could it be a new parameter in the settings ? thanks and regards, Pack

Hello Input is not accepted by the microphone. micro works, panel fails, micro symbol can be seen in FS2crew, also switches to listen, command is not accepted.

Hi, In this version I did not find a way to ask the FO to repeat the last command of the check list. Some time ATC speaks at the same time... Does this solution works in this version : I'm not able to achieve this, Thanks and regards, Pack

Hello. Before descend and when preparing the aircraft for approach I select the Flaps 3 landing configuration but on fs2crew in button control since there's no approach brief option the system always has the flaps Full command. Am I doing anything wrong? I want to land with flaps 3 configuration.

Hey there, what do you think - is FS2Crew is going to support the new 2022 Checklists and SOPS from Airbus? Feeling somehow "old-fashioned" at the moment... Cheers, Marc

hi all, newbie here. I got FS2CREW FBWA32nx project and the express pushback. Really loving it, although strugulling still but will get there one day soon. So is there any plans on bringing the panel to the VR side of MSFS2020 ? that would be so awesome ! thanks

What does "chinese vpn issue addressed" exactlly mean? I still can not use FBW Project in China.

Hi Bryan, Last week I noticed a problem, using the FS2Crew FBW A32NX project, with regard to the Baggage Services. When running BEFORE START below the line Checklist, WINDOWS/DOORS CLOSED reported 'are you sure'. Checking the ECAM-Doors page I found that main door was closed, and Stairs removed, but Cargo Door was still open and Baggage Services still running. Tried to stop the services via PBE, but didn't work. This morning i repeated the whole procedure, with only JETWAY and BAGGAGE CARTS checked in the FBW Config and all PFE GRD Services unchecked in PBE Config. After the FA message asking if they can close, at about 17 sec before end of the PFE, Stairs are …

I used this software in p3d for the aerosoft airbus and there was an option to play a briefing between the captain and the FO, it was general and always the same but I liked it, made things a bit more realistic. Is there any chance it will be added to the fwb Airbus? At the 'before take off' checklist they check off briefing as completed but they don't do one .. always makes me laugh a bit 😝😋

hi developers... I am using your Fs2Crew for the FBW A 320.Till todayI hadn´t any warning message when starting the software. As well since the last SU 9 everything went fine. For the FBW bus there are a lot of updates in a row. Since today I got a warning message from Fs2Crew as follows: "Unable to read aircraft and simulation data via the FS2Crew WASM module. FS2Crew will not function properly. To help avoid WASM error, only load FS2Crew while in the cockpit. I can say that I load it while in the cockpit, but the error massage came every time?! What might be theproblem? I didn´t change anything belonging to FSUIPC and WASM …

How do I get the pop-up window back when calling the cabin crew via the call button on the overhead panel? Somehow I closed it, and now I does not show up.

Would it be possible to increase/add a delay between me pushing the baro knob in, switching from STD to QNH before reading out the value? So that I can actually have a second or two to turn the dial to the correct value? Maybe something like 2 seconds after the last change to the value in case it's wildly different from the departure one? I know in the voice version I would have to read the value, but in button control the pilot just reads it out while I'm turning the knob and the values often don't match at all, which is kinda weird.

Hello everyone. Following crashing issues, I just discovered that the problem was with the fs2crew software. After reinstalling fs2020 3 times (for 1 week), I finally isolated the problem today. Here are the message of the error code during software installation. " exception EDOMParseError in module "fs2crew_fbwa320nx_autostart.exe at 001E2CF6. un nom contenait un caractère non valide. line : 2 <Simbase.DocumentType="Launch"version="1. Thank you for your help because now when loading fs2020 it cuts and returns to the desktop

Hi windows 11 Ive gone through the Command Center Troubleshooting here is how I have things setup speech properties microsoft speech recogniser 8 for window (englise -uk) and (englise-us) Advanced use this audio devise microphone (realtek(R)audio) config the micorphone and it pickig up my voice run train propfile go into sounds set recording to microphone start msfs 2020 as admin launch application bfw a320 i talk into the mike nothing shows I've done a full unitstall rienstal in case that was the probleml. i can not get this to work at all it's just been a waste of money for me and don't tell me to use button i bought it …

Hello! I'm French, so I'am so sorry for my english. I bought FS2Crew FBW... and it's impossible to get it work with voice control... "Speech recognition engine status: FAILED Detected speech recognizer region: Required soeech recognizer language not detected" I've already read all the instructions, all the language settings stuff, uninstall all audio drivers but nothing works, windows re-install realtek drivers as default... Any ideas or FS2Crew in voice control mode is not compatible wuth Windows 11? Thank you

When I try to load FS2Cew it says Command Center cannot be loaded. I searched for the xml.exe and deleted it. uninstalled the whole FS2cew (v1.036), removed the FS2crew files from community folder. and reinstalled the FS2cew from the product manager (v1.07). But still get the same message. Please help I could load it when I loaded the FS2crww Command center manually, but not through the MSFS 2020 tool bar.

Hi! I was wondering if you could separate and make the cabin announcements optional (such as safety announcement and so on). This in order to be able to use other cabin announcement programms and that FS2Crew does not interfere with them (mainly having 2 audios at the same time). I love FS2Crew but mainly for the cockpit interactions! Thanks!